Bug introduced in 76acc4e146.
The previous CUnit code had logic to select random aesthetic variants
once initially. The new code removed that, as I completely missed its
purpose, assuming that the random selection, being based on a seed,
would pick the same variants every time. This is incorrect because
entity selections can change the RNG calls, thus the variants, and thus
entity appearance can change when the animation changes (typically, a
horse will change color when walking and running).
The solution is to re-introduce the choice of actor selections on CUnit
creation. This makes sure that units don't change their purely-aesthetic
selections when e.g. animations change.
Reported by: Wowgetoffyourcellphone
Tested By: Stan
Differential Revision: https://code.wildfiregames.com/D4205
This was SVN commit r25844.
I think there is a small mismatch between CheckMovement & the vertex
pathfinder when computing passability because one is ray-based and the
other just uses edges. However, it's out of my reach to fix it for now.
This can lead to units being stuck near building edges occasionally.
This introduces an un-intrusive recovery strategy (aka a hack) in
HandleObstructedMove that should get the units unstuck.
Should fix#6114 (to a sufficient extent anyways)
Differential Revision: https://code.wildfiregames.com/D4162
This was SVN commit r25786.
Following 40cbde1925, the minimum pushing force is 0.2. This also
happens to be the maximum pushing force any pair of units can exert on
each other, so they can freely overlap instead of being pushed.
This tweaks settings slightly to fix that problem.
Reported by: marder
Differential Revision: https://code.wildfiregames.com/D4129
This was SVN commit r25748.
Introduced in 40cbde1925
MoveToFormationOffset may be called after the formation controller is
reset, leading to issues. It seems best to trust only
SetMemberOfFormation.
This causes the speed glitch experienced by wow & Valihrant.
Differential Revision: https://code.wildfiregames.com/D4128
This was SVN commit r25747.
As no default values got set, some game settings became NaN, which
triggered exceptions.
This sets sane default.
This also includes better debugging logic in case of exception, so it's
easier to know what happens.
Fixes#6200
Reported by: langbart
Differential Revision: https://code.wildfiregames.com/D4113
This was SVN commit r25736.
This overall decreases the deathball effect from units walking to each
other a bit.
- Fix formations - this cleans up a UnitMotion hack for formations,
making it possible to increase pushing ranges without breaking closely
knit formations like testudo.
- Make MINIMAL_PUSHING and the MOVE_EXTENSION configurable, and add a
STATIC_EXTENSION as well.
- Increase the pushing range significantly, making units sparser.
Differential Revision: https://code.wildfiregames.com/D4098
This was SVN commit r25708.
Fixes 592453c62f
wasObstructed and wentStraight are not reset when Move() isn't called,
but PostMove may still be called (if the unit was pushed). This will
OOS.
Differential Revision: https://code.wildfiregames.com/D4088
This was SVN commit r25686.
The pathfinder computations are run asynchronously (and potentially on
the main thread) in-between simulation turns, thus reducing
pathfinder-related lag considerably in common cases.
To make this most efficient, the number of paths computed during a turn
via MaxSameTurnMoves is reduced from 64 to 20.
This has a hard dependency on the obstruction manager (via the vertex
pathfinder) not being modified in-between simulation turn (or to put it
more generally on the simulation state not changing outside of turn
computation), otherwise results will be non-deterministic and go OOS.
This is currently entirely safe (as in, it indeed does not happen that
the simulation state changes in-between turn), but future work towards
improving simulation sandboxing would be good.
Thanks to Kuba386 for maintaining & improving the patch in 2020
Thanks to everyone who tested the various iterations of this patch.
Fixes#4324
Differential Revision: https://code.wildfiregames.com/D14
This was SVN commit r25657.
Reduces the 'clumpiness' of units, particularly when ordered to move to
a single point. The minimum pushing force was increased to compensate.
Differential Revision: https://code.wildfiregames.com/D3978
This was SVN commit r25479.
This makes incremental recompilation faster when changing static
interned strings.
Differential Revision: https://code.wildfiregames.com/D3975
This was SVN commit r25457.
ScriptComponent does not use ComponentManager, and its derived classes
(most ICMP*.cpp files) do not either. Therefore, we can skip a lot of
transitive inclusions and speed up recompiling by not including it
there.
