Follows 34b1920e7b.
JSON functions and ToString are movec to their own headers.
Also clean out a few PersistentRooted usage to use the 2-phase init to
clean up scriptInterface usage.
With these functions split off, we can finally clean out headers and
remove ScriptInterface.h from most of them, in favour of smaller and
more precise headers.
Take the opportunity to clarify some comments regarding Mutability.
Differential Revision: https://code.wildfiregames.com/D3961
This was SVN commit r25434.
All ToJSVal/FromJSVal definitions are put in a separate header.
Remove AssignOr[To/From]JSVal duplication.
The functions were already static so this is rather straightforward.
Follows 34b1920e7b and 2bae30c454
Differential Revision: https://code.wildfiregames.com/D3953
This was SVN commit r25428.
This changes ParamNode to use UTF8 values internally (XMB files are UTF8
since cb9d0733ef).
This removes the need for a lot of conversions, speeding things up and
allows cleaning up the validator interface & a few other callsites.
ConstructJSVal could be a tad slower because of UTF8->16 conversions
within Spidermonkey; but the difference is unlikely to be noticeable in
practica.
Also:
- Changes `ToXML` to `ToXMLString` for clarity.
- Add a simple "op" test & show a particular behaviour of merge nodes
that I intend to change somewhat in D3830.
- Remove Component.h from simulation2 PCH - brought in too much.
Tested by: langbart
Differential Revision: https://code.wildfiregames.com/D3834
This was SVN commit r25228.
This is the same commit as 4bb31f084e, reverted in 5d1899785a. Noted
issues were fixed.
Partial revert/fix of 2f19cf86d3 and 2567fee329.
Before this diff, it was possible for a mod containing a cache/ or a
config/ folder to get written to incorrectly.
The issue is VFS can map multiple directories to one 'virtual' path, for
reading mods. However, writing data is problematic: which path to
choose?
The only viable solution is to use a path relative to the highest
priority directory encountered in the VFS path, or write paths could be
'hijacked' by lower-priority mods.
This fixes these issues by:
- Adding a new lookup mode ('Real-path') that explicitly picks the real
path relative to the highest-priority subdirectory in the VFS Path.
- Preventing overwriting a real directory with a lower priority one in
general.
- Revert c0c8132dd4's GetRealPath change, re-introducing the function as
GetOriginalPath.
This also cleans up some duplication that led to empty mod folders in
the user mod path, and cleans up loading the 'user' mod.
It also makes it explicit that a directory must be passed to Mount().
Note that the new 'realpath' lookup can still be somewhat complex with
many mount points at various hierarchy levels, but it is at least
predictable/deterministic without having to be careful about populating
order.
Fixes#2553
Differential Revision: https://code.wildfiregames.com/D3728
This was SVN commit r25107.
Partial revert/fix of 2f19cf86d3 and 2567fee329.
Before this diff, it was possible for a mod containing a cache/ or a
config/ folder to get written to incorrectly.
The issue is VFS can map multiple directories to one 'virtual' path, for
reading mods. However, writing data is problematic: which path to
choose?
The only viable solution is to use a path relative to the highest
priority directory encountered in the VFS path, or write paths could be
'hijacked' by lower-priority mods.
This fixes these issues by:
- Adding a new lookup mode ('Real-path') that explicitly picks the real
path relative to the highest-priority subdirectory in the VFS Path.
- Preventing overwriting a real directory with a lower priority one in
general.
- Revert c0c8132dd4's GetRealPath change, re-introducing the function as
GetOriginalPath.
This also cleans up some duplication that led to empty mod folders in
the user mod path, and cleans up loading the 'user' mod.
Note that the new 'realpath' lookup can still be somewhat complex with
many mount points at various hierarchy levels, but it is at least
predictable/deterministic without having to be careful about populating
order.
Fixes#2553
Differential Revision: https://code.wildfiregames.com/D3217
This was SVN commit r25104.
- Check for pending exceptions after function calls and script
executions.
- Call LOGERROR instead of JS_ReportError when there is a conversion
error in FromJSVal, since that can only be called from C++ (where JS
errors don't really make sense). Instead, C++ callers of FromJSVal
should handle the failure and, themselves, either report an error or
simply do something else.
- Wrap JS_ReportError since that makes updating it later easier.
This isn't a systematical fix since ToJSVal also ought return a boolean
for failures, and we probably should trigger errors instead of warnings
on 'implicit' conversions, rather a preparation diff.
Part of the SM52 migration, stage: SM45 compatible (actually SM52
incompatible, too).
Based on a patch by: Itms
Comments by: Vladislavbelov, Stan`
Refs #742, #4893
Differential Revision: https://code.wildfiregames.com/D3093
This was SVN commit r24187.
SM52 essentially replaces JSRuntime with JSContext (though JSContext
itself was replaced with JSCompartment).
To prepare for this migration, rename all Runtime-related things to
Context.
Part of the SM52 migration, stage: SM45 compatible.
Patch by: Itms
Refs #4893
Differential Revision: https://code.wildfiregames.com/D3091
This was SVN commit r24181.
JSAutoRequest is required before calling into most JSAPI methods, for GC
reasons.
Calling it is required and fragile as one must not forget.
Further, SM52 and later make manipulating JSContext* dangerous as that
can cross Compartment(Realm in SM68) barriers (and ScriptInterface now
matches a Compartment).
The solution to both problems is to avoid using JSContext* in 0 A.D.
itself. To achieve this, a Request class is introduced, and must be used
to access a JSContext* from a scriptInterface. Further, Request is
passed to other ScriptInterface functions isntead of JSContext*, making
it obvious that the caller has already called it, reducing errors and
redundant JSAutoRequest calls.
