Bug introduced in 76acc4e146.
The previous CUnit code had logic to select random aesthetic variants
once initially. The new code removed that, as I completely missed its
purpose, assuming that the random selection, being based on a seed,
would pick the same variants every time. This is incorrect because
entity selections can change the RNG calls, thus the variants, and thus
entity appearance can change when the animation changes (typically, a
horse will change color when walking and running).
The solution is to re-introduce the choice of actor selections on CUnit
creation. This makes sure that units don't change their purely-aesthetic
selections when e.g. animations change.
Reported by: Wowgetoffyourcellphone
Tested By: Stan
Differential Revision: https://code.wildfiregames.com/D4205
This was SVN commit r25844.
I think there is a small mismatch between CheckMovement & the vertex
pathfinder when computing passability because one is ray-based and the
other just uses edges. However, it's out of my reach to fix it for now.
This can lead to units being stuck near building edges occasionally.
This introduces an un-intrusive recovery strategy (aka a hack) in
HandleObstructedMove that should get the units unstuck.
Should fix#6114 (to a sufficient extent anyways)
Differential Revision: https://code.wildfiregames.com/D4162
This was SVN commit r25786.
Following 40cbde1925, the minimum pushing force is 0.2. This also
happens to be the maximum pushing force any pair of units can exert on
each other, so they can freely overlap instead of being pushed.
This tweaks settings slightly to fix that problem.
Reported by: marder
Differential Revision: https://code.wildfiregames.com/D4129
This was SVN commit r25748.
Introduced in 40cbde1925
MoveToFormationOffset may be called after the formation controller is
reset, leading to issues. It seems best to trust only
SetMemberOfFormation.
This causes the speed glitch experienced by wow & Valihrant.
Differential Revision: https://code.wildfiregames.com/D4128
This was SVN commit r25747.
This overall decreases the deathball effect from units walking to each
other a bit.
- Fix formations - this cleans up a UnitMotion hack for formations,
making it possible to increase pushing ranges without breaking closely
knit formations like testudo.
- Make MINIMAL_PUSHING and the MOVE_EXTENSION configurable, and add a
STATIC_EXTENSION as well.
- Increase the pushing range significantly, making units sparser.
Differential Revision: https://code.wildfiregames.com/D4098
This was SVN commit r25708.
Fixes 592453c62f
wasObstructed and wentStraight are not reset when Move() isn't called,
but PostMove may still be called (if the unit was pushed). This will
OOS.
Differential Revision: https://code.wildfiregames.com/D4088
This was SVN commit r25686.
The pathfinder computations are run asynchronously (and potentially on
the main thread) in-between simulation turns, thus reducing
pathfinder-related lag considerably in common cases.
To make this most efficient, the number of paths computed during a turn
via MaxSameTurnMoves is reduced from 64 to 20.
This has a hard dependency on the obstruction manager (via the vertex
pathfinder) not being modified in-between simulation turn (or to put it
more generally on the simulation state not changing outside of turn
computation), otherwise results will be non-deterministic and go OOS.
This is currently entirely safe (as in, it indeed does not happen that
the simulation state changes in-between turn), but future work towards
improving simulation sandboxing would be good.
Thanks to Kuba386 for maintaining & improving the patch in 2020
Thanks to everyone who tested the various iterations of this patch.
Fixes#4324
Differential Revision: https://code.wildfiregames.com/D14
This was SVN commit r25657.
Reduces the 'clumpiness' of units, particularly when ordered to move to
a single point. The minimum pushing force was increased to compensate.
Differential Revision: https://code.wildfiregames.com/D3978
This was SVN commit r25479.
This removes usage of CmptPrivate outside of ScriptInterface.
ScriptRequest can now be used to safely recover the scriptInterface from
a JSContext instead of going through ScriptInterface, which allows more
code cleanup.
Follows 34b1920e7b
Differential Revision: https://code.wildfiregames.com/D3963
This was SVN commit r25442.
Follows 34b1920e7b.
JSON functions and ToString are movec to their own headers.
Also clean out a few PersistentRooted usage to use the 2-phase init to
clean up scriptInterface usage.
With these functions split off, we can finally clean out headers and
remove ScriptInterface.h from most of them, in favour of smaller and
more precise headers.
Take the opportunity to clarify some comments regarding Mutability.
Differential Revision: https://code.wildfiregames.com/D3961
This was SVN commit r25434.
Follows 34b1920e7b.
This splits off the object-related functions, such as
[Set/Get/Has]Property, CreateObject, CreateArray, FreezeObject.
It also puts the definitions in the header itself, which might end up
with faster code here & there, though perhaps slower compilation time
(somewhat doubtful since we already included most things anyways).
