6581796103 removed the ability for terrain to affect movement speed. The
JPS pathfinder cannot support it, and the approach was poor anyways,
coupling rendering data with simulation data.
This lets us remove the dependency on CTerrainTextureManager everywhere.
Tested by: langbart
Differential Revision: https://code.wildfiregames.com/D4459
This was SVN commit r26269.
The main change is the introduction of a 'pushing pressure' counter on
units. This counter increases when units get pushed around, and
decreases over time. In essence, units under high pressure move slower &
are harder to push around.
The major effect is that units can now get bogged down when very dense
groups start colliding. This makes movement more realistic, makes unit
movement more 'chokepointy', and generally improves the mathematical
soundness of the system (lower values are easier to handle for our 200ms
turns).
Other changes:
- The logic to detect units crossing each other's path has been
reworked. Units that run towards each other should not more obviously
avoid each other.
- New parameters: 'Spread' is a measure of how strong the pushing effect
is based on distance. With the current settings, static-pushing is
rather 'on/off', whereas moving-pushing is more gradual (and thus the
max influence distance was increased when moving).
- Default values have been tweaked for lower overlap.
- Units only looked at other units within their grid region. This led to
overlap near grid-borders. Units now look at neighboring grid elements,
which largely removes this issue. While this may be slower, the
performance of pushing was largely negligible before, so it is unlikely
to become a main cause of lag (and overlap was generally disliked by
players).
- Units no longer orient in the direction of pushing, but instead keep
facing their target. This can look slightly odd under very heavy pushing
forces, but vastly improves behaviour of very slow units such as rams
(since they spend much less time turning around). As a side-effect,
clean up angle code following acc780bcbb .
Engine changes:
- Add a debug rendering mode at compile-time to help understand what is
happening.
- Make it possible to constexpr initialise fractional fixed numbers by
using FromFraction
The 'pressure' change was inspired by alre's suggestion at
https://wildfiregames.com/forum/topic/56436-for-a-better-unit-movement/#comment-461987
Refs #6127
Differential Revision: https://code.wildfiregames.com/D4439
This was SVN commit r26245.
Bug introduced in 76acc4e146.
The previous CUnit code had logic to select random aesthetic variants
once initially. The new code removed that, as I completely missed its
purpose, assuming that the random selection, being based on a seed,
would pick the same variants every time. This is incorrect because
entity selections can change the RNG calls, thus the variants, and thus
entity appearance can change when the animation changes (typically, a
horse will change color when walking and running).
The solution is to re-introduce the choice of actor selections on CUnit
creation. This makes sure that units don't change their purely-aesthetic
selections when e.g. animations change.
Reported by: Wowgetoffyourcellphone
Tested By: Stan
Differential Revision: https://code.wildfiregames.com/D4205
This was SVN commit r25844.
I think there is a small mismatch between CheckMovement & the vertex
pathfinder when computing passability because one is ray-based and the
other just uses edges. However, it's out of my reach to fix it for now.
This can lead to units being stuck near building edges occasionally.
This introduces an un-intrusive recovery strategy (aka a hack) in
HandleObstructedMove that should get the units unstuck.
Should fix#6114 (to a sufficient extent anyways)
Differential Revision: https://code.wildfiregames.com/D4162
This was SVN commit r25786.
Following 40cbde1925, the minimum pushing force is 0.2. This also
happens to be the maximum pushing force any pair of units can exert on
each other, so they can freely overlap instead of being pushed.
This tweaks settings slightly to fix that problem.
Reported by: marder
Differential Revision: https://code.wildfiregames.com/D4129
This was SVN commit r25748.
Introduced in 40cbde1925
MoveToFormationOffset may be called after the formation controller is
reset, leading to issues. It seems best to trust only
SetMemberOfFormation.
This causes the speed glitch experienced by wow & Valihrant.
Differential Revision: https://code.wildfiregames.com/D4128
This was SVN commit r25747.
This overall decreases the deathball effect from units walking to each
other a bit.
- Fix formations - this cleans up a UnitMotion hack for formations,
making it possible to increase pushing ranges without breaking closely
knit formations like testudo.
- Make MINIMAL_PUSHING and the MOVE_EXTENSION configurable, and add a
STATIC_EXTENSION as well.
- Increase the pushing range significantly, making units sparser.
Differential Revision: https://code.wildfiregames.com/D4098
This was SVN commit r25708.
Fixes 592453c62f
wasObstructed and wentStraight are not reset when Move() isn't called,
but PostMove may still be called (if the unit was pushed). This will
OOS.
Differential Revision: https://code.wildfiregames.com/D4088
This was SVN commit r25686.
The pathfinder computations are run asynchronously (and potentially on
the main thread) in-between simulation turns, thus reducing
pathfinder-related lag considerably in common cases.
To make this most efficient, the number of paths computed during a turn
via MaxSameTurnMoves is reduced from 64 to 20.
This has a hard dependency on the obstruction manager (via the vertex
pathfinder) not being modified in-between simulation turn (or to put it
more generally on the simulation state not changing outside of turn
computation), otherwise results will be non-deterministic and go OOS.
This is currently entirely safe (as in, it indeed does not happen that
the simulation state changes in-between turn), but future work towards
improving simulation sandboxing would be good.
Thanks to Kuba386 for maintaining & improving the patch in 2020
Thanks to everyone who tested the various iterations of this patch.
Fixes#4324
Differential Revision: https://code.wildfiregames.com/D14
This was SVN commit r25657.
Reduces the 'clumpiness' of units, particularly when ordered to move to
a single point. The minimum pushing force was increased to compensate.
Differential Revision: https://code.wildfiregames.com/D3978
This was SVN commit r25479.
This removes usage of CmptPrivate outside of ScriptInterface.
ScriptRequest can now be used to safely recover the scriptInterface from
a JSContext instead of going through ScriptInterface, which allows more
code cleanup.
Follows 34b1920e7b
Differential Revision: https://code.wildfiregames.com/D3963
This was SVN commit r25442.
Follows 34b1920e7b.
JSON functions and ToString are movec to their own headers.
Also clean out a few PersistentRooted usage to use the 2-phase init to
clean up scriptInterface usage.
With these functions split off, we can finally clean out headers and
remove ScriptInterface.h from most of them, in favour of smaller and
more precise headers.
Take the opportunity to clarify some comments regarding Mutability.
Differential Revision: https://code.wildfiregames.com/D3961
This was SVN commit r25434.
Follows 34b1920e7b.
This splits off the object-related functions, such as
[Set/Get/Has]Property, CreateObject, CreateArray, FreezeObject.
It also puts the definitions in the header itself, which might end up
with faster code here & there, though perhaps slower compilation time
(somewhat doubtful since we already included most things anyways).
Differential Revision: https://code.wildfiregames.com/D3956
This was SVN commit r25430.
All ToJSVal/FromJSVal definitions are put in a separate header.
Remove AssignOr[To/From]JSVal duplication.
The functions were already static so this is rather straightforward.
