Instead just transform the measurement extremities appropriately to
still map to the same points.
To do so, I also added out parameters to gimp_image_resize_to_layers()
so that calling code can get offsets from old origin (as well as new
image dimensions).
(cherry picked from commit d56a8d439e)
specified by GimpDataLoaderEntry structs. Remove the same code from
GimpDataFactory and make it an abstract base class that only serves as
an interface for actual implementations. Also move around some stuff
in GimpDataFactory and remove virtual functions that were a bad idea
in the first place.
(cherry picked from commit 73da7c9a54)
so pull it to the parent class. Also remove the "no_data" parameter
from the data_init() virtual function and handle it in
gimp_font_factory_data_init() itself.
(cherry picked from commit d1b9f74c6f)
Virtualize a lot of functions and move their code into the default
implementation. Also connect to changes of the "path" property and
reload data automatically when the path changes. Add "wait" method
which is by default empty but is to be implemented by fonts.
(cherry picked from commit 01e4104236)
Make sure gimp_async_set_wait() and gimp_async_set_cancel() work
correctly, even if the set changes in nontrivial ways as a result
of waiting-on/canceling individual operations. This is purely
theoretic right now, but why not.
(cherry picked from commit ec5f4d03fa)
This is mostly core code which we want to keep in sync with master as
long as possible, so I picked this one even though not strictly
neccessary.
(cherry picked from commit 1b7d63cce9)
Add a GimpGui::wait() virtual function, and a corresponding
gimp_wait() function. The function takes an object implementing
the GimpWaitable interface, and a printf-style message, and waits
for the object to become ready, displaying the message as
indication in the meantime. The default implementation simply
prints the message to STDERR.
Implement the function in gui-vtable, using the busy-dialog plug-
in added in the previous commit, to display the message in a
dialog. Additionally, if the object implements the GimpCancelable
interface, provide a "cancel" button in the dialog, which, when
pressed, causes gimp_cancelable_cancel() to be called on the
object. Note that the function keeps waiting on the object even
after requesting cancelation; GimpTriviallyCancelableWaitable can
be used to stop the wait once cancelation has been requested.
Replace the boolean fonts_loading member of Gimp with
fonts_async_set, which is a GimpAsyncSet object. This allows us
to easily respond to the completion of font loading and reloading,
as will be done in the next commits.
Additionally, move the call to FcConfigSetCurrent(), used to
activate the loaded font configuration, from the async thread to
the main thread, just to be on the safe side, and avoid calling
FcInitReinitialize() in gimp_fonts_reset() if font loading is still
in progress, which is unsafe.
GimpAsyncSet represents a dynamic set of running GimpAsync objects.
The objects are automatically removed from the set once they're
synced.
GimpAsyncSet implements the GimpWaitable and GimpCancelable
interfaces, allowing the entire set to be waited-on or canceled.
Additionally, GimpAsyncSet provides an "empty" property, which
indicates whether the set is empty or not. This allows responding
to the completion of all the GimpAsync objects through the set's
"notify::empty" signal, or drive UI changes through property
bindings.
GimpTriviallyCancelableWaitable is a proxy object for another
GimpWaitable object, implementing both the GimpWaitable interface
and the GimpCancelable interface. While waiting on the proxy
simply waits on the underlying waitable, canceling the proxy
doesn't affect the underlying waitable, even if it implements
the GimpCancelable interface as well, but rather causes subsequent
wait operations on the proxy to successfully complete immediately.
This essentially causes cancelation to abort only the wait, rather
than the underlying operation.
GimpUncancelableWaitable is a simple proxy object for another
GimpWaitable object, implementing only the GimpWaitable interface.
Its main purpose is to mask away the cancelability of an object
implementing both GimpWaitable and GimpCancelable.
In gimp_parallel_run_async(), lower the priority of threads
executing independent async operations. Independent operations
are generally potentially long-standing background tasks, which we
don't want to bog down the rest of the program.
This is currently only implemented on Linux and Windows.
In gimp_parallel_run_async(), when aborting a GimpAsync operation
in reponse to its "cancel" signal, properly clean up internal data
attached to the object, to avoid use-after-free if the signal is
emitted again.
(cherry picked from commit 3fa4c01bcf)
Add a boolean "independent" parameter to gimp_parallel_run_async().
When FALSE, the passed function is run in the shared async thread
pool; when TRUE, the passed function is run in an independent
thread.
Generally, async operations should run in the async pool, however,
it might be desirable to run long-standing operations, especially
ones that can't be canceled, in independent threads. This avoids
stalling quicker operations, and shutdown.
Adapt the rest of the code for the change. In particular,
initialize the font cache in an independent thread.
(cherry picked from commit ad8add6808)
In gimp_parallel_run_async(), connect to the returned GimpAsync's
"cancel" signal, and abort the operation in response if it's still
enqueued, i.e., if its execution hasn't started yet.
(cherry picked from commit 3958ffbe50)
Have GimpAsync implement the GimpWaitable and GimpCancelable
interfaces, added in the previous two commits, instead of providing
its own public version of the corresponding functions.
Add gimp_async_cancel_and_wait() as a convenience function for both
canceling an async operation, and waiting for it to complete.
Adapt the rest of the code to the change.
(cherry picked from commit e2c56ef407)
Fonts should not be blocking startup as this provides a very bad
experience when people have a lot of fonts. This was experienced even
more on Windows where loading time are often excessively long.
We were already running font loading in a thread, yet were still
blocking startup (thread was only so that the loading status GUI could
get updated as a feedback). Now we will only start loading and proceed
directly to next steps.
While fonts are not loaded, the text tool will not be usable, yet all
other activities can be performed.
(cherry picked from commit 2484dec7d5)
Improve the formalism of a GimpAsync object being "sycned"
(previously referred to as the main thread being "synced" with the
async thread), by both providing a gimp_async_is_synced() function,
separate from gimp_async_is_stopped(), and by improving the type
and function descriptions.
Make sure all previously added callbacks have been called after a
call to gimp_async_wait[_until](), even if these functions are
called from within a callback.
(cherry picked from commit a901c3c1f4)
... which is similar to gimp_async_wait(), taking an 'end_time'
parameter, controlling how long to wait for the async operation to
complete.
(cherry picked from commit 68c57548fd)
In gimp_drawable_gradient(), pass the undo description ("Gradient")
to gimp_gegl_apply_operation(), so that its displayed as the
progress text while rendering the gradient, even when applying a
shaped gradient, in which case we end the progress after
calculating the distance map, causing the progress text be NULL
during rendering unless explicitly set.
(cherry picked from commit deee2f14f5)
Implement GimpPickable::get_pixel_average(), added in the previous
commit, in GimpDrawable, GimpImage, and GimpProjection, using
gimp_gegl_average_color(), added in the commit before last. This
is significantly faster than the default implementation.
... which calculates the average color of the pickable over a given
area. Use this function in gimp_pickable_pick_color() when
sample_average is TRUE, and provide a default implementation which
calculates the average color using GimpPickable::get_pixel_at(), as
gimp_pickable_pick_color() did before.
The default implementation is rather slow; classes that implement
the GimpPickable interface can provide a faster specialized version
(see the next commit).
GimpDeviceInfo is the only way to store per-device settings like
color, brush etc. It used to be derived from GimpContext and therefore
limited to the context's properties, causing everything else (all
tool-individual options) to be lost on device change.
Derive it from GimpToolPreset instead, so it's capable of storing
arbitrary tool options.
Adapt things to the new class hierarchy and add a bunch of signal
handlers that make sure the active device's GimpDeviceInfo is updated
properly when the tool changes. Also change device switching
accordingly.
Change GimpDeviceStatus to only show the stuff that is relevant to
each device's tool.
And various small changes to make things work properly...