Only JSNative functions now get a naked JSContext* without protection,
but the likelihood of forgetting a request is lower since many
ScriptInterface functions now expect it.
JSContext* is directly passed to JSAPI functions only.
Part of the SM52 migration, stage: SM45 compatible
Based on a patch by: Itms
Tested By: Freagarach
Refs #4893
Differential Revision: https://code.wildfiregames.com/D3088
This was SVN commit r24176.
Templates should be the same for all players, techs can be used to
provide
different lists of templates if that is needed.
Reviewed By: Itms
Differential Revision: https://code.wildfiregames.com/D25
This was SVN commit r19142.
This avoids vswprintf failures when printing non-ASCII char* strings
from CLogger into the console.
Also convert ScriptInterface::ToString to return UTF-8, to avoid some
utf8_from_wstring calls.
Also remove some unused and redundant CConsole functions.
This was SVN commit r16333.
I had to change a few other functions to take JS::MutableHandleValue
because JS::Stringify takes a JS::MutableHandleValue as input parameter.
That seems a bit strange because it should not change that value.
I assume it has historical reasons.
Refs #2415
Refs #2462
This was SVN commit r15605.
JS::MutableHandleValue is similar to JS::HandleValue, but the whole
JS::Value it points to can be replaced.
This change is needed for support of exact stack rooting and moving GC.
Contains a few other trivial API adjustments and style improvements too.
Refs #2462
Refs #2415
This was SVN commit r15534.
The tests crashed on my Debian systems but not on my Ubuntu system.
The crash happened in line 142 of SpiderMonkey's ThreadLocal.h.
I know that I had to use a workarounnd for contexts to avoid destroying
the context that was created first. I also had in mind that in newer
versions a JS_Init function got introduced which presumably solves this
kind of issues.
Based on this experience I assumed runtimes could have a similar problem
and this patch indeed fixes the issues.
Unfortunately the correct usage of JSRuntimes in that regard is not
documented.
There's only a rater misterious comment in JSAPI.h which hasn't been
cleared up so far and is most likely completely outdated
(https://bugzilla.mozilla.org/show_bug.cgi?id=992641).
This was SVN commit r14995.
This commit contains all the required changes to our source files and
build scripts (hopefully).
A next commit will remove the old stuff of SpiderMonkey 1.8.5.
Spcial thanks to:
- H4writer who helped a lot mainly with the performance issues we
had/have, but also with other problems or questions.
- Leper for the review.
- Historic_bruno for implementing the build scripts on Mac OS X and
testing on the Mac.
- The people from the #jsapi channel and from
mozilla.dev.tech.js-engine who answered a lot of questions and helped
solving problems.
- All the other people who helped
Refs #1886Fixes#2442Fixes#2416
This was SVN commit r14877.
Each GUI Page gets its own compartment and all ScriptInterfaces in the
same thread should now use the same JS Runtime.
This is required for the SpiderMonkey upgrade.
Check the ticket for details.
Closes#2241
Refs #1886
Refs #1966
This was SVN commit r14496.
Add CEntityHandle which wraps an entity_id_t and also has a pointer to a
per-entity array of IComponents. QueryInterface/CmpPtr on a handle just
involve a couple of pointer dereferences instead of a map lookup.
This requires sizeof(void*) per registered interface type per entity,
which is currently ~0.5KB per entity, which shouldn't be a problem.
This was SVN commit r13825.
- use wrapper class instead of std::wstring (reduces mixing of
strings/paths; allows safe+easy join via operator/ and convenient
case-insensitive comparison via operator==, avoids NativePathFromString,
similar to boost::filesystem)
- NativePath -> OsPath
- add hash and To/FromJSVal for Path
- add TS_ASSERT_PATH_EQUALS
- replace _wfopen_s with sys_OpenFile
- remove obsolete SortFiles/Directories
This was SVN commit r9107.
- replace more std::wstring with Native or VfsPath; wstring_from_utf8 ->
NativePathFromString
- replace sequences of Join(Path(), Basename+extension) with
ChangeExtension in wsdl, CacheLoader
- add Path::IsDirectory to replace .empty() / path_is_dir_sep(.back()).
also changed behavior to reflect the fact that "" is the VFS root
_directory_
- Path::Join now allows 2 identical path types (e.g. VfsPath) or one
char* literal (prevents inadvertently introducing non-safe characters).
to convert from wstring or wchar_t, use an explicit ctor (e.g.
VfsPath(wchar_t_string))
This was SVN commit r9091.
Pass terrain passability data to AI scripts.
Expand pathfinder passability data to 16 bits per tile, to allow more
classes.
Support 16-bit ints in serializer.
Partially support JS typed arrays.
Allow foundations to be placed on top of units (fixes#499).
Stop farms and fishes blocking movement (fixes#534).
Add obstruction flags to allow finer control over what they block.
Associate entity IDs with obstruction shapes, to allow finding colliding
entities.
Support moving to the edge of a target entity with inactive obstruction.
Support foundation entities in AI.
Support playing as non-hele civs.
This was SVN commit r8899.
Support direct access to serializer streams, so serializers can be
nested.
Make component script "this.template" read-only.
Stop globally-subscribed component scripts receiving messages posted to
local components, to reduce out-of-sync risks.
Move pathfinder data out of entity template directory.
Fix GuiInterface deserialization.
This was SVN commit r8865.
Add short-range vertex-based pathfinder.
Integrate new pathfinder into unit motion code.
Change obstruction system to get rid of circles, and differentiate
structures from units.
Make PositionChanged messages synchronous.
Try to prevent some accidental float->int conversions.
This was SVN commit r7484.
Don't call xmlCleanupParser after parsing documents.
("This function name is somewhat misleading. It does not clean up parser
state, it cleans up memory allocated by the library itself.")
This was SVN commit r7465.