Follows 34b1920e7b and 2bae30c454
Differential Revision: https://code.wildfiregames.com/D3953
This was SVN commit r25428.
Follows 34b1920e7b.
This separates StructuredClone & DeepCopy logic into its own header,
reducing the size of the monolithic ScriptInterface header.
Differential Revision: https://code.wildfiregames.com/D3922
This was SVN commit r25419.
TERRAIN_TILE_SIZE is now only used in relevant places in the simulation.
This also makes it mostly possible to use CFixed in constexpr contexts.
Refs #5566
Differential Revision: https://code.wildfiregames.com/D3078
This was SVN commit r25360.
Finishes work started in f3aedf88a6.
This removes the boost-CPP function wrappers entirely, in favour of pure
templated code in FunctionWrapper.h
The Call* functions were already heavily templated, so there is nothing
really new here. I just use tag dispatch to reduce the number of
overloads slightly.
The new functions do not need the script interface, only the script
request.
Differential Revision: https://code.wildfiregames.com/D3912
This was SVN commit r25354.
The main benefits are more convenient code in the component interfaces
TU and no limit on the # of arguments that can be passed.
Differential Revision: https://code.wildfiregames.com/D3910
This was SVN commit r25350.
This patch is increasing contrast of player colours used on minimap in
minimap component instead of changing player colours themselves to not
mess with other cases, when they are used.
Differential revision: D3242
Comments by: @vladislavbelov, @ValihrAnt, @Freagarach
This was SVN commit r25312.
Emplace does not replace existing element, insert_or_assign does.
While at it:
- Clean up the 'outdated' logic and reuse it for actors
- When an actor fails to load, return a placeholder. This improves
hotloading of broken actors, and makes Cunit behaviour more predictable.
- Some minor cleanup
Reported by: Stan
Fixes#6157
Differential Revision: https://code.wildfiregames.com/D3882
This was SVN commit r25308.
Essentially reverts D1918 / d592bf9cb6.
Instead of copying path requests to workers, setup the result vector,
then setup an index, and compute 'in-place'.
To send messages, the result vectors are read in order. This makes the
order trivially constant no matter how many workers there are, and the
architecture overall makes it much easier to efficiently paralellise.
Tested by: Langbart, Stan
Differential Revision: https://code.wildfiregames.com/D3849
This was SVN commit r25256.
This changes ParamNode to use UTF8 values internally (XMB files are UTF8
since cb9d0733ef).
This removes the need for a lot of conversions, speeding things up and
allows cleaning up the validator interface & a few other callsites.
ConstructJSVal could be a tad slower because of UTF8->16 conversions
within Spidermonkey; but the difference is unlikely to be noticeable in
practica.
Also:
- Changes `ToXML` to `ToXMLString` for clarity.
- Add a simple "op" test & show a particular behaviour of merge nodes
that I intend to change somewhat in D3830.
- Remove Component.h from simulation2 PCH - brought in too much.
Tested by: langbart
Differential Revision: https://code.wildfiregames.com/D3834
This was SVN commit r25228.
An actor file, as referenced by the VisualActor, can now define
different actors for different "quality level" setting.
In this initial version, the quality is handled directly by the object
manager.
Actor format impact:
- '<qualitylevels>' may be used as the root node, containing actor nodes
as children.
- such actor nodes can refer to a file, or to an inline actor, or
simply be inlined.
- such actor nodes may have a 'quality' attribute, specifying the
maximum quality level of this actor. By default, 255 (the maximum) is
implied.
- The actor format remains valid, but 'groups', 'variants', 'material',
'castshadow' and 'float' can be given a [minquality, maxquality[ range
via XML attributes. Outside of this range, the XML node is ignored
(making it possible to define, in a single actor file, several quality
levels).
Quality is a 0-255 value, with:
- Range 0-99 intended for lower level-of-detail actors (billboards,
etc.)
- Range 100-200 the 'normal' range for models. 100 is "low", 150
"medium", and 200 "high".
- Range 201-255 used for higher quality actors that might be used for
e.g. cinematics.
The range is wide to make it easier to add intermediate levels in the
future and it seemed easier given that an integer value of some kind was
required anyways.
Engine impacts:
- A new CActorDef class is introduced, wrapping an art/actors XML file
and its different quality levels. ObjectBase remains the definition of a
given 'actor', now at a given quality level.
- CActorDef imposes a maximal # of quality level for a particular actor
definition (5 currently).
- CUnit is made to refer to an Actor Definition explicitly, not a
particular ObjectBase.
- As a minor optimisation, variation keys are calculated on
pointer-to-sets-of-selections, instead of raw sets-of-selections, as
this reduces copying.
- some refactoring, including better const-correctness and hotloading
support via std::shared_ptr.
Differential Revision: https://code.wildfiregames.com/D3787
This was SVN commit r25210.
This basically does two things:
- Allow turrets on moving entities (fixes serialisation in cmpPos).
- Allow an entity to be present on another when the other is created.
That makes it basically a boiled down version of a prior patch, omitting
the part where orders could be passed on.
This does allow e.g. ranged units on chariots that fire while the
chariot moves.
Original diff by: @sanderd17
Redone by: @Stan
Differential revision: D1958
Comments by: @Alexandermb, @Angen, @bb, @Langbart, @Nescio, @Stan,
@wraitii
Refs. #2577 by implementing the entity on platform case.
This was SVN commit r25192.
The motion manager introduced in bae258f9a1 makes 'chasing' (e.g. an
entity targeting another entity, which also applies to fleeing)
behaviour symmetrical: both units see the initial state instead of it
being ID-dependent.
This allows removing hacks introduced in 6a66fb8205 (and refined in
7b88b1a0f9).
Differential Revision: https://code.wildfiregames.com/D3785
This was SVN commit r25185.
This implements a form of crowd movement that I've generally called
'unit pushing' in the last few years.
Essentially, any two units will push each other away when they're too
close. This makes it possible to ignore unit-unit obstructions, and thus
makes movement much smoother in crowds.
This first iteration of this system only allows pushing between idle
units and between moving units (i.e. a moving unit does not affect an
idle one).
This is because the unitMotion logic to detect it is stuck & needs to
use the pathfinders starts breaking: units can fail to move because they
are pushed away from their intended movement, and the current logic
fails to handle this gracefully.
Thankfully, the most value of this patch in terms of player experience
is found in the improvements to group movements and shuttling.
Other impacts:
- As the short pathfinder is called less often, we can increase the
starting search range & reduce the # of max turns, both improving
collision recovery.
- The performance of idle units is slightly worsened, as they must be
checked for idle-idle collisions. If needed a 'sleeping' system, as used
in physics engine, could be implemented.
- In general, however, expect slight performance improvements, as fewer
short paths are computed.
- Gathering efficiency should increase slightly, since shuttling times
are likely reduced slightly.
- As a sanity change to improve some edge cases (units that say they're
moving, i.e. pushable, but don't actually move), the 'going straight'
logic is turned off if a short path has been computed. This requires a
few cascading changes to work correctly.
