Allows to place buildings a bit faster and more perfectly aligned. Also
it helps to find a nearest placeable position in some cases.
Reviewed By: elexis
Comments By: Stan, wraitii
Differential Revision: https://code.wildfiregames.com/D2079
This was SVN commit r23330.
In 32e8ed51aa have been changed message from MotionChanged to
MotionUpdate and CMessageMotionUpdate::FromJSVal was not implemented to
reflect changes in message structure.
As a result UnitMotionFlying tries to send MotionChanged message which
not only was renamed, but sending it from js is not supported anymore.
Also reported at this thread:
https://wildfiregames.com/forum/index.php?/topic/27294-cheats-error/
Differential Revision: https://code.wildfiregames.com/D2450
Tested by: @gameboy
Tested on: Jenkins/vs2015, Jenkins/gcc6
Fixes: #5626
This was SVN commit r23208.
Remove gui/common/ hack by going through the GUIInterface and fragile
EndGame() hardcoding by saving if and only if a ReplayLogger exists
following 7470e88624, refs #4020.
Refs D2211, D2213.
Differential Revision: https://code.wildfiregames.com/D2197
Based on patch by: irishninja
Tested on: clang 8.0.1, Jenkins
This was SVN commit r22991.
Make that function static, so that it can be used for these functions
without slowly having to obtain the ScriptInterface instance using
GetScriptInterfaceAndCBData just to get the JSContext again.
Remove few redundant conversions for CreateObject arguments.
Differential Revision: https://code.wildfiregames.com/D2128
Tested on: gcc 9.1.0, clang 8.0.1, Jenkins
Tedious performance testing in: D2128, D2127
This was SVN commit r22894.
As reported by #5521, Ordering units to walk to a point in a forest can
lag terribly, as units will end up computing long short paths in the
forest, which can result in `ComputeShortPath` calls that individually
take upwards of 80ms.
This can be alleviated by allowing units to stop a bit earlier. A23
handled this in UnitMotion directly, but it's better to handle this in
UnitAI to avoid surprises and to make it customisable on a per-state
level.
This diff further speeds up using the short pathfinder by starting with
a smaller search range, limiting the max-range more and moving the range
slightly towards the goal.
This also refactors UM sending messages to UnitAI so that we may in the
future push more information (in particular, the entity_id that a unit
was obstructed by could be interesting for COMBAT).
This doesn't fix the possibility of lag, but it reduces its occurrence
to levels that should be similar to A23 and thus acceptable enough.
Tested By: Freagarach
Fixes#5521
Differential Revision: https://code.wildfiregames.com/D2105
This was SVN commit r22526.
"MoveStarted" messages were sent by UnitMotion when the unit started
moving (sort of) or failed to do so. This was used by formations and
guarding but was not really necessary as this can be done in "enter" or
in a timer.
Differential Revision: https://code.wildfiregames.com/D1885
This was SVN commit r22350.
JSInterface_L10n.cpp from d6db5a466d,
JSInterface_Renderer.cpp and JSInterface_GUITypes.cpp from 4b1297b328,
JSInterface_VisualReplay.cpp from b830233498,
JSInterface_Game.cpp from 5f8be8e0c6,
JSInterface_Simulation.cpp from 921c5515a6,
JSInterface_Debug.cpp from d6cb9c845b,
JSInterface_Main.cpp from 486aec18d4, refs #4772,
JSInterface_Mod.cpp where it was incorrectly removed in af03c72f76.
Refs D1470.
Sort includes alphabetically, add recent Coding Convention macro
comments.
This was SVN commit r21789.
Template-ize CallFunctionVoid.
Changes CallFunction parameter order to make template parameter
deduction with
variadic parameters work nicely.
Reviewed By: Itms, wraitii, Yves
Differential Revision: https://code.wildfiregames.com/D77
This was SVN commit r19183.
Summary:
To fix tickets like #3335, having a shared vision at the entity level is
needed. This patch implements that in CCmpRangeManager, interfaced with
a new JS component VisionSharing to manage the shared entities visions.
As an example of use case (in addition to garrisoning in allied
structure without the sharedLos tech), we can think of bribing enemy
units: there is a part about it in the patch, but this one is very wip
and not intended to be committed but rather for test purposes of the
feature.
So when garrisoning a unit in another player's building, the vision of
the garrisonHolder is shared (part intended for review). In addition,
for tests of the feature, when clicking on the new bribe icon in the
diplomacy window, a random unit of the chosen player is bribed and share
its vision during 15 s.
Test Plan: Garrison a unit in an allied structure without the sharedLos
tech, or test the wip bribe feature from the diplomacy window.
Reviewers: Itms
Reviewed By: Itms
Subscribers: Stan, leper, O11 Templates, wraitii, elexis, fatherbushido,
Itms, Vulcan, O1 C++ Simulation
Differential Revision: https://code.wildfiregames.com/D60
This was SVN commit r19175.
Based on existing code that was still around from an old(not working)
implementation.