Differential Revision: https://code.wildfiregames.com/D3962
This was SVN commit r25447.
This removes usage of CmptPrivate outside of ScriptInterface.
ScriptRequest can now be used to safely recover the scriptInterface from
a JSContext instead of going through ScriptInterface, which allows more
code cleanup.
Follows 34b1920e7b
Differential Revision: https://code.wildfiregames.com/D3963
This was SVN commit r25442.
Follows 34b1920e7b.
JSON functions and ToString are movec to their own headers.
Also clean out a few PersistentRooted usage to use the 2-phase init to
clean up scriptInterface usage.
With these functions split off, we can finally clean out headers and
remove ScriptInterface.h from most of them, in favour of smaller and
more precise headers.
Take the opportunity to clarify some comments regarding Mutability.
Differential Revision: https://code.wildfiregames.com/D3961
This was SVN commit r25434.
Follows 34b1920e7b.
This splits off the object-related functions, such as
[Set/Get/Has]Property, CreateObject, CreateArray, FreezeObject.
It also puts the definitions in the header itself, which might end up
with faster code here & there, though perhaps slower compilation time
(somewhat doubtful since we already included most things anyways).
Differential Revision: https://code.wildfiregames.com/D3956
This was SVN commit r25430.
All ToJSVal/FromJSVal definitions are put in a separate header.
Remove AssignOr[To/From]JSVal duplication.
The functions were already static so this is rather straightforward.
Follows 34b1920e7b and 2bae30c454
Differential Revision: https://code.wildfiregames.com/D3953
This was SVN commit r25428.
Follows 34b1920e7b.
This separates StructuredClone & DeepCopy logic into its own header,
reducing the size of the monolithic ScriptInterface header.
Differential Revision: https://code.wildfiregames.com/D3922
This was SVN commit r25419.
XMB format is bumped to 4, invalidating all cached files. The
differences are:
- element/attribute names are stored after the elements themselves, and
not before. This allows writing XMB data in one pass instead of two.
- names themselves becomes offsets (instead of arbitrary integers),
making getting the string from the int name much more efficient.
XMBFile is renamed to XMBData to clarify that it does not, in fact,
refer to a file on disk.
XMBData::GetElementString is also changed to return a const char*, thus
not creating an std::string. A string_view version is added where
convenient.
The XML->XMB and JS->XMB conversion functions and the corresponding
storage are moved to `ps/XMB`, since that format doesn't particularly
relate to XML. CXeromyces becomes lighter and more focused as a result.
The XML->XMB conversion also benefits from the above streamlining.
Note that in a few cases, string_view gets printed to CLogger via
data(), which is generally not legal, but we know that the strings are
null-terminated here. Our libfmt (version 4) doesn't support
string_view, that would be v5.
Differential Revision: https://code.wildfiregames.com/D3909
This was SVN commit r25375.
We often only need to include ScriptRequest.h and not the full
ScriptInterface.h
Differential Revision: https://code.wildfiregames.com/D3920
This was SVN commit r25366.
TERRAIN_TILE_SIZE is now only used in relevant places in the simulation.
This also makes it mostly possible to use CFixed in constexpr contexts.
Refs #5566
Differential Revision: https://code.wildfiregames.com/D3078
This was SVN commit r25360.
- 25332f9b86 added 'override' to a method in ShaderProgram.cpp. This
adds it to the rest.
- BinarySerializer.cpp had custom JS includes, because putting those in
ScriptExtraHeaders failed. The cause is that gloox leaves "#define
lookup" up. This has been reported upstream, and fixed here.
- VS17 complains about an uninitialised variable, though the usage is
safe.
Differential Revision: https://code.wildfiregames.com/D3916
This was SVN commit r25359.
Finishes work started in f3aedf88a6.
This removes the boost-CPP function wrappers entirely, in favour of pure
templated code in FunctionWrapper.h
The Call* functions were already heavily templated, so there is nothing
really new here. I just use tag dispatch to reduce the number of
overloads slightly.
The new functions do not need the script interface, only the script
request.
Differential Revision: https://code.wildfiregames.com/D3912
This was SVN commit r25354.
The main benefits are more convenient code in the component interfaces
TU and no limit on the # of arguments that can be passed.
Differential Revision: https://code.wildfiregames.com/D3910
This was SVN commit r25350.