...like gaussian blur in indexed mode
In GimpDrawable's source node, after the filter stack, insert a node
that converts the pixels back to the drawable's format if the drawable
is indexed.
In gimp_pickable_contiguous_region_by_seed(), use gegl_buffer_get()
to sample the mask buffer, instead of using a sampler. The sampler
is created at the beginning of the operation, and is subsequently
used after modifying the mask buffer, which should be avoided,
since the sampler may return outdated cached data.
... which provides a set of higher-level lock-free atomic
operations.
Currently, the only two operations are
gimp_atomic_slist_push_head() and gimp_atomic_slist_pop_head(),
which atomically push/pop the first element of a GSList.
Code cleanup.
Improve function descriptions.
Improve function precondition checks.
Make sure the main thread is properly synced with the async thread
before calling the completion callbacks in the idle function.
Guarantee that all callbacks are called in FIFO order, even
callbacks added during the execution of other callbacks.
... which is similar to gimp_drawable_calculate_histogram(),
calculating the histogram asynchronously on a separate thread.
Note that when calculating the histogram of the drawable's source
node, the node is rendered synchronously on the main thread (if
necessary), and the histogram of the result is calculated
asynchronously on a separate thread.
... which runs a user-provided function asynchronously, returning a
corresponding GimpAsync object. This can be used to execute code
off the main thread, using the GimpAsync object to synchronize as
necessary.
Note that while the code allows for running multiple asynchronous
functions in parallel in a thread pool, we currently limit the pool
to a single thread, queueing overlapping async function, since we
have no use for parallel asynchronous functions at the moment.
GimpAsync represents an asynchronous task, running without blocking
the main thread. It provides functions that allow waiting for
completion, queueing completion callbacks, and requesting
calcelation. See the code for more details.
The interface and the implementation are intentionally limited for
the time being, to keep things simple, and are geared toward
asynchronous tasks executed on a separate thread (see the next
commit). The public interface is relatively general, however, and
we may extend the implementation to support other kinds of tasks at
some point, who knows...
To avoid an infinite loop, gimp_item_linked_is_locked() was temporarily
unlinking items before calling gimp_item_is_position_locked(). This
worked only based on gimp_item_real_is_position_locked() code which
called gimp_item_linked_is_locked() only when it was linked. It did not
take into account the fact that it was an abstract method which could
have other implementations. In particular the group layer implementation
would call in turn gimp_item_is_position_locked() on each child layer.
Basically temporarily unsetting the link was anyway a very ugly hack.
The point is simply that we are only interested by the value of the
`lock_position` flag for this item, without further "intelligence". For
this, use gimp_item_get_lock_position() instead.
... closing one of them crashes GIMP
GimpSymmetry keeps a strong reference to the drawable passed to
gimp_symmetry_set_origin() until the next call to set_origin(), or
until it's destroyed. This can unnecessarily extend the lifetime
of the drawable. In particular, it can extend the lifetime of a
floating selection past the destruction of the image mask, during
image destruction, which results in a NULL mask pointer in
gimp_layer_invalidate_boundary(), called when detaching the
floating selection as part of its destructor.
Add gimp_symmetry_clear_origin(), which clears the origin set using
gimp_symmetry_set_origin(), dropping the reference to the drawable,
and call it in gimp_paint_core_paint() after painting. This avoids
extending the lifetime of the drawable, and fixes the bug.
In gimp_drawable_calculate_histogram(), when including the
drawable's filters in the histogram (i.e., when calculating the
histogram of the drawable's source node, rather than its buffer),
if the drawable is a projectable, call
gimp_projectable_{begin,end}_render() before/after calculating the
histogram, respectively. This is necessary for pass-through
groups, whose {begin,end}_render() functions disconnect/reconnect
the group's backdrop from/to the group's layer stack. If we fail
to do this, the backdrop is erroneously included in the histogram.
Note that currently layer groups can't have any filters applied to
them, so we never run into this situation, but once we have non-
destructive editing we probably will.
... drifts/sharpens when applying additional gradients
In GimpDrawableFilter, don't use gegl:over for operations without
an input pad, since this only works if the filter's mode is
REPLACE. If the filter's mode is different, in particular, if it's
NORMAL, we end up compositing the operation's output against the
input twice: once in gegl:over, and again in the filter's
applicator. Notably, this happens for the gradient tool.
Instead, revert commit 5b80d3d3be
(with some additions to avoid constructing unnecessary nodes when
the operation has no input) and simply change the applicator's mode
to NORMAL if the oepration doesn't have an input, and the filter's
mode is REPLACE.
It is not used anywhere anymore and can be replaced by the more powerful
gimp_stack_trace_print() (which can also allocate a string containing
the backtrace, hence is a proper replacement call).
As proposed on IRC. This will allow people to debug their fonts (for
instance when there are permission issues or whatnot) by knowing the
list of problematic fonts in an error dialog at startup (and not only on
terminal).
Absolute paths not to be used in $XDG_CONFIG/GIMP/{version}/tags.xml.
These are actually only an identifier, and not used as a path at all
anyway. Moreover MyPaint brushes even generate checksum (which allows
to remap the GimpData appropriately even if the paths are changing).
But anyway it's better not to have absolute paths when we can prevent
so.
Symmetric conical gradients only span half a revolution (unlike
assymetric ones, which span an entire revolution), and therefore
require only half the cache size.
Add a crop node to the GimpDrawableFilter graph, applied after the
filter's output, cropping the output to the filter area (the same
area used for the input crop node). If we fail to do this, filters
whose op's bounding box is bigger than the input region can affect
areas outside the drawable, when the filter is rendered as part of
the image graph (in contrast to being comitted). This is
particularly relevant to source ops, that may have an infinite
bounding box.
We probably didn't notice this until now, since before the recent
GimpProjection update-area changes, only the drawable's area would
get invalidated in response to changes in the filter, so regions
outside the drawable wouldn't normally get rendered. However, this
could still have been triggered by causing regions outside the
drawable to be invalidated by other means.
Add gimp_drawable_gradient_adjust_coords(), which adjusts the
gradient segment coords according to the gradient type, so that, in
cases where the gradient span is unrelated to the segment length,
the gradient cache (in GimpOperationGradient) is big enough not to
produce banding. Use the new function in gimp_drawable_gradient()
and in the gradient tool, instead of duplicating the logic.
Move the shapreburst coordinate-adjustment logic to the new
function, and add appropriate logic for conical gradients.
Remove the code that avoids using the gradient cache for conical
gradients from GimpOperationGradient.
In the various types of fill operations, and in fade operations,
use the paint composite-mode of the current paint mode, which is
the composite mode we use during painting, instead of AUTO, which
results in the default mode we use for layer compositing. This
effectively means that filling using any non-legacy, non-
subtractive mode can paint over transparent areas, rather than
being limited to nontransparent areas.
When merging a pass-through group, change its mode to NORMAL first,
to avoid a critical when duplicating the group as a regular layer.
Preserve the group's blend/composite space/mode while changing its
mode (note that only the composite space currently matters, since
the other parmaeters are immutable for pass-through groups.)
... it doesn't exist.
The tmp/ dir in the config folder should already be created by GIMP, but
just in case it is not there, try and create it, since all code calling
these assumes that it exists.
... raises a CRITICAL
gimp_item_{start,end}_move() currently serves two different
purposes: It is used by GimpLayer to suspend/resume mask resizing
of the layer's ancestors; this is necessary whenever an operation
on a layer might affect the size of its ancestors. It is also used
by GimpGroupLayer to suspend/resume its own mask resizing; this, on
the other hand, is only necessary before applying one of the
transformation functions to the group, so that mask modification is
handled by GimpLayer. In other words, the effects of
gimp_item_{start,end}_move() on group layers are only necessary in
a subset of the cases in which these functions are used.