Differential Revision: https://code.wildfiregames.com/D3956
This was SVN commit r25430.
All ToJSVal/FromJSVal definitions are put in a separate header.
Remove AssignOr[To/From]JSVal duplication.
The functions were already static so this is rather straightforward.
Follows 34b1920e7b and 2bae30c454
Differential Revision: https://code.wildfiregames.com/D3953
This was SVN commit r25428.
Follows 34b1920e7b.
This separates StructuredClone & DeepCopy logic into its own header,
reducing the size of the monolithic ScriptInterface header.
Differential Revision: https://code.wildfiregames.com/D3922
This was SVN commit r25419.
TERRAIN_TILE_SIZE is now only used in relevant places in the simulation.
This also makes it mostly possible to use CFixed in constexpr contexts.
Refs #5566
Differential Revision: https://code.wildfiregames.com/D3078
This was SVN commit r25360.
Finishes work started in f3aedf88a6.
This removes the boost-CPP function wrappers entirely, in favour of pure
templated code in FunctionWrapper.h
The Call* functions were already heavily templated, so there is nothing
really new here. I just use tag dispatch to reduce the number of
overloads slightly.
The new functions do not need the script interface, only the script
request.
Differential Revision: https://code.wildfiregames.com/D3912
This was SVN commit r25354.
The main benefits are more convenient code in the component interfaces
TU and no limit on the # of arguments that can be passed.
Differential Revision: https://code.wildfiregames.com/D3910
This was SVN commit r25350.
This patch is increasing contrast of player colours used on minimap in
minimap component instead of changing player colours themselves to not
mess with other cases, when they are used.
Differential revision: D3242
Comments by: @vladislavbelov, @ValihrAnt, @Freagarach
This was SVN commit r25312.
Emplace does not replace existing element, insert_or_assign does.
While at it:
- Clean up the 'outdated' logic and reuse it for actors
- When an actor fails to load, return a placeholder. This improves
hotloading of broken actors, and makes Cunit behaviour more predictable.
- Some minor cleanup
Reported by: Stan
Fixes#6157
Differential Revision: https://code.wildfiregames.com/D3882
This was SVN commit r25308.
Essentially reverts D1918 / d592bf9cb6.
Instead of copying path requests to workers, setup the result vector,
then setup an index, and compute 'in-place'.
To send messages, the result vectors are read in order. This makes the
order trivially constant no matter how many workers there are, and the
architecture overall makes it much easier to efficiently paralellise.
Tested by: Langbart, Stan
Differential Revision: https://code.wildfiregames.com/D3849
This was SVN commit r25256.
This changes ParamNode to use UTF8 values internally (XMB files are UTF8
since cb9d0733ef).
This removes the need for a lot of conversions, speeding things up and
allows cleaning up the validator interface & a few other callsites.
ConstructJSVal could be a tad slower because of UTF8->16 conversions
within Spidermonkey; but the difference is unlikely to be noticeable in
practica.
Also:
- Changes `ToXML` to `ToXMLString` for clarity.
- Add a simple "op" test & show a particular behaviour of merge nodes
that I intend to change somewhat in D3830.
- Remove Component.h from simulation2 PCH - brought in too much.
Tested by: langbart
Differential Revision: https://code.wildfiregames.com/D3834
This was SVN commit r25228.
An actor file, as referenced by the VisualActor, can now define
different actors for different "quality level" setting.
In this initial version, the quality is handled directly by the object
manager.
Actor format impact:
- '<qualitylevels>' may be used as the root node, containing actor nodes
as children.
- such actor nodes can refer to a file, or to an inline actor, or
simply be inlined.
- such actor nodes may have a 'quality' attribute, specifying the
maximum quality level of this actor. By default, 255 (the maximum) is
implied.
- The actor format remains valid, but 'groups', 'variants', 'material',
'castshadow' and 'float' can be given a [minquality, maxquality[ range
via XML attributes. Outside of this range, the XML node is ignored
(making it possible to define, in a single actor file, several quality
levels).
Quality is a 0-255 value, with:
- Range 0-99 intended for lower level-of-detail actors (billboards,
etc.)
- Range 100-200 the 'normal' range for models. 100 is "low", 150
"medium", and 200 "high".
- Range 201-255 used for higher quality actors that might be used for
e.g. cinematics.
The range is wide to make it easier to add intermediate levels in the
future and it seemed easier given that an integer value of some kind was
required anyways.
Engine impacts:
- A new CActorDef class is introduced, wrapping an art/actors XML file
and its different quality levels. ObjectBase remains the definition of a
given 'actor', now at a given quality level.