Supports basic control from trigger scirpts (queue, start and stop
camera paths) and works in multiplayer.
This was SVN commit r17594.
This resulted in ALL "units inside obstructions" issues.
Thanks to elexis for the testing.
Fixes#3532, #3450.
Refs #3538 (still OOSes), #3410 (unitmotion remains buggy for
formations, but this is only aesthethic.)
Probably affects #3471 and #3505, but those are not fixed.
This was SVN commit r17152.
With this change, units will not check their movement against all
obstructions when moving: terrain and static obstructions are assumed to
be handled by the long-range pathfinder.
However, when static obstructions are changed, the paths have to be
invalidated. In order to minimize the performance impact, units will
check for obstructions when they move after a passability change. If
they collide with something, they will recompute a path that will take
into account the new passability map.
Also includes some code cleanup. This patch should not change
performance a lot: the lower number of checks should give a small
performance improvement while using the message broadcasting system
should hurt it a bit.
Fixes#3376, #3337, #1914.
This was SVN commit r16998.
This upgrade also introduces exact stack rooting (see to the wiki:
JSRootingGuide) and fixes problems with moving GC. This allows us to
enable generational garbage collection (GGC).
Measurements a few months ago have shown a performance improvement of a
non-visual replay of around 13.5%. This probably varies quite a bit, but
it should be somewhere between 5-20%. Memory usage has also been
improved. Check the forum thread for details.
Thanks to everyone from the team who helped with this directly or
indirectly (review, finding and fixing issues, the required C++11
upgrade, the new autobuilder etc.)! Also thanks to the SpiderMonkey
developers who helped on the #jsapi channel or elsewhere!
Fixes#2462, #2415, #2428, #2684, #1374
Refs #2973, #2669
This was SVN commit r16214.
Everything is char* now, so we don't need to mess around with different
string types.
Done with:
ag -ls 'LOG(MESSAGE|MESSAGERENDER|WARNING|ERROR)' source | xargs perl
-pi -e'1 while
s/(LOG(MESSAGE|MESSAGERENDER|WARNING|ERROR).*)%[hl]s/$1%s/g'
This was SVN commit r16187.
Done with:
ag -ls 'LOG(MESSAGE|MESSAGERENDER|WARNING|ERROR)' source | xargs sed
-i 's/LOG\(MESSAGE\|MESSAGERENDER\|WARNING\|ERROR\)(L/LOG\1(/g'
This was SVN commit r16183.
I had to change a few other functions to take JS::MutableHandleValue
because JS::Stringify takes a JS::MutableHandleValue as input parameter.
That seems a bit strange because it should not change that value.
I assume it has historical reasons.
Refs #2415
Refs #2462
This was SVN commit r15605.
Changes CallFunction and CallFunctionVoid to use a HandleValue as object
parameter. Also changes some JS serialization/deserialization functions
to only support the JSAPI rooted types (drop support for CScriptVal and
CScriptValRooted there). Some other functions got changed too because
they were closely related.
Refs #2415
Refs #2462
This was SVN commit r15592.
Changes GetProperty, SetProperty and HasProperty and a few other
functions to take handles. The conversions to CScriptVal or
CScriptValRooted at some places should be removed in the future. I've
done that to avoid an even larger patch.
Refs #2415
Refs #2462
This was SVN commit r15568.
JS::MutableHandleValue is similar to JS::HandleValue, but the whole
JS::Value it points to can be replaced.
This change is needed for support of exact stack rooting and moving GC.
Contains a few other trivial API adjustments and style improvements too.
Refs #2462
Refs #2415
This was SVN commit r15534.
In v24 you called JS_InitClass and passed in a definition of JSNative
functions. Later you could call JS_NewObject with this class and the
object would get a prototype with the specified JSNative functions.
In ESR31 you now have to explicitly store the prototype object returned
by JS_InitClass and pass it as prototype argument to JS_NewObject to
achieve the same.
This change modifies our existing ScriptInterface implementation for
custom object types a bit and uses it at places where the JSAPI was used
directly before.
Refs #2462
This was SVN commit r15524.
JS::HandleValue is basically a wrapper around a JS::Value that is safe
for exact stack rooting and moving GC.
I've tried to keep this changeset rather small and isolated and
therefore create additional JS::Rooted<T> values at some places where
the function should eventually directly take a JS::Handle<T>.
The functions "CallFunction" and "CallFunctionVoid" put their arguments
inside a JS::AutoValueVector because this will be passed directly to
"CallFunction_" with ESR31.
Refs #2462
Refs #2415
This was SVN commit r15517.
I guess changes to the map loading sequence caused the TerrainChanged
message to be sent before the map was switched from square to circular
instead of after. The pathfinder didn't notice the switch, so it
continued treating the map as if it were square, allowing units to walk
into the permanent map-corner SOD and vanish, and allowing territories
to expand into the SOD.
Tell the pathfinder explicitly when the map shape changes, so it can
discard its cached data correctly.
This was SVN commit r15277.