While in itself this isn't a problem, it does cause issues when
removing a group layer: gimp_image_remove_layer() calls
gimp_item_start_move() before removing the layer, and
gimp_item_end_move() afterwards. While the former function is
called while the layer is still attached to the image, the latter
function is called after the layer is no longer attached. Since
GimpGroupLayer pushes an undo step in response to these calls, only
the call to start_move() results in an undo step, while the call to
end_move() doesn't, resulting in an unbalanced
GIMP_UNDO_GROUP_LAYER_START_MOVE undo step on the stack. This
causes problems when undoing the operation.
Add gimp_item_{start,end}_transform() functions, and corresponding
GimpItem::{start,end}_transform() virtual functions, which are more
specialized versions of gimp_item_{start,end}_move(), which should
be used instead of the former before/after transforming an item; in
other cases, such as when removing ot reordering an item,
gimp_item_{start,end}_move() should still be used. The default
implementation of GimpItem::{start,end}_transform() calls
gimp_item_{start,end}_move(), respectively, so subclasses that
override these functions don't have to do that themselves.
In GimpGroupLayer, override GimpItem::{start,end}_transform(),
instead of GimpItem::{start,end}_move(), for the same purpose of
suspending mask resize. This avoids these functions from being
called when removing a layer group, fixing the bug.
In gimp_image_reorder_item(), call gimp_item_start/end_move()
before/after reordering the item (and use an undo group, so that
the resulting undo actions are grouped together with the reordering
undo action,) so that if the item is a child of a group layer, and
reordering moves it out of the group in a way that causes the
group's mask to be resized, the mask will be properly restored when
undoing the operation.
Rename gimpdrawable-blend.h to gimpdrawable-gradient.h. Note that
this commit only renames the file; the actual changes are done in
the next commit, so that git doesn't consider this a new file.
Partially revert commits 4f2e078ccb
and b0beb0197a, since the changes
they introduced to some of the renamed files were big enough for
git to consider them entirely new files, hence we lost their
history. The next few commits fix this.
This commit also partially or entirely undoes followup commits
5f6dfc7617,
c3f98cccbd,
6b0f5136e0,
and 3736bfd189, which will be
restored by the next few commits as well.
Using CIE Lab yields gradients that more closely resemble the perceptual
gradients but without the gamma based blending problems of linear-RGB / CIE
XYZ.
This includes migrating properly any custom shortcut (menurc), as well
as a few strings in tool-presets/, and finally "gimp-blend-tool" in
contextrc and devicerc.
File toolrc also has some occurrences, but we are already skipping it
anyway, same as whatever is under tool-options/.
Hopefully I missed nothing.
First WIP commit, adds:
- enum GimpGradientBlendColorSpace { RGB_PERCEPTUAL, RGB_LINEAR }
- linear blending mode for gradient segments
- tool options GUI for the blend and paint tools which use gradients
... edges for MyPaint brush.
Adding the concept of "stateful" symmetry when a tool needs to make sure
of corresponding stroke numbers and orders while painting (i.e. stroke N
at time T+1 is the continuation of stroke N at time T). This is the case
for the MyPaint brushes and the ink tool.
Make sure a channel -> selection -> channel roundtrip never does any
gamma conversion.
In gimp_channel_duplicate(), make sure a created channel has the
right format, and the right data. Fixes selection -> channel.
When switching off quick mask, call gimp_item_to_selection() instead
if gimp_selection_load(), the latter was implementing a shortcut which
is now wrong.
Remove gimp_selection_load() which is now unused.
Unrelated: also remove gimp_selection_save(), it was an obvious
3-liner used only twice.
In GimpPaintTool, brush outline generation took place during
gimp_paint_tool_draw() even while painting. This function is run
concurrently with the paint thread. When using dynamics, this
introduced a race conidition between updating the brush mask in the
paint thread, and updating the brush boundary in the main thread.
Move brush outline generation during painting to
gimppainttool-paint.c, and perform it in the display-update
timeout, while the main thread and the paint thread are
synchronized.
Storing selections and layer masks as linear grayscale, but channels
as whatever-the-layers-are caused severe problems in images with
gamma-corrected layers: when combining channels with the selection,
they would go thorugh a gamma conversion before being combined, giving
unexpected results.
This commit changes all channels to always be linear, except in 8-bit
images, where they continue to be "Y' u8", for compatibility with old
XCF files, and because linear 8-bit can't really be used in
compositing (channels can be visible too).
To fix channel -> selection combinations also for these images, add a
small hack to gimp_gegl_mask_combine_buffer() which makes sure the
to-be-combined channel's pixels are always read as-is, without any
gamma conversion. After changing channels to linear, this makes no
difference except in the 8-bit images where we need this hack.
gimp_drawable_start/end_paint() are used to enter/exit paint mode
for a given drawable. While the drawable is in paint mode,
gimp_drawable_get_buffer() returns a copy of the real drawable's
buffer, referred to as the paint buffer, so that modifications to
the returned buffer don't immediately affect the projection, and
calls to gimp_drawable_update() queue the updated region, instead
of emitting an "update" signal.
gimp_drawable_flush_paint() can be called while the drawable is in
paint mode, in order to copy the updated region of the paint buffer
back to the drawable's real buffer, and to emit "update" signals
for the queued region.
We use these functions in the next commit, to move painting to a
separate thread in the paint tools.
Last commit caused -xobjective-c to be passed during linking on
Mac, causing object files to be treated as source files. Add a
-xnone flag to AM_LDFLAGS, canceling the effect of -xobjective-c.
Additinally, add a -xobjective-c++ flag to AM_CXXFLAGS, so that we
can use Objective-C in C++ files on Mac, if we ever need to.
On Mac, pass -xobjective-c to the compiler through AM_CFLAGS, not
AM_CPPFLAGS, so that it's only used for C sources, and not C++
sources. In the latter case, it clashes with the -std=... flag,
spewing an error. Thanks, Partha :)
gimp-templates.c:143:15: warning: ‘strncpy’ output truncated before terminating nul copying 3 bytes from a string of the same length [-Wstringop-truncation]
strncpy (dpi, "ppi", 3);
^~~~~~~~~~~~~~~~~~~~~~~
The next commit is going to parallelize gimpbrush-transform using
the gimp_parallel_distribute_foo() functions. To spare us a lot of
boilerplate code, we're going to use C++ lambdas as callback
arguments to these functions.
This commit does the initial conversion of gimpbrush-transform.c to
C++, renaming it to gimpbrush-transform.cc. We do this in a
separate commit, so that the changes are small enough for git to
register this as a renamed file, rather than a new file, so that we
don't lose the file's history.
Add gimp-parallel.[cc,h], which provides a set of parallel
algorithms.
These currently include:
- gimp_parallel_distribute(): Calls a callback function in
parallel on multiple threads, passing it the current thread
index, and the total number of threads. Allows specifying the
maximal number of threads used.
- gimp_parallel_distribute_range(): Splits a range of integers
between multiple threads, passing the sub-range to a callback
function. Allows specifying the minimal sub-range size.
- gimp_parallel_distribute_area(): Splits a rectangular area
between multiple threads, passing the sub-area to a callback
function. Allows specifying the minimal sub-area.
The callback function is passed using an appropriately-typed
function pointer, and a user-data pointer. Additionally, when used
in a C++ file, each of the above functions has an overloaded
template version, taking the callback through a generic parameter,
without a user-data pointer, which allows using function objects.
If variables are edited directly, in some cases, the GUI and the
symmetries may end up out-of-sync. The variable can only be edited
through property setting.
This value is actually used as a special value when removing a guide to
get rid of a symmetry, in particular it is set in the guides' callback
gimp_mirror_guide_removed_cb() for "removed" signal.
If not setting to 0, when adding back a symmetry, it starts with weird
low or high values near to border (whereas when set to 0, it is reset to
default position afterwards).