- CActorDef imposes a maximal # of quality level for a particular actor
definition (5 currently).
- CUnit is made to refer to an Actor Definition explicitly, not a
particular ObjectBase.
- As a minor optimisation, variation keys are calculated on
pointer-to-sets-of-selections, instead of raw sets-of-selections, as
this reduces copying.
- some refactoring, including better const-correctness and hotloading
support via std::shared_ptr.
Differential Revision: https://code.wildfiregames.com/D3787
This was SVN commit r25210.
This basically does two things:
- Allow turrets on moving entities (fixes serialisation in cmpPos).
- Allow an entity to be present on another when the other is created.
That makes it basically a boiled down version of a prior patch, omitting
the part where orders could be passed on.
This does allow e.g. ranged units on chariots that fire while the
chariot moves.
Original diff by: @sanderd17
Redone by: @Stan
Differential revision: D1958
Comments by: @Alexandermb, @Angen, @bb, @Langbart, @Nescio, @Stan,
@wraitii
Refs. #2577 by implementing the entity on platform case.
This was SVN commit r25192.
The motion manager introduced in bae258f9a1 makes 'chasing' (e.g. an
entity targeting another entity, which also applies to fleeing)
behaviour symmetrical: both units see the initial state instead of it
being ID-dependent.
This allows removing hacks introduced in 6a66fb8205 (and refined in
7b88b1a0f9).
Differential Revision: https://code.wildfiregames.com/D3785
This was SVN commit r25185.
This implements a form of crowd movement that I've generally called
'unit pushing' in the last few years.
Essentially, any two units will push each other away when they're too
close. This makes it possible to ignore unit-unit obstructions, and thus
makes movement much smoother in crowds.
This first iteration of this system only allows pushing between idle
units and between moving units (i.e. a moving unit does not affect an
idle one).
This is because the unitMotion logic to detect it is stuck & needs to
use the pathfinders starts breaking: units can fail to move because they
are pushed away from their intended movement, and the current logic
fails to handle this gracefully.
Thankfully, the most value of this patch in terms of player experience
is found in the improvements to group movements and shuttling.
Other impacts:
- As the short pathfinder is called less often, we can increase the
starting search range & reduce the # of max turns, both improving
collision recovery.
- The performance of idle units is slightly worsened, as they must be
checked for idle-idle collisions. If needed a 'sleeping' system, as used
in physics engine, could be implemented.
- In general, however, expect slight performance improvements, as fewer
short paths are computed.
- Gathering efficiency should increase slightly, since shuttling times
are likely reduced slightly.
- As a sanity change to improve some edge cases (units that say they're
moving, i.e. pushable, but don't actually move), the 'going straight'
logic is turned off if a short path has been computed. This requires a
few cascading changes to work correctly.
Technical notes:
- To reduce the cost of the n^2 comparisons that pushing requires, units
are only compared within a small square on a grid which is lazily
reconstructed each turn. The overhead seems rather small, and this is
much simpler than keeping an up-to-date grid.
- The design is intended to be parallelisable if needed someday.
- The pathfinder's CheckMovement ignores moving units in UnitMotion, as
that is now the spec. Idle units are not ignored, which is required for
the 'collision' detection to work correctly (see above).
Refs #3442 (not fixed - idle units are not pushed by moving units).
Fixes#5084 (the overlap can still happen, but units will push each
other away).
Differential Revision: https://code.wildfiregames.com/D1490
This was SVN commit r25182.
d8ea401a95 replaced the ExploreTerritories logic, but I did not account
for the territory grid being N cells wide when the LOS is N+1.
Therefore, we could get out of bounds.
Reported by: Vladislavbelov
Differential Revision: https://code.wildfiregames.com/D3765
This was SVN commit r25161.
9d82ae15af introduced logic to extend the search range of the short
pathfinder in some situations. This extension was unbounded, resulting
occasionally in search domains several hundred meters wide, and path
computation that can take several seconds.
Reported by: Vico (on the forums).
Differential Revision: https://code.wildfiregames.com/D3760
This was SVN commit r25150.
Following bae258f9a1, all units moved, then all messages were sent. This
could result in units overlapping, which cannot be resolved without unit
pushing. Fixing this makes for a fairer comparison with the pushing
diff, so it seems worthwhile.
Differential Revision: https://code.wildfiregames.com/D3746
This was SVN commit r25126.
bae258f9a1 implemented CCmpUnitMotionManager, which handles motion for
CCmpUnitMotion (as distinct from ICmpUnitMotion, the interface).