This patch is increasing contrast of player colours used on minimap in
minimap component instead of changing player colours themselves to not
mess with other cases, when they are used.
Differential revision: D3242
Comments by: @vladislavbelov, @ValihrAnt, @Freagarach
This was SVN commit r25312.
Emplace does not replace existing element, insert_or_assign does.
While at it:
- Clean up the 'outdated' logic and reuse it for actors
- When an actor fails to load, return a placeholder. This improves
hotloading of broken actors, and makes Cunit behaviour more predictable.
- Some minor cleanup
Reported by: Stan
Fixes#6157
Differential Revision: https://code.wildfiregames.com/D3882
This was SVN commit r25308.
Essentially reverts D1918 / d592bf9cb6.
Instead of copying path requests to workers, setup the result vector,
then setup an index, and compute 'in-place'.
To send messages, the result vectors are read in order. This makes the
order trivially constant no matter how many workers there are, and the
architecture overall makes it much easier to efficiently paralellise.
Tested by: Langbart, Stan
Differential Revision: https://code.wildfiregames.com/D3849
This was SVN commit r25256.
Components have some initialisation-order dependency. They could also
have destroy-order dependency, and from a RAII-like point of view, it
makes sense to do this.
Differential Revision: https://code.wildfiregames.com/D3843
This was SVN commit r25251.
This changes ParamNode to use UTF8 values internally (XMB files are UTF8
since cb9d0733ef).
This removes the need for a lot of conversions, speeding things up and
allows cleaning up the validator interface & a few other callsites.
ConstructJSVal could be a tad slower because of UTF8->16 conversions
within Spidermonkey; but the difference is unlikely to be noticeable in
practica.
Also:
- Changes `ToXML` to `ToXMLString` for clarity.
- Add a simple "op" test & show a particular behaviour of merge nodes
that I intend to change somewhat in D3830.
- Remove Component.h from simulation2 PCH - brought in too much.
Tested by: langbart
Differential Revision: https://code.wildfiregames.com/D3834
This was SVN commit r25228.
An actor file, as referenced by the VisualActor, can now define
different actors for different "quality level" setting.
In this initial version, the quality is handled directly by the object
manager.
Actor format impact:
- '<qualitylevels>' may be used as the root node, containing actor nodes
as children.
- such actor nodes can refer to a file, or to an inline actor, or
simply be inlined.
- such actor nodes may have a 'quality' attribute, specifying the
maximum quality level of this actor. By default, 255 (the maximum) is
implied.
- The actor format remains valid, but 'groups', 'variants', 'material',
'castshadow' and 'float' can be given a [minquality, maxquality[ range
via XML attributes. Outside of this range, the XML node is ignored
(making it possible to define, in a single actor file, several quality
levels).
Quality is a 0-255 value, with:
- Range 0-99 intended for lower level-of-detail actors (billboards,
etc.)
- Range 100-200 the 'normal' range for models. 100 is "low", 150
"medium", and 200 "high".
- Range 201-255 used for higher quality actors that might be used for
e.g. cinematics.
The range is wide to make it easier to add intermediate levels in the
future and it seemed easier given that an integer value of some kind was
required anyways.
Engine impacts:
- A new CActorDef class is introduced, wrapping an art/actors XML file
and its different quality levels. ObjectBase remains the definition of a
given 'actor', now at a given quality level.
- CActorDef imposes a maximal # of quality level for a particular actor
definition (5 currently).
- CUnit is made to refer to an Actor Definition explicitly, not a
particular ObjectBase.
- As a minor optimisation, variation keys are calculated on
pointer-to-sets-of-selections, instead of raw sets-of-selections, as
this reduces copying.
- some refactoring, including better const-correctness and hotloading
support via std::shared_ptr.
Differential Revision: https://code.wildfiregames.com/D3787
This was SVN commit r25210.
This basically does two things:
- Allow turrets on moving entities (fixes serialisation in cmpPos).
- Allow an entity to be present on another when the other is created.
That makes it basically a boiled down version of a prior patch, omitting
the part where orders could be passed on.
This does allow e.g. ranged units on chariots that fire while the
chariot moves.
Original diff by: @sanderd17
Redone by: @Stan
Differential revision: D1958
Comments by: @Alexandermb, @Angen, @bb, @Langbart, @Nescio, @Stan,
@wraitii
Refs. #2577 by implementing the entity on platform case.