Technical notes:
- To reduce the cost of the n^2 comparisons that pushing requires, units
are only compared within a small square on a grid which is lazily
reconstructed each turn. The overhead seems rather small, and this is
much simpler than keeping an up-to-date grid.
- The design is intended to be parallelisable if needed someday.
- The pathfinder's CheckMovement ignores moving units in UnitMotion, as
that is now the spec. Idle units are not ignored, which is required for
the 'collision' detection to work correctly (see above).
Refs #3442 (not fixed - idle units are not pushed by moving units).
Fixes#5084 (the overlap can still happen, but units will push each
other away).
Differential Revision: https://code.wildfiregames.com/D1490
This was SVN commit r25182.
d8ea401a95 replaced the ExploreTerritories logic, but I did not account
for the territory grid being N cells wide when the LOS is N+1.
Therefore, we could get out of bounds.
Reported by: Vladislavbelov
Differential Revision: https://code.wildfiregames.com/D3765
This was SVN commit r25161.
9d82ae15af introduced logic to extend the search range of the short
pathfinder in some situations. This extension was unbounded, resulting
occasionally in search domains several hundred meters wide, and path
computation that can take several seconds.
Reported by: Vico (on the forums).
Differential Revision: https://code.wildfiregames.com/D3760
This was SVN commit r25150.
Following bae258f9a1, all units moved, then all messages were sent. This
could result in units overlapping, which cannot be resolved without unit
pushing. Fixing this makes for a fairer comparison with the pushing
diff, so it seems worthwhile.
Differential Revision: https://code.wildfiregames.com/D3746
This was SVN commit r25126.
bae258f9a1 implemented CCmpUnitMotionManager, which handles motion for
CCmpUnitMotion (as distinct from ICmpUnitMotion, the interface).
The tight coupling between these two components was awkward at the
interface level, leaking underlying implementation details.
This diff makes CmpUnitMotionManager explicitly manage CmpUnitMotion,
instead of any implementation of ICmpUnitMotion, and moves files around
as requir
ed.
This:
- Makes it impossible to accidentally try to have the wrong
IID_UnitMotion managed by the UnitMotionManager.
- Allows devirtualising the calls from the manager to UnitMotion itself
(and inlining, as they are compiled in the same TU).
- Cleans up the manager interface - MotionState is now part of
CCmpUnitMotionManager.
- Cleans up ICmpUnitMotion interface - no need to provide a private
interface for the manager.
Differential Revision: https://code.wildfiregames.com/D3732
This was SVN commit r25125.
This is the same commit as 4bb31f084e, reverted in 5d1899785a. Noted
issues were fixed.
Partial revert/fix of 2f19cf86d3 and 2567fee329.
Before this diff, it was possible for a mod containing a cache/ or a
config/ folder to get written to incorrectly.
The issue is VFS can map multiple directories to one 'virtual' path, for
reading mods. However, writing data is problematic: which path to
choose?
The only viable solution is to use a path relative to the highest
priority directory encountered in the VFS path, or write paths could be
'hijacked' by lower-priority mods.
This fixes these issues by:
- Adding a new lookup mode ('Real-path') that explicitly picks the real
path relative to the highest-priority subdirectory in the VFS Path.
- Preventing overwriting a real directory with a lower priority one in
general.
- Revert c0c8132dd4's GetRealPath change, re-introducing the function as
GetOriginalPath.
This also cleans up some duplication that led to empty mod folders in
the user mod path, and cleans up loading the 'user' mod.
It also makes it explicit that a directory must be passed to Mount().
Note that the new 'realpath' lookup can still be somewhat complex with
many mount points at various hierarchy levels, but it is at least
predictable/deterministic without having to be careful about populating
order.
Fixes#2553
Differential Revision: https://code.wildfiregames.com/D3728
This was SVN commit r25107.
Partial revert/fix of 2f19cf86d3 and 2567fee329.
Before this diff, it was possible for a mod containing a cache/ or a
config/ folder to get written to incorrectly.
The issue is VFS can map multiple directories to one 'virtual' path, for
reading mods. However, writing data is problematic: which path to
choose?
The only viable solution is to use a path relative to the highest
priority directory encountered in the VFS path, or write paths could be
'hijacked' by lower-priority mods.
This fixes these issues by:
- Adding a new lookup mode ('Real-path') that explicitly picks the real
path relative to the highest-priority subdirectory in the VFS Path.
- Preventing overwriting a real directory with a lower priority one in
general.
- Revert c0c8132dd4's GetRealPath change, re-introducing the function as
GetOriginalPath.
This also cleans up some duplication that led to empty mod folders in
the user mod path, and cleans up loading the 'user' mod.
Note that the new 'realpath' lookup can still be somewhat complex with
many mount points at various hierarchy levels, but it is at least
predictable/deterministic without having to be careful about populating
order.
Fixes#2553
Differential Revision: https://code.wildfiregames.com/D3217
This was SVN commit r25104.
Fixes bae258f9a1.
As reported by Freagarach, garrisoned units trigger error messages.
As reported by Vladislavbelov, noPCH was broken & there were some style
issues.
Differential Revision: https://code.wildfiregames.com/D3707
This was SVN commit r25078.
This new MotionManager handles movement for UnitMotion components (not
UnitMotionFlying).
This is a first step towards unit pushing, by giving a central place for
the relevant units to collide.
One important side-effect is that movement is effectively synchronous -
the positions are not actually updated until all units have moved for a
turn (refs 6a66fb8205).
As a side-effect, it's an optimisation: fewer messages are being sent
overall, which leads to a slight speedup (negligible without a lot of
units though).
This is a first step - ideally, the movement functions called from
UnitMotionManager would actually be moved there.
Differential Revision: https://code.wildfiregames.com/D3509
This was SVN commit r25071.
Fixes a1dc9cadd8: if the speed doesn't change, UnitMotion doesn't update
the visual actor. Unfortunately, if another component has in the
meantime reset the animation to 'Idle', the unit will now move while
Idle. This can happen when leaving formation to do something else,
though it'srare.
This fixes that by instead always calling VisualActor, which does its
own checking to avoid redundancy. It's a bit less efficient, but not too
much.
Note that this relies on UnitMotion::UpdateMovementState being called
after any UnitAI code that could reset the animation to IDLE.
Differential Revision: https://code.wildfiregames.com/D3619
This was SVN commit r25011.
- Replace ScriptInterface::RegisterFunction with
ScriptFunction::Register
- Mostly removing unused cmpPrivate*
- Some usage introduces specific getters (mapgenerator, AIWorker,
XmppClient,...)
- Several passthrough functions are simply removed in favour of calling
the original, reducing duplication
- Make use of ScriptRequest/ScriptInterface capabilities where
relevant.
- Make JSI_* headers only expose necessary functions, lightening them
considerably and reducing duplication
- Reuse namespaces in JSI_* implementations directly, reducing visual
noise there
Follows f3aedf88a6
Differential Revision: https://code.wildfiregames.com/D3626
This was SVN commit r24983.