... parasite.
Not sure if that should be considered a bug. On one hand, it should
because that's core code. On the other hand, symmetry saving currently
uses parasites, which is a feature which can also be used by people
randomly. So "theoretically", there could be any data in a parasite and
we should not assume specific format.
Anyway still keep the error message but just print to standard error
output instead. Also print a bit more details (parasite name and
contents) as it would help for debugging when such a case were to occur.
Care for future changes of symmetries, by adding a version property. For
now, all symmetries are at version 0, and no real check is done. If any
symmetry bumps its settings in the future, it will have to override also
update_version() to change settings properly if necessary, according to
any new behavior.
When adding a rectangle to a projection's update area, align the
rectangle to a coarse grid, to reduce the complexity of the overall
area. We currently align the rectangle to a 32x32 grid, which
seems to be a good tradeoff between the overhead of processing a
complex area, and the overhead of processing a large area.
The debug menu is currently not included in stable versions.
Include the menu unconditionally, but hide it, and its associated
actions, by default in stable versions. Allow enabling the menu
using a new --show-debug-menu command-line option, in the same vein
as --show-playground.
when setting a custom parse error with g_scanner_error() we *must*
return G_TOKEN_NONE as expected token, or general GimpConfig error
handling will try to overwrite our error with its generic "unexpected
token" message, which triggers a warning.
In gimp_image_convert_precision(), don't overwrite the 'progress'
parameter with the object queue, since we need to call
gimp_progress_end() on it at the end of the process.
In gimp_image_resize_with_layers(), calculate the set of resized
layers before changing the image size, so that we correctly
identify image-sized layers w.r.t. the old image size. (Fixes
commit 139a23451ddc588c91610f67daa799afc2f89080.)
Add gimp_item_scale_by_factors_with_origin(), which is an extension
of gimp_item_scale_by_factors(), taking the input/output points of
origin for the transformation (both of which are (0, 0) in the case
of gimp_item_scale_by_factors()). Implement
gimp_item_scale_by_factors() in terms of the new function, and Use
the new function when scaling group layers, instead of manually
calculating the children boundaries, so that the behavior is
uniform across whole-image scaling and group-layer scaling.
The new function rounds all four edges of the boundary to the
image-global pixel grid, instead of only rounding the top/left
edges to the global grid, and the bottom/right edges to the item-
local grid. This preserves layer-adjacency when scaling.
Use GimpObjectQueue, added in the previous commit, in various
instances where we perform an action on a set of objects. This
improves progress reporting, by using a single progress for the
entire operation, rather than reporting the progress of each object
individually, and by taking the relative cost of each object into
account, instead of assuming a uniform cost for all objects.
In particular, this affects the various whole-image operations
(i.e., transformations and color conversions), operations on linked
items, and operations on layer groups. This also affects layers
with masks, whose progress is now reported together instead of
individually.
Additionally, this commit fixes erroneous group-layer mask cropping
during undo when resizing the image, by properly calling
{start,end}_move() on all the resized layers before starting the
operation, and when scaling the image, by only scaling top-level
layers, and letting group layers scale their children themselves.
GimpObjectQueue implements a queue of GimpObjects. It derives from
GimpSubProgress, and hence can be used as a GimpProgress object.
It keeps track of the total memsize of the objects that were
pushed-to and popped-from the queue, and uses these numbers to set
the corresponding subrange of the progress object when an object is
popped.
This provides an easy way to perform an operation on a set of
objects, correctly reporting progress based on the relative sizes
of the objects, which is assumed to be a good estimate of the
relative cost of processing each object.
Make the parent GimpProgress object of a GimpSubProgress instance
settable through a property during construction, so that we can use
it as a base class.
In gimp_group_layer_{start,end}_move(), push corresponding undo
steps, which perform the opposite operation during undo, and make
sure that mask-cropping is frozen during group-layer move
operations.
This fixed erroneous group-layer mask cropping when undoing/redoing
a group-layer move operation multiple times.
When pasting in place over a layer group or a content-locked item,
change the paste type to NEW_LAYER_IN_PLACE, rather than NEW_LAYER,
so that the new layer is still pasted in the right location.
Additionally, avoid showing the "Pasted as new layer because ..."
message when pasting over a layer group or a content-locked item,
when the paste type is NEW_LAYER[_IN_PLACE] to begin with.
Add a crop_input parameter to gimp_gegl_apply_[cached_]operation().
When TRUE, the functions crop the op's input to the destination
rect. This is particularly useful for functions that process the
entire input in one go (by means of get_cached_region()). See the
next commit.
Pass crop_input = FALSE at all call sites for now, to keep the
current behavior.
... (gimp-context-set-paint-method...) is called.
GimpContext initialized with standard paint info at constructed() time
to ensure there is always a paint_info even if none were set manually.
This property is currently only used for gimp_edit_blend() to control
how are computed distances. In the future, it could be used for more
functions making use of "gegl:distance-transform" operation, or even for
other algorithms, if relevant.
This new property obviously comes with 2 new PDB calls:
gimp_context_get_distance_metric() & gimp_context_set_distance_metric()
It seems old blend tool (from GIMP 2.8) was using manhattan distance,
whereas the new one uses euclidean. I guess there must be use cases for
both. In any case, it is a good idea to simply propose the option since
the property exists in the "gegl:distance-transform" operation.
See also bug 781621.
Our composite modes don't correspond directly to the Porter-Duff
operators after which they're named, and these names aren't too
descriptive anyway.
Rename the composite modes as follows:
Source Over => Union
Source Atop => Clip to Backdrop
Destination Atop => Clip to Layer
Source In => Intersection
Update relevant code, including UI text, enumerator names, function
names, and action names.
PDB function gimp_edit_blend() was based on "gimp:shapeburst" operation
whereas the rest of GIMP (in particular, the Blend tool) used
"gegl:distance-transform" which is much faster.
Setting the operation to "manhattan" metric ensures that it still
renders the same way as in 2.8 while being a lot faster.
There was still a problem regarding as how it renders differently from
the Blend tool, but it turns out that the Blend tool is the one
rendering differently from how it used to in 2.8. We should discuss
adding the "metric" property in the tool options.
gimp_spawn_async() is similar to, but more limited than,
g_spawn_sync(). Unlike the latter, gimp_spawn_async() uses
vfork(), instead of fork(), when possible.
On Linux, a process that uses large amounts of memory (as GIMP may)
can hang during a fork() if overcommitting is enabled, and there's
not enough memroy. Using vfork() avoids that, since it doesn't
duplicate the parent's address space.
Revert commit 24fcabc1ca, which
allowed passing a NULL buffer to gimp_drawable_set_buffer[_full](),
leaving the drawable without a buffer in a semi-functional state --
this is too risky.
Instead, have gimp_drawable_steal_buffer() assign an empty 1x1
buffer to the stolen-from drawable, rather than leaving it without
a buffer at all.
... which transfers a buffer from one drawable to another in a safe
manner, leaving the source drawable empty.
There are already two ad-hoc instances where we steal a drawable's
buffer through simple pointer assignment, however, this avoids
performing potentially necessary cleanup and setup. In particular,
since commit d0ae244fe8 this causes
actual errors. The next two commits replace those instances with
calls to gimp_drawable_steal_buffer().
... which clears the drawable's buffer, performing any necessary
cleanup, without setting a new buffer. While the drawable has no
buffer, it can only be used in a very limited way, in particular,
it may be destroyed, and it may be assigned a new buffer.
This is used by the next commit to implement
gimp_drawable_steal_buffer(), which transfers a buffer from one
drawable to another in a safe manner, leaving the source drawable
empty.
Since a few commits, I don't generate the traces anymore in errors.c but
delay this to gui-message.c and rely on the message severity to decide
whether or not generating traces.
