Avoid cases of filenames
Update years in terms and other legal(ish) documents
Don't update years in license headers, since change is not meaningful
Will add linter rule in seperate commit
Happy recompiling everyone!
Original Patch By: Nescio
Comment By: Gallaecio
Differential Revision: D2620
This was SVN commit r27786.
Fixes 5de50c447c
Changing the passability class at runtime breaks some UnitMotion
assumptions in unrecoverable ways and will lead to units getting into
impassable terrain.
Formation controllers can tolerate it since units still check their own
obstruction.
Until some code is added to recover from the above bad case,
de-activated changing passability class for non-formation controllers.
This also fixes serialization issues related to clearance & passability
classes following that diff.
Reviewed By: Freagarach
Differential Revision: https://code.wildfiregames.com/D4629
This was SVN commit r26865.
This makes it possible to make units heavier, which both push more & get
pushed less by other units.
In particular, the diff does it for siege units & elephants.
This improves movement for these units in crowd situation, since they
will now basically not move when other regular units push into them.
Supported By: asterix, marder
Refs #6127
Differential Revision: https://code.wildfiregames.com/D4452
This was SVN commit r26275.
6581796103 removed the ability for terrain to affect movement speed. The
JPS pathfinder cannot support it, and the approach was poor anyways,
coupling rendering data with simulation data.
This lets us remove the dependency on CTerrainTextureManager everywhere.
Tested by: langbart
Differential Revision: https://code.wildfiregames.com/D4459
This was SVN commit r26269.
The main change is the introduction of a 'pushing pressure' counter on
units. This counter increases when units get pushed around, and
decreases over time. In essence, units under high pressure move slower &
are harder to push around.
The major effect is that units can now get bogged down when very dense
groups start colliding. This makes movement more realistic, makes unit
movement more 'chokepointy', and generally improves the mathematical
soundness of the system (lower values are easier to handle for our 200ms
turns).
Other changes:
- The logic to detect units crossing each other's path has been
reworked. Units that run towards each other should not more obviously
avoid each other.
- New parameters: 'Spread' is a measure of how strong the pushing effect
is based on distance. With the current settings, static-pushing is
rather 'on/off', whereas moving-pushing is more gradual (and thus the
max influence distance was increased when moving).
- Default values have been tweaked for lower overlap.
- Units only looked at other units within their grid region. This led to
overlap near grid-borders. Units now look at neighboring grid elements,
which largely removes this issue. While this may be slower, the
performance of pushing was largely negligible before, so it is unlikely
to become a main cause of lag (and overlap was generally disliked by
players).
- Units no longer orient in the direction of pushing, but instead keep
facing their target. This can look slightly odd under very heavy pushing
forces, but vastly improves behaviour of very slow units such as rams
(since they spend much less time turning around). As a side-effect,
clean up angle code following acc780bcbb .
Engine changes:
- Add a debug rendering mode at compile-time to help understand what is
happening.
- Make it possible to constexpr initialise fractional fixed numbers by
using FromFraction
The 'pressure' change was inspired by alre's suggestion at
https://wildfiregames.com/forum/topic/56436-for-a-better-unit-movement/#comment-461987
Refs #6127
Differential Revision: https://code.wildfiregames.com/D4439
This was SVN commit r26245.
I think there is a small mismatch between CheckMovement & the vertex
pathfinder when computing passability because one is ray-based and the
other just uses edges. However, it's out of my reach to fix it for now.
This can lead to units being stuck near building edges occasionally.
This introduces an un-intrusive recovery strategy (aka a hack) in
HandleObstructedMove that should get the units unstuck.
Should fix#6114 (to a sufficient extent anyways)
Differential Revision: https://code.wildfiregames.com/D4162
This was SVN commit r25786.
Introduced in 40cbde1925
MoveToFormationOffset may be called after the formation controller is
reset, leading to issues. It seems best to trust only
SetMemberOfFormation.
This causes the speed glitch experienced by wow & Valihrant.
Differential Revision: https://code.wildfiregames.com/D4128
This was SVN commit r25747.
This overall decreases the deathball effect from units walking to each
other a bit.
- Fix formations - this cleans up a UnitMotion hack for formations,
making it possible to increase pushing ranges without breaking closely
knit formations like testudo.
- Make MINIMAL_PUSHING and the MOVE_EXTENSION configurable, and add a
STATIC_EXTENSION as well.
- Increase the pushing range significantly, making units sparser.
Differential Revision: https://code.wildfiregames.com/D4098
This was SVN commit r25708.
Fixes 592453c62f
wasObstructed and wentStraight are not reset when Move() isn't called,
but PostMove may still be called (if the unit was pushed). This will
OOS.
Differential Revision: https://code.wildfiregames.com/D4088
This was SVN commit r25686.