Introduce a LOS_TILE_SIZE, to replace usage of TERRITORY_TILE_SIZE in
the LOS code.
This makes it possible to change the resolution of LOS/Terrain without
affecting the other component.
Additional refactoring:
- LosTile has been renamed LosRegion (it's more comparable to the
hierarchical pathfinder regions/spatial subdivisions)
- LosState explicitly refers to "los vertices" instead of terrain
vertices.
Refs #5566
Differential Revision: https://code.wildfiregames.com/D3076
This was SVN commit r24980.
The new methods:
- aren't included in ScriptInterface.h directly, lightening that header
- don't use boost CPP
- don't need argument types or number or constness to be specified
- can work with object methods somewhat transparently
- support optional cmptPrivate (allowing removal of many UNUSED macro)
- support optional const ScriptRequest&, which is safer.
This first diff changes only some of the JSI files & the component
manager. Further diffs will update other files and finally delete the
current code.
Differential Revision: https://code.wildfiregames.com/D2818
This was SVN commit r24969.
The spawn code should not assume that obstructions will never be
0-sized.
Reported by: Zack
Fixes#6039
Differential Revision: https://code.wildfiregames.com/D3583
This was SVN commit r24945.
Obstructions can reactivate after being destroyed, which leaves them
dangling forever. This is similar to 54f7a09a54.
This fixes this issue by setting a temporary "is destroyed" variable to
true.@
Reported by: seeh
Tested by: langbart
Reviewed By: Freagarach
Fixes#6016
Differential Revision: https://code.wildfiregames.com/D3558
This was SVN commit r24894.
5d96346ac5 proved unsufficient to fix formation 'waltzing'. This is a
better fix, which makes sure units actually try to reach their
designated offset in the first place.
Further, it removes code that recalculated offsets un-necessarily, which
led to an issue with "sloppy" formations such as open and closed orders.
Fixes#5997
Differential Revision: https://code.wildfiregames.com/D3543
This was SVN commit r24865.
Following 847f3a9995,
Units in formation can get very small movement offsets, that nonetheless
require large rotations, and thus at least 2 turns to accomplish.
However, following 847f3a9995, PossiblyAtDestination fires() only after
the first rotation, so the unit ends up 'waltzing' in place.
Before that diff, the unit never even moved since PossiblyAtDestination
fired straight away.
This is also noticeable since IDLE formation re-order their members
since 71a61d5f50.
The fix here is to ignore rotation time for very small offsets, which
lets units accomplish the movement in one turn and fixes the issue.
Reported by: wowgetoffyourcellphone
Reviewed By: Freagarach
Tested By: langbart
Differential Revision: https://code.wildfiregames.com/D3518
This was SVN commit r24831.
D3230 / 847f3a9995 introduced range checking at turn start, and removed
a hack that made units predict the position of their target too far
ahead. This worked fine when in "straight movement" mode, unfortunately
I failed to recognise that ranged units would never use that mode. This
meant that ranged-unit chasing was broken.
There is a straightforward fix however, since we can simply change
TryGoingStraightToTarget to be used by ranged units. It fixes the issue
efficiently and improves movement for ranged units in general, so it
probably should have been done from the start.
Refs #5936
Differential Revision: https://code.wildfiregames.com/D3489
This was SVN commit r24803.
- Because units slow down when turning, and JPS paths often begin with a
J-shape, chasers can fail to catch up to slower chasee, because the
latter don't recompute paths as often. To fix this, ignore the first
waypoint if it's close by and the next is accessible.
- Don't interpolate the target position when interpolation isn't
necessary (i.e. when not processing the MT_Update_Motion* message), as
that resulted in the "follow known bad path" hack to active
un-necessarily.
- Tweak PathingUpdateNeeded, it will return true when it has no path to
follow
- Remove the direct-range consideration in the "distance uncertainty"
calculation.
Refs #5936
Differential Revision: https://code.wildfiregames.com/D3485
This was SVN commit r24800.
Units movement is currently "all or nothing". This means that a chasing
entity that moves fast enough is likely to collide with its target, if
the latter is moving also. This means that it might fail to get in range
if the max range is smaller than the movement speed over a turn.
This happens to be very much the case in MP, as cavalry range is 4,
melee cav speed is ~20 and turns are 500ms.
This problem depends on which unit moves first (i.e. which unit is
lowest-ID).
To fix this, ignore the obstruction of the target, if it is moving, when
moving. This however means sometimes chasers will 'overshoot' and block
their target pathing, making the chase easier than it probably should
be.
Fleeing units don't suffer from this problem since they also ignore
their target (and their code handles it).
This new problem introduced in this diff is heavily dependent on the
exact speeds and ranges at play, and a further diff will improve the
situation to acceptable levels.
Reported by: FeldFeld
Refs #5936
Differential Revision: https://code.wildfiregames.com/D3482
This was SVN commit r24798.
Unit Motion currently checks if the unit is at destination during the
MT_Update_Motion* step, which happens late in the turn (notably, after
Timer.js) and moreover happens while entities are being moved (e.g.
entities with lower IDs have moved already, entities with higher IDs
have yet to do so).
This changes UnitMotion to instead check at turn start, which:
- benefits from in-turn path computations for more fluid movement
- ensure that distance checks aren't done against an entity that has
already moved for the turn.
The latter issue led to units failing to get in range of their target
when chasing them, in some situations.
As a side effect, this means that UnitAI move requests always take one
turn to succeed, so orders should be updated to check for range (or
they'll waste a turn). This is done for garrisoning, other orders were
already doing so.
Also includes a small tweak to avoid units rotating randomly when they
have no movement to accomplish.
Patch by: bb
Reviewed By: wraitii
Refs #5936
Differential Revision: https://code.wildfiregames.com/D3230
This was SVN commit r24797.
f2b3c4d8ec broke deserializing because it did not reset the mapsize on
Deserialize(), and thus the water renderer would not regenerate data.
Differential Revision: https://code.wildfiregames.com/D3461
This was SVN commit r24778.
Units sometimes ignored targets that entered their LoS. The cause is
d0fc8ff67d: range queries returned units farther away, and those units
might actually be out of range if distance is computed center-to-center,
which both UnitAI and LOS do. This meant that code relying on range
query updates was possibly broken, and indeed units missed things (see
ticket).
This introduces a boolean to switch between pre-d0fc8ff67d behaviour
(entity-as-point, center-to-center range queries) and post-d0fc8ff67d
(entities-as-circumscribing-circle, edge-to-edge range queries).
The former is used for UnitAI (where the new behaviour bugged), auras
(where varying structure sizes made it awkward) and build
restrictions(which simply did not really need it).
Reverts 7f1ee23d88, 050c5401b1 (with the exception of the iber monument
footprint), and the template changes in d0fc8ff67d itself.
It also reduces alertRaiser ranges slightly, this was missed in the
original diff.
#3381 is not reopened as BuildingAI still uses the new range queries.