Unfortunately none of the current severities are properly describing
this new type of messages. Even GIMP_MESSAGE_ERROR is used everywhere in
our code NOT for actual programming bug, but often for data errors
(which are not bugs but proper messages and should obviously not prompt
a debug trace).
Setting push_undo to FALSE in these functions is premature -- let
this stuff be handled at the actual point where the undo is
pushed, which might correspond to a different item than the one for
which gimp_item_{start,end}_move() was called.
In particular, when removing a layer from the image,
gimp_item_end_move() is called (with push_undo == TRUE) on the
layer after it's been removed, but we still need the appropriate
undo enrties to be pushed for the affected group layers.
... a selection.
The crash was the result of an unmatched gimp_item_end_move() call,
which is an error. Add the matching gimp_item_start_move() call
when starting to drag a selection in GimpEditSelectionTool. Revert
last commit, so that unmatched gimp_layer_end_move() calls are not
silently ignored, and add a check instead.
... a selection.
The regression appeared with commit 10c125c627.
gimp_layer_end_move() may sometimes run even while a symmetric
gimp_layer_start_move() had not run. For instance this happens when
releasing the mouse button after dragging a ctrl-alt-click created
floating layer.
Therefore let's check that layer->move_stack is not NULL before
dereferencing it.
We don't want an infinite number of traces because it takes some time to
get. Until now I was keeping track of traces in app/errors.c, but that
was very sucky because then I was limiting traces per session. Instead
save them as a variable of a GimpCriticalDialog instance. Therefore only
generate the traces for WARNING/CRITICAL at the last second, when
calling the dialog.
When too many traces are displayed, just fallback to just add error
messages only. But then even errors without traces can be time-consuming
(if you have dozens of thousands of errors in a few seconds, as I had
the other day, updating the dialog for all of them would just freeze the
whole application for a long time).
So also keep track of errors as well and as last fallback, just send the
remaining errors to the stderr.
which is just a #define to g_assert for now, but can now easily be
turned into something that does some nicer debugging using our new
stack trace infrastructure. This commit also reverts all constructed()
functions to use assert again.
Completing previous commit, the next switch was not raising any error,
but I believe the new "in place" variants of paste as floating selection
also have to be processed for mask removal.
In a switch(), not all paste type were listed (the new "In Place"
versions in particular were missing), therefore we were hitting a
g_return_val_if_reached() error.
Have GimpChannel connect to the drawable buffer's "changed" signal,
so that we can invalidate the channel's boundary whenever the
buffer contents change. Currently, the calls to
gimp_drawable_invalidate_boundary() dispersed throughout the code
are not enough.
Moreover, invalidate both the boundary and the bounds in
gimp_channel_invalidate_boundary(), since both are necessary when
the buffer changes.
In gimp_layer_start_move(), keep the set of ancestors for which for
which we suspended mask cropping, so that we can resume mask
cropping for the same groups in gimp_layer_end_move(). This is
necessary, since gimp_image_remove_layer() calls gimp_item
start_move() before removing the layer from the layer tree, and
gimp_item_end_move() after removing the layer from the layer tree,
at which point the layer has no ancestors.
Replacing the boolean property "generate-backtrace" by an enum
"debug-policy". This property allows one to choose whether to debug
WARNING, CRITICAL and FATAL (crashes), or CRITICAL and FATAL only, or
only FATAL, or finally nothing.
By default, a stable release will debug CRITICAL and crashes, and
unstable builds will start debugging at WARNINGs.
The reason for the settings is that if you stumble upon a reccurring bug
in your workflow (and this bug is not major enough for data corruption,
and "you can live with it"), you still have to wait for a new release.
At some point, you may want to disable getting a debug dialog, at least
temporarily. Oppositely, even when using a stable build, you may want to
obtain debug info for lesser issues, even WARNINGs, if you wish to help
the GIMP project.
It can be argued though whether the value GIMP_DEBUG_POLICY_NEVER is
really useful. There is nothing to gain from refusing debugging info
when the software crashed anyway. But I could still imagine that someone
is not interested in helping at all. It's sad but not like we are going
to force people to report. Let's just allow disabling the whole
debugging system.
We avoid resizing the mask as a result of changes in the group's
bounding box while the group is being moved (i.e., translated,
rotated, etc.), so that GimpLayer transforms the original mask,
rather than a cropped mask. We still need to crop the mask after
we're finished moving the group, however. This commit takes care
of that.
Override GimpItem::resize(), instead of GimpLayer::resize(), when
resizing a group layer, so that GimpLayer doesn't try to resize the
mask. Instead, the let the usual mask resizing logic in
GimpGroupLayer handle that.
Also, make sure that the mask is properly restored upon undo when
group resizing is suspended outside of any mask-suspension block,
which can happen when resizing the group.
Add layer-mask support for group layers. Group-layer masks work
similarly to ordinary-layer masks, with the following
considerations:
The group's mask size is the same as group's size (i.e., the
bounding box of its children) at all times. When the group's size
changes, the mask is cropped to the new size -- areas of the mask
that fall outside of the new bounds are discarded and their data is
lost (sans undo), and newly added areas are filled with black (and
hence are transparent by default).
The new gimp_group_layer_{suspend,resume}_mask() functions can be
used to modify this behavior. Between the outermost pair of
suspend/resume calls, the old mask data is remembered, and is used
to fill the newly added areas while cropping the mask when the
group is resized. We override GimpItem::{start,end}_move() for
GimpLayer, to call these functions (suspend() in start_move(), and
resume() in end_move()) for each of the layer's ancestors.
As a result, while moving a layer, or a set of layers, atomically,
such as while dragging with the move tool, or moving linked layers,
the ancestors' mask data is not lost, and is only discarded at the
end of the operation.
This commit also takes care of properly handling undo for group-
layer mask crops, properly invalidating the image when the group
layer's mask is shown, and enabling the mask actions for group
layers (obviously :).
Add gimp_item_{start,end}_move(), and corresponding
GimpItem::{start,end}_move() virtual functions, which should be
called before/after "moving" the item (i.e., translating, scaling,
resizing, flipping, rotating, or transforming the item). Moves
performed between the outermost pair of start/end calls are treated
atomically.
What exactly does "treated atomically" entail depends on the
subclasses -- GimpItem doesn't provide a default implementation for
these functions, so the current commit doesn't change any behavior.
The next commit, which adds layer-mask support for group layers,
uses the functions to avoid cropping the mask too early while a
child is moving.
GimpItem calls {start,end}_move() in the various "move" functions
(gimp_item_{translate,scale,...}(), before performing the actual
operation. Additionally we call the functions in the
gimp_image_item_list_foo() functions, for each participating item,
so that the items are moved as a unit. We call the functions in
the various gimp_image_remove_foo() functions, since removing an
item may affect the size of its ancestors, and is therefore akin to
moving. We also call the functions in GimpEditSelectionTool, so
that the move tool moves items atomically while dragging.
The result of applying a perspective-transform to a Bezier curve is
only an approximation. When the curve is highly nonlinear, the
result may diverge significantly from the real transformed curve.
Subdivide the curve as necessary in gimp_transform_bezier_coords()
to counter that. Adjust gimp_bezier_stroke_transform()
accordingly.
... which transforms a single cubic Bezier segment, performing
clipping by the near plane, to avoid erroneously transforming parts
of the curve behind the camera.
... which is the same as gimp_transform_polygon(), but using
GimpCoords for the vertices, instead of GimpVector2.
Specify when the input and output arguments may alias, in the
description of gimp_transform_polygon().
Fix indentation, typos, style. Use array parameters for the
control points, instead of using individual by-value parameters.
Use GArray* for the results, instead of GArray**. Verify
arguments.
Adapt the rest of the code to the changes.