This was SVN commit r25192.
The motion manager introduced in bae258f9a1 makes 'chasing' (e.g. an
entity targeting another entity, which also applies to fleeing)
behaviour symmetrical: both units see the initial state instead of it
being ID-dependent.
This allows removing hacks introduced in 6a66fb8205 (and refined in
7b88b1a0f9).
Differential Revision: https://code.wildfiregames.com/D3785
This was SVN commit r25185.
This implements a form of crowd movement that I've generally called
'unit pushing' in the last few years.
Essentially, any two units will push each other away when they're too
close. This makes it possible to ignore unit-unit obstructions, and thus
makes movement much smoother in crowds.
This first iteration of this system only allows pushing between idle
units and between moving units (i.e. a moving unit does not affect an
idle one).
This is because the unitMotion logic to detect it is stuck & needs to
use the pathfinders starts breaking: units can fail to move because they
are pushed away from their intended movement, and the current logic
fails to handle this gracefully.
Thankfully, the most value of this patch in terms of player experience
is found in the improvements to group movements and shuttling.
Other impacts:
- As the short pathfinder is called less often, we can increase the
starting search range & reduce the # of max turns, both improving
collision recovery.
- The performance of idle units is slightly worsened, as they must be
checked for idle-idle collisions. If needed a 'sleeping' system, as used
in physics engine, could be implemented.
- In general, however, expect slight performance improvements, as fewer
short paths are computed.
- Gathering efficiency should increase slightly, since shuttling times
are likely reduced slightly.
- As a sanity change to improve some edge cases (units that say they're
moving, i.e. pushable, but don't actually move), the 'going straight'
logic is turned off if a short path has been computed. This requires a
few cascading changes to work correctly.
Technical notes:
- To reduce the cost of the n^2 comparisons that pushing requires, units
are only compared within a small square on a grid which is lazily
reconstructed each turn. The overhead seems rather small, and this is
much simpler than keeping an up-to-date grid.
- The design is intended to be parallelisable if needed someday.
- The pathfinder's CheckMovement ignores moving units in UnitMotion, as
that is now the spec. Idle units are not ignored, which is required for
the 'collision' detection to work correctly (see above).
Refs #3442 (not fixed - idle units are not pushed by moving units).
Fixes#5084 (the overlap can still happen, but units will push each
other away).
Differential Revision: https://code.wildfiregames.com/D1490
This was SVN commit r25182.
Change the OOS notification logic to remember the OOS-ness of each
client. Reset it on client leave.
The server will thus continue checking for OOS if the OOS-client leaves.
This is convenient to ignore observer OOS, or wait for an OOS player
without restarting the game.
Also add the turn number to the OOS dump, to fix#3348: particularly
following d4c2cf4430 the turn is likely to not be the same between
different clients.
Agree by: asterix
Differential Revision: https://code.wildfiregames.com/D3753
This was SVN commit r25170.
d8ea401a95 replaced the ExploreTerritories logic, but I did not account
for the territory grid being N cells wide when the LOS is N+1.
Therefore, we could get out of bounds.
Reported by: Vladislavbelov
Differential Revision: https://code.wildfiregames.com/D3765
This was SVN commit r25161.
Observers no longer lag the game for players. There is still some time
to serialise the game when sending it to a joining observer, and
depending on the chosen 'max lag' the game may stop while observers
sufficiently catch up, but this impact too is reduced.
- Make the NetServerTurnManager ignore players marked as 'observers' for
the purpose of ending a turn, effectively making it possible for
observers to lag without it affecting the players in any way.
- Add a config option (network.observermaxlag) that specifies how many
turns behind the live game observers are allowed to be. Default to 10
turns, or 2 seconds, to keep them 'largely live'.
- The controller is not treated as an observer.
- Implement a simple UI to show this delay & allow the game to speed up
automatically to try and catch up. This can be deactivated via
network.autocatchup.
- Move network options to the renamed 'Network / Lobby' options page.
- Do not debug_warn/crash when receiving commands from the past -
instead warn and carry on, to avoid DOS and "coop play" issues.
Refs #5903, Refs #4210
Differential Revision: https://code.wildfiregames.com/D3737
This was SVN commit r25156.