Reported by: Freagarach
Comments By: Angen
Fixes#5968
Differential Revision: https://code.wildfiregames.com/D3456
This was SVN commit r24776.
The Y coordinate at which to fire a projectile is currently assumed to
be the target's current Y, which is incorrect if the target is moving on
a slope.
This fixes that.
Note that this was purely visual, since projectiles still hit the target
regardless, as the height component is totally ignored, even if the
projectile is underground (in fact, the projectile's position is not
known in DelayedDamage::MissileHit, which just assumes it lands where it
said it would when fired).
As noted by bb in f737831167Fixes#5939
Differential Revision: https://code.wildfiregames.com/D3425
This was SVN commit r24766.
This fixes a rare crash at map generation.
The water renderer could be left in an invalid state when exiting a
game, and would then crash on the next map generation in some cases.
Tested by: Stan
Differential Revision: https://code.wildfiregames.com/D3447
This was SVN commit r24759.
This fixes chasing, particularly chasing ranged cavalry.
- Standardise the range of melee cav to 4.
- Decreases the speed of ranged cavalry slightly to make melee cavalry a
better counter & reduce the ability of ranged cavalry to dominate an
area.
- Fix UnitMotion to better chase units, by increasing direct-range
distance and making "from scratch" short paths recompute better paths
(by increasing the search range).
- Gives some free rotation time for slight angles to units. Angles below
30° take no time to rotate towards. Chasing units that recomputed a lot
of paths could be slowed down substantially by minute angle differences.
Fixes#5936
Differential Revision: https://code.wildfiregames.com/D3402
This was SVN commit r24708.
Attack.js can use UnitMotion to calculate the position of the unit in
the future, accounting for odd movements such
as zigzags, turnarouds and early stops (to the extent of the current
order).
This improves the resilience of units against the 'dancing' trick.
The linear interpolation is kept as a failsafe and to avoid an edge case
in the new prediction code.
Patch by: bb
Refs #5106
Differential Revision: https://code.wildfiregames.com/D3225
This was SVN commit r24701.
Large units risk being stuck between other units. This is true in
general, but particularly weird with formations, since individual units
may well not be stuck, only the invisible formation controller.
This alleviates the issue by ordering units to move individually when
the controller appears stuck.
It introduces a new "VERY_OBSTRUCTED" unit motion message, which
triggers when a unit has failed to move for several turns.
Reported By: Angen
Reviewed By: Freagarach
Fixes#4935
Differential Revision: https://code.wildfiregames.com/D3209
This was SVN commit r24511.
Generalize component/AI serialization system to any user-defined JS
object. This includes Vector2D/3D, fixing an old issue.
As with components/AI, JS Objects may implement a Serialize/Deserialize
function to store custom data instead of the default, which attemps to
serialize all enumerable properties.
Fixes#4698
Differential Revision: https://code.wildfiregames.com/D2746
This was SVN commit r24462.
Following D3221/38c3827d3b, units switch to the 'run' animation when
moving faster than their walkspeed.
This makes formations 'flickery' because units often move slightly
faster than their walkspeed when the formation rotate slightly, which
happens often. It looks fairly bad.
This switches to the running animation halfway through, though a more
general system would be more desirable.
Approved By: Angen
Reviewed By: bb
Differential Revision: https://code.wildfiregames.com/D3224
This was SVN commit r24456.
Component.h is loaded by convention in all CmpComponents and is
requireed to use CmpPtr.
Fixes#5898
Differential Revision: https://code.wildfiregames.com/D3259
This was SVN commit r24454.
This improves behaviour when units need to go around a concave obstacle.
They would tend to clump inside the 'dead-end' before realising they
needed to go around. This was rather easy to trigger on Acropolis. See
included Unit Motion Integration Test.
The cause is the logic that removed the next long waypoint when
obstructed. While that behaviour is desirable, removing too many
waypoints means the unit tries to short-path, using a small domain
range, to a goal that's impassable, meaning they go as close as they can
in Euclidian distance, i.e. towards the dead end.
This changes that behaviour by only deleting waypoints within a certain
distance from the entity, scaling with search-space range. It's tricky
to find a good compromise between performance and behaviour here, but
the values I've picked seem OK.
However, the fact that the entity would ultimately remove all waypoints
and thus trigger a full path recomputation was actually a feature,
inherited from D2754 / 892f97743b. This diff therefore handles that
explicitly, doing so on a more regular basis to behave better overall.
As a further cleanup, "m_FailedPathComputations" is incremented in
HandleObstructedMove, as it is quite possible to never increment it in
PathResult despite not getting actionnable paths. This thus renames it
to m_FailedMovements, and uses the opportunity to clean up PathResult(),
by only having one path for both short and long-range paths. Further,
PathResult now does not immediately request new paths, leaving that to
Move(), to avoid requesting transient paths that aren't actionnable.
This also makes it possible to revert 9e41ff39fc. It requires increasing
the MAX_FAILED variable, or more units get stuck as they reach the max
more often.
The search-space expansion is slightly slowed, and with a little more
delay, as a performance optimisation. From testing, this doesn't impact
real movement much as units short paths tend to be invalidated by the
next turn, as other units move, anyways.
Clarify comment around the vertex-pathfinder search-space bounds hack,
and ensure it isn't used for the very worst cases of units being stuck,
as it could be a pessimisation then.
Finally, this explicits a 2011 hack where if the long-pathfinder fails
to return a valid path the goal's center is used directly. This happens
when the goal is unreachable to the long-pathfinder, which may be
because it is actually unreachable or because only the short-pathfinder
can reach it. In those situations, the hack allows a last-ditch attempt
at reaching it before failing to move entirely. Performance wise, this
is faster overall for actually unreachable goals, since it skips all the
intermediate steps. For reachable goals, it might be occasionally
slower, but that case is quite rare (certainly rarer than unreachable
goals).
Reported By: Angen
Fixes#5795
Differential Revision: https://code.wildfiregames.com/D3203
This was SVN commit r24429.
By using templates appripriately we can remove the need for explicit
specification of serializers, making it easier to serialize container
types and to write new serialization helpers.
Direct serialization calls haven't been replaced in this diff.
Comments by: vladislavbelov
Differential Revision: https://code.wildfiregames.com/D3207
This was SVN commit r24427.
Fixes eb7940b418.
As reported by Vladislav, there is possibly confusion on what exactly is
being ignored when there are multiple statements after DISCARD. Explicit
wrapping avoids that.
Differential Revision: https://code.wildfiregames.com/D3206
This was SVN commit r24397.
Units can get stuck on passable navcells surrounded by impassable
navcells because the short-pathfinder got them there, and then ordering
them to move far way uses the long-pathfinder.
We can safely run a short-pathfinder call, using the same logic as in
D1424, to get unstuck in at least some of those situations.
Reported by: Angen
Differential Revision: https://code.wildfiregames.com/D3215
This was SVN commit r24385.
Allow boolean modifications JavaScript
Allow territory influence weight, and root, to be changed via tech.