When the resulting matrix transforms all input points behind the
camera, negate the matrix, instead of failing, which results in a
matrix that transforms the input points to the corresponding points
in front of the camera. This avoids rejecting certain valid
transforms as invalid, in the generic transform tools (unified,
perspective, and handle transform).
Make the number of input and output points explicit in the
function's signature, and add comments.
... so that the transformed boundary is properly clipped.
Adjust the boundary-size algorithms to operate on arbitrary
polygons.
Avoid using gimp_matrix3_will_explode() in
gimp_drawable_transform_buffer_affine() and falling back to
cropping the result, and avoid setting the "clip-to-input" property
of gegl:transform. Neither of those in needed anymore.
This effectively reverts the app/ part of commit
768d06614f. The next commit revets
the libgimpmath/ part.
gimp_transform_polygon() transforms an (open or closed) polygon by
a GimpMatrix3, performing clipping to the near plane, to avoid
erroneously transforming points behind the camera.
GIMP will now try to get a backtrace (on Unix machines only for now,
using g_on_error_stack_trace(); for Windows, we will likely have to look
into DrMinGW).
This is now applied to CRITICAL errors only, which usually means major
bugs but are currently mostly hidden unless you run GIMP in terminal. We
limit to 3 backtraces, because many CRITICAL typically get into domino
effect and cause more CRITICALs (for instance when a g_return*_if_fail()
returns too early).
Derive GimpUnifiedTransformTool, GimpPerspectiveTool, and
GimpHandleTransformTool from GimpGenericTransformTool, eliminating
their common logic.
Remove gimp_transform_matrix_handles(), which is no longer used.
A subclass of GimpTransformTool, to be used as a base class for
transform tools that calculate their matrix based on 4 pairs of
input/output points, and that display the transform matrix as their
GUI (this includes the unified, perspective, and handle transform
tools; the next commit ports them over to
GimpGenericTransformTool).
When the resulting matrix of the input/output mapping sends any of
the output points to, or past, infinity, GimpGenericTransformTool
sets GimpTransformTool::transform_valid to FALSE, and displays an
appropriate message in the tool GUI, instead of showing the matrix.
When picking a row whose leading coefficient is nonzero, use fuzzy
comparison against an epsilon, instead of exact comparison against
zero, to minimize the effect of numerical errors.
... on top-level layers.
There was even a comment for this, but I missed this when I moved some
code to the top of the function in commit b9577a783d. Now moving this
call up as well. This appeared to be more of a problem when merging
layers without a GUI (script-fu). I'm guessing the GUI calls this anyway
before.
Replace all g_assert_not_reached() in app/core/ by g_return_if_reached()
or g_return_val_if_reached(). GIMP may handle a lot of creative work,
sometimes unsaved for hours. We should not just crash on purpose.
g_assert*() could theoretically be turned off on a glib build, but this
is nearly never done, and is not a solution either (actually it is
probably even worse because the broken code would just continue on a
forbidden path). It is much better to return with a warning on such
forbidden code paths, allowing someone to report a bug without
experiencing a crash and data loss.
For now, I only took care of g_assert_not_reached() inside app/core.
More g_assert*() code should be replaced.
Note: assert are acceptable in plug-ins though, but not in the main
executable, unless absolutely necessary (something happening so bad that
crash is better than continuing).
Don't use g_assert(). Instead use g_return_val_if_fail().
This commit therefore does not fix the actual bug, but at least it does
not crash. GIMP simply outputs a warning upon trying to merge down a
hidden layer. The actual fix will follow later.
Fix the crashes from the third zip:
- forgot to guard the other writing place in the RLE decoder
- one byte after the buffer is still one byte too much
- protect against seeking to bogus offsets
Add brush dimension/depth/compression sanity checks for v6 brushes,
and make sure we don't overrun the RLE decoder's destination buffer.
This properly rejects all brushes from the second zip in the bug.
...in brushes user directory
Consider 8bim section size unsigned, to avoid seeking backward when a
malicious brush includes an 8bim section unknown to GIMP.
This avoids the possibility to start an infinite loop on GIMP start.
Found just a water drop in the ocean, GIMP is still not secure.
Mitch: Added more sanity checks on the Abr's width/height/bytes so now
all brushes in the zip attached to the bug are properly rejected
instead of crashing GIMP.
The C language only promotes data values up to (un)signed int,
which is 32 bit, if no larger data type is used within the
calculation. Having a multiplication of two gint variables,
even if the expected target variable is of type gsize (64 bit),
leads to a possible integer overflow.
This bug can be triggered in gimp_temp_buf_new, which is used
to allocate memory for given supplied dimensions and bytes per
pixel. If triggered, less memory than needed is allocated and
therefore allows out of boundary accesses, either resulting in
possible code execution or information leakage.
While at it, make sure that the supplied format can actually be
resolved to a bytes per pixel value. If not, return NULL.
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
Replace gimp_parameter_*() utility functions with equivalent
gimp_properties_*() functions which deal with separate arrays of names
and values, and use g_object_new_with_properties() instead of
g_object_newv().
This reverts commit 40bc5307dc.
It's not *exactly* the same. The floating selection can belong to a
channel or layer mask. Also, this belongs into the GUI layer, not the
core.
Anchoring a floating layer is basically equivalent to merge down. This
is already what we do in other merging actions (flatten image and merge
visible layers).
Current migration code would still return TRUE for success if the copy
of a regular file failed for any reason.
Also getting rid of some weird block and making sure we free dirname
only when it has been assigned a value.
When recursively browsing folders, there is always the risk of infinite
recursivity, in particular with symbolic links which can create loops.
Let's just assume that we don't have any data over 5 levels of
directories to avoid a security risk.
paintbrush.pgm and paintbrush01.pgm are binary identical. If they were
brushes we ship as data, that would be more annoying because they could
be used in scripts or in various other places. But here it looks they
are used for gimpressionist plug-in only, which means they are probably
not used in some random script. All it takes is probably only to
properly migrate gimpressionist presets.
Presets using "paintbrush.pgm" will be migrated to use
"paintbrush01.pgm" instead.
In particular, I noticed that some data can be on 2 levels (or more?).
For instance gimpressionist presets were not migrated from 2.8 to 2.9
because of this.
Replace the "lock brush size to zoom" paint option with a "lock
brush to view" option, which links the entire brush transform to
the view transform, so that the brush remains invariant in display
space under scaling, rotation, and reflection.
Add support for reflecting brushes as part of their transformation.
The reflection is performed as the last step of the transformation,
across the vertical axis.
The option to reflect the brush is not exposed in the UI, or
through the PDB, but is intended to be used for linking the brush
transformation to the view transformation, in the next commit.
Add an offset_angle parameter to gimp_constrain_line(), which
offsets the radial lines by a given angle.
Add gimpdisplayshell-utils.[ch], with two new functions:
- gimp_display_shell_get_constrained_line_offset_angle():
Returns the offset angle to be passed to
gimp_constrain_line(), in order to constrain line angles in
display space, according to the shell's rotation angle and
flip mode.
- gimp_display_shell_constrain_line(): A convenience function
which calls gimp_constrain_line() with the said offset angle.
Use the new functions in all instances where we constrain line
angles, so that angles are constrained in display space, rather
than image space.
The only exception is GimpEditSelectionTool, which keeps
constraining angles in image space, since it's not entirely obvious
that we want to constrain angles of dragged layers/selections in
display space.
The file formats GBR and PAT contain names which are supposed to be
NUL-terminated within the files. If no such terminating NUL byte
exists, the parsers of GBR and PAT trigger an out of boundary read
during utf-8 conversion.
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
Replace the GIMP_BOUNDARY_HALF_WAY macro by two others : one for perceptual and
one for linear gamma.
Use the GIMP_BOUNDARY_HALF_WAY_LINEAR to compute channels and floating selection
boundaries.