TERRAIN_TILE_SIZE is now only used in relevant places in the simulation.
This also makes it mostly possible to use CFixed in constexpr contexts.
Refs #5566
Differential Revision: https://code.wildfiregames.com/D3078
This was SVN commit r25360.
This changes ParamNode to use UTF8 values internally (XMB files are UTF8
since cb9d0733ef).
This removes the need for a lot of conversions, speeding things up and
allows cleaning up the validator interface & a few other callsites.
ConstructJSVal could be a tad slower because of UTF8->16 conversions
within Spidermonkey; but the difference is unlikely to be noticeable in
practica.
Also:
- Changes `ToXML` to `ToXMLString` for clarity.
- Add a simple "op" test & show a particular behaviour of merge nodes
that I intend to change somewhat in D3830.
- Remove Component.h from simulation2 PCH - brought in too much.
Tested by: langbart
Differential Revision: https://code.wildfiregames.com/D3834
This was SVN commit r25228.
The motion manager introduced in bae258f9a1 makes 'chasing' (e.g. an
entity targeting another entity, which also applies to fleeing)
behaviour symmetrical: both units see the initial state instead of it
being ID-dependent.
This allows removing hacks introduced in 6a66fb8205 (and refined in
7b88b1a0f9).
Differential Revision: https://code.wildfiregames.com/D3785
This was SVN commit r25185.
This implements a form of crowd movement that I've generally called
'unit pushing' in the last few years.
Essentially, any two units will push each other away when they're too
close. This makes it possible to ignore unit-unit obstructions, and thus
makes movement much smoother in crowds.
This first iteration of this system only allows pushing between idle
units and between moving units (i.e. a moving unit does not affect an
idle one).
This is because the unitMotion logic to detect it is stuck & needs to
use the pathfinders starts breaking: units can fail to move because they
are pushed away from their intended movement, and the current logic
fails to handle this gracefully.
Thankfully, the most value of this patch in terms of player experience
is found in the improvements to group movements and shuttling.
Other impacts:
- As the short pathfinder is called less often, we can increase the
starting search range & reduce the # of max turns, both improving
collision recovery.
- The performance of idle units is slightly worsened, as they must be
checked for idle-idle collisions. If needed a 'sleeping' system, as used
in physics engine, could be implemented.
- In general, however, expect slight performance improvements, as fewer
short paths are computed.
- Gathering efficiency should increase slightly, since shuttling times
are likely reduced slightly.
- As a sanity change to improve some edge cases (units that say they're
moving, i.e. pushable, but don't actually move), the 'going straight'
logic is turned off if a short path has been computed. This requires a
few cascading changes to work correctly.
Technical notes:
- To reduce the cost of the n^2 comparisons that pushing requires, units
are only compared within a small square on a grid which is lazily
reconstructed each turn. The overhead seems rather small, and this is
much simpler than keeping an up-to-date grid.
- The design is intended to be parallelisable if needed someday.
- The pathfinder's CheckMovement ignores moving units in UnitMotion, as
that is now the spec. Idle units are not ignored, which is required for
the 'collision' detection to work correctly (see above).
Refs #3442 (not fixed - idle units are not pushed by moving units).
Fixes#5084 (the overlap can still happen, but units will push each
other away).
Differential Revision: https://code.wildfiregames.com/D1490
This was SVN commit r25182.
9d82ae15af introduced logic to extend the search range of the short
pathfinder in some situations. This extension was unbounded, resulting
occasionally in search domains several hundred meters wide, and path
computation that can take several seconds.
Reported by: Vico (on the forums).
Differential Revision: https://code.wildfiregames.com/D3760
This was SVN commit r25150.
bae258f9a1 implemented CCmpUnitMotionManager, which handles motion for
CCmpUnitMotion (as distinct from ICmpUnitMotion, the interface).
The tight coupling between these two components was awkward at the
interface level, leaking underlying implementation details.
This diff makes CmpUnitMotionManager explicitly manage CmpUnitMotion,
instead of any implementation of ICmpUnitMotion, and moves files around
as requir
ed.
This:
- Makes it impossible to accidentally try to have the wrong
IID_UnitMotion managed by the UnitMotionManager.
- Allows devirtualising the calls from the manager to UnitMotion itself
(and inlining, as they are compiled in the same TU).
- Cleans up the manager interface - MotionState is now part of
CCmpUnitMotionManager.
- Cleans up ICmpUnitMotion interface - no need to provide a private
interface for the manager.
Differential Revision: https://code.wildfiregames.com/D3732
This was SVN commit r25125.
2021-03-26 16:47:07 +00:00
Renamed from source/simulation2/components/CCmpUnitMotion.cpp (Browse further)