Differential Revision: https://code.wildfiregames.com/D3069
This was SVN commit r24373.
GUIObjectBase is made a IGUIObject* to avoid including those headers
un-necessarily. Subsequent diffs ought to clean up the various of
pointers for that with a similar type with reference semantics.
Also:
- Add standard C and C++ headers (mostly cstring for memcpy, string and
vector) where needed.
- Swap out some includes for forward declarations
- Clean up un-necessary boost includes in precompiled and other headers.
- Clean up precompiled headers, including fewer things.
- Move ACPI to the windows-specific folder as it's included there only
and mostly specific to that platform.
Thanks Stan for the testing.
Differential Revision: https://code.wildfiregames.com/D3129
This was SVN commit r24352.
This ugprades 0 A.D. to the latest ESR at the moment of writing.
Mostly straighforward API changes (see meta-Bug 1633145)
- js::Class is merged with JSClass
- JSNewArrayObject becomes JS::NewArrayObject
- ArrayObject-functions are moved to a new public header Array.h
- JSMSG error messages have again been changed, requiring some tweaks.
- AutoValueArray becomes RootedBalueArray (Bug 1634435)
- 'uneval' is behind a Realm flag (Bug 1565170), but no removal is
planned in the short-term future.
- Some minor GC API changes (Bugs 1569564 and 1633405)
- Error reporting has had some tweaks, and error flags have been removed
(Bug 1620583)
- StructuredClone are now always thread-safe, simplifying an API change
introduced in SM52 (Bug 1607791)
Tested by: Stan, Freagarach, mammadori
Closes#5861
Differential Revision: https://code.wildfiregames.com/D3168
This was SVN commit r24333.
Original diff D2512
Reported on forum by gameboy:
https://wildfiregames.com/forum/index.php?/topic/27384-strange-landing-on-the-island-and-unable-to-attack/
Units with goal where minrange = maxrange rarely arrive to destination,
because they miss it.
See Todo in unitmotion
Relative part:
In the meantime, one should avoid that 'Speed over a turn' > MaxRange -
MinRange, in case where min-range is not 0 and max-range is not
infinity.
For that reason avoid passing minrange = maxrange from ai.
Also warn in cpp unitmoition when getting this kind of command.
Differential revision: D3149
Reviewed by: @wraitii
This was SVN commit r24315.
No noteworthy API changes.
Details:
- Remove UTF16 script execution since UTF8 is supported in SM68 and
going forward
- Several new headers includes are required
- Realms replace Compartments as "global holders" (see meta-Bug 1357862)
- JSRequests are removed entirely (Bug 722345), see also aae417bd29
- Trivial API updates in ProxyHandlers, ArrayBuffer, Warnings, GC
reasons, Context options, ObjectIsFunction, ValueVectors and
JSCompartment
See also the migration guide:
https://github.com/mozilla-spidermonkey/spidermonkey-embedding-examples/blob/esr78/docs/Migration%20Guide.md
Tested by: Freagarach, Stan, Subitaneo
Fixes#5860
Differential Revision: https://code.wildfiregames.com/D3144
This was SVN commit r24297.
Correctly recompute the actor when something changes that could modify
it (ownership change, ...).
Make sure mirages are updated when they reappear after being hidden.
Make sure foundations have proper identity classes.
Make sure mirages don't respond to value modifications in the visual
component.
Clarify a few comments.
Earlier work by: Sandarac
Fixes#2907
Differential Revision: https://code.wildfiregames.com/D576
This was SVN commit r24279.
Fix in b1a78ce285 actually worked by accident, and introduced more
serious issue with minimal range.
Differential revision: D3148
Fixes: #5864
Reviewed by: wraitii
This was SVN commit r24264.
Introduce a DISCARD macro to ignore the warn_unused_result attribute
used by Spidermonkey, and reuse it elsewhere.
Differential Revision: https://code.wildfiregames.com/D3147
This was SVN commit r24261.
Follows from d0fc8ff67d, 95dbb8be25.
The original diff asserted that only "real" entities would make range
queries. This proved inaccurate as building previews can too. However,
simply removing the assertion doesn't fix the issue, given that they
still aren't found and we still need to account for their size.
This fixes that properly by special-casing local entities.
Thanks s0600204 for giving this a look.
Reported by: Mr.lie
Differential Revision: https://code.wildfiregames.com/D3132
This was SVN commit r24231.
This cleans up many un-necessary header includes, either simply
providing nothing or forward declarations in their place.
No major compilation time change here, though this does reduce depencies
in some headers.
Also fix up old MacOS STL-include fixes that are no longer relevant.
Differential Revision: https://code.wildfiregames.com/D3128
This was SVN commit r24227.
I incorrectly assumed no local entities would be making range queries,
but some building previews do. The assert is thus incorrect.
Reported by: SubitaNeo
Fixes#5870
Differential Revision: https://code.wildfiregames.com/D3125
This was SVN commit r24223.
CCmpRangeManager queries do not take obstruction size into account,
meaning they return fewer entities than they should. This particularly
affects buildings with ranged attacks, gates, and a few other templates.
This is, unfortunately, a slight performance decrease.
Discovered following Angen's comment [[
https://code.wildfiregames.com/D2738#116269 | here ]].
Comments by: Angen
Reviewed By: bb
Refs #3381 (not marking it down as 'fixes' and I'm not entirely sure it
was the only moving part here).
Differential Revision: https://code.wildfiregames.com/D2759
This was SVN commit r24217.
No particularly noteworthy changes, as most complex API changes were
already supported in SM45 and done.
The addition of JSStructuredCloneData allows to remove our custom class.
Changes:
- InformalValueTypeName is back in the API, so remove our
implementation.
- Stop using JSRuntime entirely in favour of JSContext*
- JSPropertyDescriptor is renamed.
- CompartmentOptions are tweaked slightly (no functional changes)
- JS::Construct - API update.
- JSClass split - API update.
- A js.msg error message was removed, so we had to use a different one.
- Tests fix: fix comparison of union instances
- Disable warning in spidermonkey Vector.h
- Update error reporting to SM52 (minor API updates)
- Ignore warnings about unused return values (would come from OOM, which
isn't recoverable)
Most of the patching was done by Itms.
Tested by: Stan, Freagarach
Fixes#4893
Differential Revision: https://code.wildfiregames.com/D3095
This was SVN commit r24203.
Broken in several recent diffs.
This also fixes (very) old missing standard headers.
Differential Revision: https://code.wildfiregames.com/D3110
This was SVN commit r24200.
Includes alarm_defeated_ally.ogg by @Samulis
Reviewed by: @bb
Comments by: @Angen Freagarach
Differential Revision: https://code.wildfiregames.com/D2860
This was SVN commit r24199.
- Check for pending exceptions after function calls and script
executions.
- Call LOGERROR instead of JS_ReportError when there is a conversion
error in FromJSVal, since that can only be called from C++ (where JS
errors don't really make sense). Instead, C++ callers of FromJSVal
should handle the failure and, themselves, either report an error or
simply do something else.