It never belonged inside "tools". Also rename its "pdb" subdirectory
to "groups". This had to happen before 2.10 so cherry-picking between
branches doesn't become a nightmare in the future.
In gimp_layer_new(), set opacity and mode using the setter
functions, instead of modifying the members directly, so that all
the necessary side effects take place.
Add gimp_item_get_merged_color_tag(), which returns the color tag
of the nearest ancestor (including the current item) that has a
color tag other than NONE. Use this function in GimpItemTreeView,
instead of gimp_item_get_color_tag(), to set the cell color of
items, so that item's with a NONE color tag inherit the color of
their parent. Add a boolean "inherited" parameter to
gimp_get_color_tag_color(), which indicates if the color tag is the
item's actual color tag, or an inherited color tag, and modify the
returned color accordingly, so that inherited colors are less
saturated/lighter than non-inherited ones.
Override GimpLayer::get_effective_mode() in GimpGroupLayer, to
perform strength-reduction of pass-through groups to normal groups
under certain conditions (see gimp_group_layer_get_effective_mode()
for the logic.)
The main motivation for this is the fact that Photoshop uses pass-
through mode as the default mode for groups, resulting in many PSDs
using pass-through groups generously and unnecessarily. Since
pass-through groups are more expensive that normal groups, reducing
them to normal groups when possible can make a big difference.
Note that, while the results of the strength-reduced composition
are theoretically equivalent, there may be small differences in
practice due to numerical errors, especially when using low
precision. This is unlikely to be an issue, but, just in case,
allow disabling this optimization using the
GIMP_NO_PASS_THROUGH_STRENGTH_REDUCTION environment variable.
gimp_layer_get_effective_mode() returns the actual layer mode,
blend space, comosite space, and composite mode used for the
layer's mode node, allowing them to be different from the values of
the corresponding layer properties. The aim is to allow us to
replace expensive layer configurations with cheaper but equivalent
ones transparently. This is used in the next commit to replace
pass-through groups with normal groups under certain conditions.
The effective values are computed by the new
GimpLayer::get_effective_mode() virtual function. The default
implementation provided by GimpLayer returns the corresponding
layer properties as-is (replaceing AUTO with concrete values).
Subclasses can override this function, providing more
sophisticated logic.
When attaching a layer as a floating selection to a drawable,
unbind its visiblility from its activeness, as per the previous
commit, and use its visibility to control the activeness of the
drawable's floating selection filter.
Properly update the drawable when the floating selection's
visibility and excludes-backdrop properties change.
Add an "active" property to GimpFilter, which replaces its
"visible" property. The new property assumes the lower-level role
"visible" had -- controlling whether the filter has any effect as
part of its parent filter-stack.
Add a "visible" property to GimpItem, separate from the "active"
property, which assumes the higher-level role "visible" had --
controlling whether the item is considered "visible", as per the
GUI. By default, the item's "visible" property is bound to the
filter's "active" property, so that changes in visibility directly
affect the filter's "activeness"; this binding can be controlled
using the new gimp_item_bind_visible_to_active() function.
This distinction is currently necessary for floating selections.
Floating selection layers must not be active in their parent stack,
regardless of their visibility, in particular, so that their mode
node doesn't hide the entire backdrop when their composite mode
excludes the backdrop (i.e., when it's dst-atop or src-in).
Instead, their visibility should affect the activeness of the
floating-selection filter of the drawable they're attached to.
This is handled by the next commit.
Currently, when a GimpFilter's visibility changes, we rely on its
various visibility-changed signal handlers to rewire the filter
node's graph to reflect the change. This has two main
disadvantages:
- There's no easy, generic way to toggle a filter's effect,
especially one that is not subclassed, since GimpFilter only
takes care of the case where visibility becomes FALSE, and does
nothing by itself when it becomes TRUE again.
- While GimpDrawable does handle the visibility => TRUE case, it
doesn't disconnect the filter's input from its mode and
(potentially) source nodes when it becomes invisible. As a
result, while none of the drawable's graph is processed as part
of the composition when not visible, the mode and source nodes
do get invalidated when the filter's input is invalidated, such
as while painting on a layer below the drawable. This is
particularly bad for pass-through groups, since their source
node can be an arbitrarily complex graph, whose invlidation
incurs a nontrivial overhead.
Instead, don't touch the filter's node at all when visibility
changes, and rather have GimpFilterStack remove it from the graph
entirely when the filter becomes invisible, and re-add it once it
becomes visible again. This solves both of the above problems, as
well as simplifies the code.
Since commit ff59aebbe8, blur-gauss plug-in and the associated
"plug-in-gauss" action don't exist anymore. Migrate any custom shortcut
to "filters-gaussian-blur", which is the expected replacement.
See also bug 775931.
Use gimp:buffer-source-validate, introduced in the previous commit,
for the source node of GimpDrawables. This avoids threading issues
with layer groups, or any other drawables that may use a validating
buffer, by making sure the buffer is validated before any
succeeding operations, and hence the associated graph is processed
on the same thread as the parent composition.
Restore multithreaded processing in GimpOperationLayerMode.
When switching a group layer from pass-through mode to a non-pass-
through mode, flush the projection synchrnously, to make sure that
the projection's buffer gets properly invalidated at that point,
and can be subsequently used as a source for the rest of the
composition.
Add a boolean 'pass_through' member to GimpGroupLayerPrivate, which
indicates if the group is a pass-through group, and use it instead
of checking the group's mode, so that we can detect that the group
used to be a pass-through group when the mode changes, and to
simplify the rest of the code.
Set the priority of group-layer projections according to the group
layer's depth, so that top-level groups have a priority of 1
(compared to a priority of 0 for the image projection), and nested
groups have a priority one greater than their parent (in other
words, shallower groups have higher priority than deeper groups,
all of which have lower priority than the image.)
This makes pass-through groups much faster, in particular.
... which control the priority of the projection's idle source.
The projection's priority is specified relatively to
GIMP_PRIORITY_PROJECTION_IDLE (i.e., a priority of 1 results in an
idle source with priority GIMP_PRIORITY_PROJECTION_IDLE + 1, etc.)
Add GimpViewable::ancestry-changed signal, which is emitted when
the viewable's ancestry changes, i.e., when its parent, or the
parent of one of its ancestors, changes.
Add gimp_viewable_get_depth() function, which returns the
viewable's depth in the hierarchy, i.e., its ancestor count.
The value descriptions of GimpGradientColor,
GimpGradientSegmentColor, and GimpGradientSegmentType enums appear
in the on-canvas gradient editor UI, as combo-box items in the tool
GUI overlay. Since we want to keep the overlay as small as
possible, we previously used abbreviations for these descriptions
(e.g., "FG (t)", instead of "Foreground (transparent)").
Replace the abbreviated descriptions with unabbreviated ones, and
move the abbreviations to the "abbrev" parameter. This way we get
the abbreviated version in the combo-box, and the full version in
the combo-box's menu.
Update the dprod production of generated enum files to include
abbreviated value descriptions, as per the previous commits.
Add a comment for translators above the abbreviated descriptions,
specifying the full description they abbreviate.
When the group's offset changes, update the item's offset *after*
updating the group's offset node, so that the item's offset nodes
and the group's offset node are in sync when the corresponding
"notify" signals are emitted.
It is possible to trigger a heap overflow while opening a malicious
pattern due to integer overflows.
The validation is adopted from plugin-parser. It also takes a proper
cast to gsize to avoid integer overflow in size calculation.
...after exporting the image
Call gimp_image_name_changed() in both gimp_image_clean_all() and
gimp_image_export_clean_all() so we clear the cached displayed URI in
all cases, even if this means we're emitting "name-changed"
redundantly some times.
... from the undo stack
When a blend-tool edit action modifies the gradient, do a deep
comparison of the original gradient against the current gradient,
to test if anything changed, instead of just assuming that
something did change.