The tight coupling between these two components was awkward at the
interface level, leaking underlying implementation details.
This diff makes CmpUnitMotionManager explicitly manage CmpUnitMotion,
instead of any implementation of ICmpUnitMotion, and moves files around
as requir
ed.
This:
- Makes it impossible to accidentally try to have the wrong
IID_UnitMotion managed by the UnitMotionManager.
- Allows devirtualising the calls from the manager to UnitMotion itself
(and inlining, as they are compiled in the same TU).
- Cleans up the manager interface - MotionState is now part of
CCmpUnitMotionManager.
- Cleans up ICmpUnitMotion interface - no need to provide a private
interface for the manager.
Differential Revision: https://code.wildfiregames.com/D3732
This was SVN commit r25125.
This is the same commit as 4bb31f084e, reverted in 5d1899785a. Noted
issues were fixed.
Partial revert/fix of 2f19cf86d3 and 2567fee329.
Before this diff, it was possible for a mod containing a cache/ or a
config/ folder to get written to incorrectly.
The issue is VFS can map multiple directories to one 'virtual' path, for
reading mods. However, writing data is problematic: which path to
choose?
The only viable solution is to use a path relative to the highest
priority directory encountered in the VFS path, or write paths could be
'hijacked' by lower-priority mods.
This fixes these issues by:
- Adding a new lookup mode ('Real-path') that explicitly picks the real
path relative to the highest-priority subdirectory in the VFS Path.
- Preventing overwriting a real directory with a lower priority one in
general.
- Revert c0c8132dd4's GetRealPath change, re-introducing the function as
GetOriginalPath.
This also cleans up some duplication that led to empty mod folders in
the user mod path, and cleans up loading the 'user' mod.
It also makes it explicit that a directory must be passed to Mount().
Note that the new 'realpath' lookup can still be somewhat complex with
many mount points at various hierarchy levels, but it is at least
predictable/deterministic without having to be careful about populating
order.
Fixes#2553
Differential Revision: https://code.wildfiregames.com/D3728
This was SVN commit r25107.
Partial revert/fix of 2f19cf86d3 and 2567fee329.
Before this diff, it was possible for a mod containing a cache/ or a
config/ folder to get written to incorrectly.
The issue is VFS can map multiple directories to one 'virtual' path, for
reading mods. However, writing data is problematic: which path to
choose?
The only viable solution is to use a path relative to the highest
priority directory encountered in the VFS path, or write paths could be
'hijacked' by lower-priority mods.
This fixes these issues by:
- Adding a new lookup mode ('Real-path') that explicitly picks the real
path relative to the highest-priority subdirectory in the VFS Path.
- Preventing overwriting a real directory with a lower priority one in
general.
- Revert c0c8132dd4's GetRealPath change, re-introducing the function as
GetOriginalPath.
This also cleans up some duplication that led to empty mod folders in
the user mod path, and cleans up loading the 'user' mod.
Note that the new 'realpath' lookup can still be somewhat complex with
many mount points at various hierarchy levels, but it is at least
predictable/deterministic without having to be careful about populating
order.
Fixes#2553
Differential Revision: https://code.wildfiregames.com/D3217
This was SVN commit r25104.
Fixes bae258f9a1.
As reported by Freagarach, garrisoned units trigger error messages.
As reported by Vladislavbelov, noPCH was broken & there were some style
issues.
Differential Revision: https://code.wildfiregames.com/D3707
This was SVN commit r25078.
This new MotionManager handles movement for UnitMotion components (not
UnitMotionFlying).
This is a first step towards unit pushing, by giving a central place for
the relevant units to collide.
One important side-effect is that movement is effectively synchronous -
the positions are not actually updated until all units have moved for a
turn (refs 6a66fb8205).
As a side-effect, it's an optimisation: fewer messages are being sent
overall, which leads to a slight speedup (negligible without a lot of
units though).
This is a first step - ideally, the movement functions called from
UnitMotionManager would actually be moved there.
Differential Revision: https://code.wildfiregames.com/D3509
This was SVN commit r25071.
Fixes a1dc9cadd8: if the speed doesn't change, UnitMotion doesn't update
the visual actor. Unfortunately, if another component has in the
meantime reset the animation to 'Idle', the unit will now move while
Idle. This can happen when leaving formation to do something else,
though it'srare.
This fixes that by instead always calling VisualActor, which does its
own checking to avoid redundancy. It's a bit less efficient, but not too
much.
Note that this relies on UnitMotion::UpdateMovementState being called
after any UnitAI code that could reset the animation to IDLE.
Differential Revision: https://code.wildfiregames.com/D3619
This was SVN commit r25011.