- Wrap JS_ReportError since that makes updating it later easier.
This isn't a systematical fix since ToJSVal also ought return a boolean
for failures, and we probably should trigger errors instead of warnings
on 'implicit' conversions, rather a preparation diff.
Part of the SM52 migration, stage: SM45 compatible (actually SM52
incompatible, too).
Based on a patch by: Itms
Comments by: Vladislavbelov, Stan`
Refs #742, #4893
Differential Revision: https://code.wildfiregames.com/D3093
This was SVN commit r24187.
aae417bd29 made ScriptInterface not recreate a new JSContext since it
becomes a compartment wrapper, but that means we need to GC tests or
they might OOM.
To make it mostly seamless, GC on any test setup. The JS tests are
pretty close to the 16Mb limit as it stands so GC them manually too, for
good measure.
Refs #4893
Differential Revision: https://code.wildfiregames.com/D3101
This was SVN commit r24182.
SM52 essentially replaces JSRuntime with JSContext (though JSContext
itself was replaced with JSCompartment).
To prepare for this migration, rename all Runtime-related things to
Context.
Part of the SM52 migration, stage: SM45 compatible.
Patch by: Itms
Refs #4893
Differential Revision: https://code.wildfiregames.com/D3091
This was SVN commit r24181.
ScriptInterface is now a wrapper around a JSCompartment, and thus always
has a well-defined global.
The error reporter is moved to ScriptRuntime in anticipation of that
handling JSContext in a later diff.
Part of the SM52 migration, stage: SM45 compatible.
Patch by: Itms
Tested By: Freagarach
Refs #4893
Differential Revision: https://code.wildfiregames.com/D3090
This was SVN commit r24180.
As part of the SM45->52 migration, a ScriptInterface becomes a wrapper
around a JSCompartment, not a JSContext, thus we ought to store private
data for the compartment and not the context.
This is a mass rename of CxPrivate to CmptPrivate to match that before
the actual changes.
Part of the SM52 migration, stage: SM45 compatible
Patch by: Itms
Tested By: Freagarach
Refs #4893
Differential Revision: https://code.wildfiregames.com/D3089
This was SVN commit r24177.
JSAutoRequest is required before calling into most JSAPI methods, for GC
reasons.
Calling it is required and fragile as one must not forget.
Further, SM52 and later make manipulating JSContext* dangerous as that
can cross Compartment(Realm in SM68) barriers (and ScriptInterface now
matches a Compartment).
The solution to both problems is to avoid using JSContext* in 0 A.D.
itself. To achieve this, a Request class is introduced, and must be used
to access a JSContext* from a scriptInterface. Further, Request is
passed to other ScriptInterface functions isntead of JSContext*, making
it obvious that the caller has already called it, reducing errors and
redundant JSAutoRequest calls.
Only JSNative functions now get a naked JSContext* without protection,
but the likelihood of forgetting a request is lower since many
ScriptInterface functions now expect it.
JSContext* is directly passed to JSAPI functions only.
Part of the SM52 migration, stage: SM45 compatible
Based on a patch by: Itms
Tested By: Freagarach
Refs #4893
Differential Revision: https://code.wildfiregames.com/D3088
This was SVN commit r24176.
When serialising JS objects, we keep track of any encountered object,
and serialize it only once. Any further serialisation instead stores an
ID referring to the original object (essentially an opaque pointer).
The trouble of course is to have a unique, persistent identifier for
such an object.
svn uses an ObjectIDCache, essentially a "JS Object -> ID" map (which
internally is essentially a "JS heap pointer -> ID" map).
JS, since ES15, includes a "Symbol" primitive type, which is a unique,
immutable identifier. They are also not iterable by for..in or
GetOwnPropertyName or related.
This means they can be used to store the tag directly on the object
(since it's impossible overwrite a user property).
Thanks to this, we can forgo ObjectIDCache in the serializers, and since
following D2897 it becomes unused, we can delete it, along with the
Finalization code it used.
Part of SM52 migration, stage: SM45-compatible changes.
Patch by: Itms
Tested By: Freagarach
Refs #4893
Differential Revision: https://code.wildfiregames.com/D3085
This was SVN commit r24167.
Follow up on 8bfb449375. Allows saving turret positions in the map file,
instead of relying on the order in which the entities are added.
Differential Revision: D2614
Reviewed by: @wraitii
Comments by: @Angen, @bb, @vladislavbelov.
This was SVN commit r24161.
The script interface has code to serialize/deserialize JS objects with a
user-defined prototype. That code is usable in the AI, but currently
unused (and there are no plans to use it in the long run).
Removing it allows removing more code down the line, which helps with
the SM45-52 migration.
Collaboration with itms.
Refs #4893
Differential Revision: https://code.wildfiregames.com/D2897
This was SVN commit r24157.
ComputeTargetPosition called Dot() with large enough vectors that it
overflowed. Avoid that by not actually doing the full dot product.
Reported by: Itms
Fixes#5852
Differential Revision: https://code.wildfiregames.com/D3061
This was SVN commit r24152.
Following d592bf9cb6, paths requested at turn N were set-up to be
computed between the end of turn N and the start of turn N+1 (which
would ultimately allow threading this computation), via calls to
'StartProcessingMoves' and 'FetchAsyncResultsAndSendMessages'.
However, the call to UpdateGrid() remained at the start of turn N+1,
between the 'start' and 'fetch' calls. Since all paths are currently
computed on the 'start' call, this means all paths are computed on a
(possibly) dirty pathfinder grid.
In particular, this leads to OOS on rejoin since the rejoiner will
recompute the grid before computing the outstanding paths.
This would also obviously be buggy in a threaded environment, since some
paths might be computed on the fresh and some on the dirty grid.
Finally, MT_TurnStart was sent before the paths were computed, which
might lead to further pathfinder grid changes (not a crashing problem
without threading, but still conceptually odd). The 'fetch' call is thus
moved before it.
This thus fixes d592bf9cb6/D1918, after 92ad6a61fa already fixed a first
issue.
Since the grid is now only updated at the end of a turn, we need to
ensure that it is correct on Turn 0, thus the pathfinder recomputes it
on InitGame.
Refs D14
Reported by: Itms
Fixes#5851
Differential Revision: https://code.wildfiregames.com/D3064
This was SVN commit r24142.
939002f0dc changed from vectors to grid which broke resetting when
terrain size changed.
Also use SAFE_ARRAY_DELETE for simplicity.
Reported by: vladislavbelov
Reviewed By: vladislavbelov
Differential Revision: https://code.wildfiregames.com/D2961
This was SVN commit r24117.
Introduced in 5fbb224dc0
rewrite 3 ifs to 1 if
merge 2 member variables into 1 member variable
remove 2 function local variables
save one call for CComponentManager as both ifs would or execute or not
code is shorter and looks nicer
Differential Revision: D3009
Reviewed by: bb
This was SVN commit r24072.
Summary:
As reported by @bb and @Angen , 375c319639 broke formation walking in a
few situations.