Add "In Place" variants for all sorts of pasting:
- extend the GimpPasteType enum with IN_PLACE values
- add the needed actions and menu items
- merge the action callbacks into one, taking an enum value as parameter
- refactor the pasting code in gimp-edit.c into smaller functions
We probably have too menu items in the "Edit" menu now, needs to be
sorted out.
In gimp_group_layer_update_size(), when the layer's bounds have
changed, update the group layer's offset before the call to
gimp_pickable_flush() when reallocating the projection. Otherwise,
if the group layer's graph isn't constructed yet, it will get
constructed during the call to gimp_pickable_flush(), however,
gimp_group_layer_get_graph() will pick up the old coordinates for
the offset node.
... upon NaN values
Make the histogram bin calculation NaN-safe, by mapping NaNs to 0.
Ideally, NaNs should probably not be counted at all, but since we
already count negative values as 0, and > 1 values as 1, we might
as well not pessimize performance over it, at least until we add
support for unbounded histograms.
At the same time, improve rounding in the bin calculation, so that
the result is more accurate.
... leading to a crash
Add gimp_data_is_copyable() and gimp_data_is_dulicatable().
Use gimp_data_is_duplicatable() when setting the sensitivity of the
various "foo-duplicate" actions, instead of inspecting the object's
GimpDataClass::duplicate pointer directly, since this is no longer
an indication of whether a GimpData object is duplicatable or not
(since commit 33de4d5530).
When copying a generated brush, copy its "spacing" property, in
addition to the other properties, which hasn't been previously
copied by ::duplicate().
Finish up commit 17583ff04a, which
ported GimpGradient from ::duplicate() to ::copy(), by doing the
same for the rest of the GimpData subclasses that implement
::duplicate().
We still keep GimpData's ::duplicate() virtual function around,
even though it now points to the default implementation (which uses
::copy()) for all subclasses, since ::copy() is stronger than
::duplicate(), and we might want to have certain GimpData types
that are duplicatable, but not copyable.
Make internal data objects non-renamable, even if they're writable,
through gimp_data_is_name_editable(). Currently, the only such
object is the custom gradient.
Prevent changing the name of non-renamable data by making the name
entry of GimpDataEditor non-editable whenever
gimp_viewable_is_name_editable() is FALSE, even if the data is
otherwise editable.
Prevent the vairous PDB -rename() functions from renaming non-
renamable data, by adding a GimpPDBDataAccess flags type,
specifying the desired access mode for the data -- any combination
of READ, WRITE, and RENAME -- and replacing the 'writable'
parameter of the gimp_pdb_get_foo() functions with an 'access'
parameter. Change the various .pdb files to use READ where they'd
used FALSE, and WRITE where they'd used TRUE; use RENAME, isntead
of WRITE, in the -rename() functions.
Add a framework for saving and restoring internal data objects, in
gimp-internal-data.c. Internal data objects are saved in separate
files under a new "internal-data" subdirectory of the user's gimp
directory. The internal data is saved, restored, and cleared
together with the tool options.
Use this to save and restore the custom gradient. In the future,
we might add similar writable internal data objects that we'd want
to save.
Add an "expanded-changed" signal to GimpViewable, which should be
emitted by subclasses when the viewable's expanded state changes.
Emit this signal when the expanded state of group layers changes.
Respond to this signal in GimpContainerView, by calling a new
expand_item() virtual function. Implement expand_item() in
GimpContainerTreeView, expanding or collapsing the item as
necessary.
Add a composite_space parameter to gimp_gegl_create_flatten_node()
and gimp_gegl_apply_flatten(), which controld the color space --
linear or perceptual RGB -- used for the operation (instead of
hardcoding it to linear).
When removing a layer's alpha channel, use the layer's composite
space for the flattening. When flattening an image, use the bottom
layer's composite space. Keep using linear space when creating a
channel or a mask from a drawable with alpha.
... which return the layer's blend/composite space/mode. However,
unlike the non-"_real" versions, these functions never return AUTO
-- instead, they return the actual space/mode that AUTO maps to for
the current layer mode.
When changing a layer's blend/composite space/mode, avoid
updating the drawable if the real space/mode didn't change (i.e.,
if changing from AUTO to the concrete value, or vice versa.)
When using gimp_gradient_segment_range_compress() to expand a 0-
length segment, redistribute the range's endpoints and midpoints
uniformly, rather than using the regular code path, which would
result in NaN values.
Make sure that the left and right endpoints of the range are
*exactly* equal to the new left and right values. Previously,
they could be slightly off due to numerical errors.
Treat gradient segment exents as [left, right) ranges, instead of
[left, right], so that they don't overlap, and each point
corresponds to a unique color.
Perform less comparisons in gimp_gradient_get_segment_at_internal().
... which merges a segment range into a single segment, that spans
the entire range, and has the same endpoint colors. The merged
segment's midpoint is at its center, and its blend function and
coloring type are those of the range's segments if they're uniform,
or the default ones otherwise.
... which returns the flat (context-independent) left and right
colors of a egment. Replace code that calculates the flat color
explicitly with calls to these functions.
An internal gradient object, that will be used by the blend tool
when editing a gradient. By default, the active gradient will not
be edited directly, but rather, upon editing, the active gradient's
contents will be copied to the custom gradient, which will then
become the active gradient and be edited. This allows editing both
writable and nonwritable gradients without modifying them, and
without having to duplicate them.
... which copies the contents of a GimpData into an existing GimpData,
without creating a new instance.
Add a copy() virtual function to GimpData, which subclasses can
override to implement copying; gimp_data_copy() may only be called
for types that implement copy(). Keep the duplicate() virtual
function around, but provide a default implementation that creates
a new object of the source type, and uses copy() to copy the source
object into it.
... which is emitted when a handle is single/double/tripple clicked.
The signal handler returns a boolean value. A return value of TRUE
stops further event processing, while a return value of FALSE allows
it.
The signal is emitted when a slider is dragged away from the line,
and will be removed when the button is released, and when the
slider is dragged back to the vicinity of the line, and won't be
removed. The last parameter of the signal is a boolean flag
differentiating between the two cases.
Note that a remove-slider signal may be emitted without a preceeding
prepare-to-remove-slider signal, however, is a prepare-to-remove-
slider signal is emitted with a TRUE last parameter, it must be
eventually followed by a remove-slider signal, or by another
prepare-to-remove-slider signal with a FALSE last parameter.
Add support for adding and removing sliders to/from a GimpToolLine,
using three new signals:
- can-add-slider: Takes a double argument in the range [0,1],
indicating a location along the line, and returns a boolean
value, indicating whether a slider can be added at that
location.
- add-slider: Takes a double argument in the range [0,1],
indicating a location along the line, for which can-add-slider
returned TRUE. In response, should add a new slider at that
location, and return its index, or a negative value if no
slider was added.
- remove-slider: Takes a slider index. In response, may remove
the slider.
On the UI side, when the cursor is close enough to the line, but
not within the hit area of an existing handle, GimpToolLine checks
if a slider can be added at the cursor position, using can-add-
slider. If a slider can be added, a dashed circle appears at the
cursor position along the line, indicating where a slider will be
added. The cursor is added by clicking, which emits an add-slider
signal; if the signal returns a slider index, the new slider is
selected, and can be subsequently dragged.
Removing a slider is done by either selecting the slider and
pressing backspace (or delete, although we don't actually forward
it to the tool atm,) or by "tearing" the slider: when dragging
the slider, if the cursor is far enough from the liner, a dashed
circle appears around the slider, and releasing the mouse removes
the slider.
An empty gorup layer has no extent, so we fake its extents to be at
least 1x1 whenever its projection is being recreated, because we can't
have a 0x0 buffer in a drawable. This safeguard was forgotten in
gimp_group_layer_convert_type() which gets called on image duplicate.