The issue is that f489ab3a16/D2871 requires formation members to get no
messages until the controller is stopped, but 375c319639 didn't use the
correct function (on account of a missed rebase), so members stopped too
early.
Reported by: bb, Angen
Reviewed By: bb
Differential Revision: https://code.wildfiregames.com/D3006
This was SVN commit r24029.
Splash falloff was calculated using centre-to-point distance, where
nearest-edge to nearest-edge ought to have been used.
Use DistanceToPoint to correct for that.
Make sure the damage multiplier cannot go negative.
Remove GetUnitSize in favour of GetSize.
Reviewed By: bb
Differential Revision: https://code.wildfiregames.com/D2963
This was SVN commit r24010.
As reported by Freagarach following a7da40ac2f.
32e8ed51aa introduced a "MoveObstructed" message, that could be sent
when the entity ran into obstructions, to stop early.
In HandleObstructedMove, my intention, as written in the comment, was
that the caller would do its thing (call StopMoving(), move out of the
world etc.) and thus ComputeGoal would return early.
However, I mistakenly left the `cmpPosition->GetPosition2D()` in between
that and ComputeGoal, which would then fail.
This fixes that by moving it after the `ComputeGoal` call.
Also add a sanity StopMoving() call to a7da40ac2f's move-out-of-world
call.
Reported by: Freagarach
Differential Revision: https://code.wildfiregames.com/D2935
This was SVN commit r23940.
Improve unitAI: don't move if the requester can reach us and we are
close enough. This avoids an issue where ships moved more than necessary
when picking up many units.
Also improve requester UnitAI -> retry pickup if the target entity is
Idle.
Improve unitMotion: periodically recompute paths in "known bad path"
mode to adapt to moving targets.
Expose UnitMotion reachability to scripts and other code.
This adds a test map for some common and some tricky pickup cases, using
triggers.
Based on a patch by: causative
Reviewed By: Freagarach
Fixes#3472
Differential Revision: https://code.wildfiregames.com/D665
This was SVN commit r23925.
Removing strict binding of selection to footprint by adding optional
choice similar in footprint. If present, that one will be used, else it
will fallback to footprint size.
Allowing to use any selection shape without affecting gameplay, because
foorprint is used for projectile hit detection.
Differential revision: https://code.wildfiregames.com/D2844
Reviewed by: wraitii
This was SVN commit r23900.
Units in formation can occasionally request many short paths (and thus
introduce crippling lag) if their offset is obstructed.
This particularly happen when the formation is idle, since the offset
then always remains obstructed.
To prevent this, it is OK to immediately stop pathing on any motion
message (obstructed, failure, success). This does not break formation
movement since messages are only sent when the formation controller is
not moving (this finishes what was started in 0535eb9b92).
Ideally, this hack could be removed if the short-pathfinder was quick
enough / units were better at aborting.
Fixes concern raised by Freagarach on a7da40ac2f.
Refs #5624 in that the max-short-path range is the source of the lag.
Reviewed By: Angen
Differential Revision: https://code.wildfiregames.com/D2871
This was SVN commit r23867.
Changing Grid.h should recompile faster, as it is now included in fewer
TUs.
Differential Revision: https://code.wildfiregames.com/D2784
This was SVN commit r23774.
Range manager has several `std::vector` for fixed-size arrays and 2D
grids. By using proper data structures, the code readability is
improved.
This also moves around the LosVisibility enum.
Comments by: Stan`, nani
Differential Revision: https://code.wildfiregames.com/D2770
This was SVN commit r23769.
This is the same commit as 2abd9cead2 / D1418, fixing noted issues.
This addresses two related issues:
- Units visibly garrisoned on gates keep the gate open.
- Units visibly garrisoned on entities keep their pathfinding blocker
flags.
De-activate the obstruction of visibly-garrisoned entities, fixing the
2nd issue.
Keep a list of entities that cannot move and thus should not count
towards gate-opening logic.
Packing logic is kept separate: it is more related to entities having
'alternate forms' with different capabilities than being currently
incapable of moving.
Based on work by temple
Fixes#2679.
Fixes#5151.
Differential Revision: https://code.wildfiregames.com/D2775
This was SVN commit r23731.
Player-testing has revealed QA issues, so reverting these for now.
Differential Revision: https://code.wildfiregames.com/D2773
This was SVN commit r23714.
This addresses two related issues:
- Units visibly garrisoned on gates keep the gate open.
- Units visibly garrisoned on entities keep their pathfinding blocker
flags.
Remove the block-movement flag from visibly garrisoned entities.
Keep a list of entities that cannot move and thus should not count
towards gate-opening logic.
Packing logic is kept separate: it is more related to entities having
'alternate forms' with different capabilities than being currently
incapable of moving.
Based on work by temple
Comments by: Freagarach
Tested by: Nescio
Fixes#2679Fixes#5151
Differential Revision: https://code.wildfiregames.com/D1418
This was SVN commit r23710.
This fixes an off-by-one error that led to entities sometimes getting
stuck against obstructions.
It also increases the max-range of the short pathfinder to help entities
find their way around corridors and house blocks.
Fixes 2ff8614ce2 (off-by-one error) and reverts the range changes from
32e8ed51aa
Reported By: Freagarach
Fixes#5586 . Refs #5624
Differential Revision: https://code.wildfiregames.com/D2754
This was SVN commit r23699.
This allows Atlas not to rely on eval() to get access to the attack
component.
Add a quick test for the added method.
This fixes the animation speed matching that of the actor instead of the
template.
Remove some dead code after af2abb8cbfFixes: #5129
Reviewed by: @Angen
Comments by: @elexis
Differential Revision: https://code.wildfiregames.com/D2464
This was SVN commit r23592.
This is adding support to handle garrisoned entities defined in map
files by game engine and atlas allowing future extension for atlas ui
and solving recreation of entites on init in D1958. Also solving
deepfreeze described in D2562.
Differential Revision; https://code.wildfiregames.com/D2597
Ticket: #3008
Patch by: Freagarach
Comments by: elexis
This was SVN commit r23529.
Check for player being out of bounds after m_TerritoryCellCounts may be
recomputed.
Differential Revision: https://code.wildfiregames.com/D2046
Reviewed by: @Stan
This was SVN commit r23510.
Fail movement for formationmember when cannot find path to destination
and formationcontroller is not moving so formationmember will enter idle
state or follow next command relying on member stopping movement first.
Introduced in a1dc9cadd8.
Differentail Revision: https://code.wildfiregames.com/D2438
This was SVN commit r23496.
Avoids computing the square of the compared value every call.
Differential Revision: https://code.wildfiregames.com/D2058
Reviewed By: Vladislav
This was SVN commit r23489.
Allows to place buildings a bit faster and more perfectly aligned. Also
it helps to find a nearest placeable position in some cases.
Reviewed By: elexis
Comments By: Stan, wraitii
Differential Revision: https://code.wildfiregames.com/D2079
This was SVN commit r23330.
