Gimp/tools/pdbgen/pdb/selection.pdb

# The GIMP -- an image manipulation program
# Copyright (C) 1995 Spencer Kimball and Peter Mattis

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

# "Perlized" from C source by Manish Singh <yosh@gimp.org>

sub channel_arg () {{
    name => 'channel',
    type => 'channel',
    desc => 'The channel'
}}

sub operation_arg () {{
    name => 'operation',
    type => 'enum GimpChannelOps',
    desc => 'The selection operation: { %%desc%% }'
}}

sub coord_args {
    my ($name, $desc, $args) = @_;
    foreach (qw(x y)) {
	push @$args, { name => eval qq/"$name"/, type => 'int32',
		       desc => eval qq/"$desc"/ }
    }
}

sub selection_simple_proc {
    my $op = shift;

    &std_pdb_misc;

    @inargs = ( &std_image_arg );

    %invoke = ( code => "gimp_channel_$op (gimp_image_get_mask (gimage), TRUE);" );
}

sub selection_change_proc {
    my ($op, $arg, $type, $edge_lock) = @_;

    $blurb = "\u$op the image's selection";

    $help = "This procedure ${op}s the selection. ";

    &std_pdb_misc;

    @inargs = (
	&std_image_arg,
	{ name => $arg, type => "0 <= $type",
	  desc => "\u$arg of $op (in pixels)" }
    );

    %invoke = ( code => "gimp_channel_$op (gimp_image_get_mask (gimage), $arg, $arg$edge_lock, TRUE);" );
}

# The defs

sub selection_bounds {
    $blurb = 'Find the bounding box of the current selection.';

    $help = <<'HELP';
This procedure returns whether there is a selection for the specified image. If
there is one, the upper left and lower right corners of the bounding box are
returned. These coordinates are relative to the image. Please note that the
pixel specified by the lower righthand coordinate of the bounding box is not
part of the selection. The selection ends at the upper left corner of this
pixel. This means the width of the selection can be calculated as (x2 - x1),
its height as (y2 - y1).
HELP

    &std_pdb_misc;

    @inargs = ( &std_image_arg );

    @outargs = (
	{ name => 'non_empty', type => 'boolean', void_ret => 1,
	  desc => 'True if there is a selection', init => 1 }
    );

    my $count = 1;
    foreach ('upper left', 'lower right') {
	&coord_args("\${_}$count",
		    "\$_ coordinate of $_ corner of selection bounds",
		    \@outargs);
	$count++;
    }

    %invoke = (
	code => 'non_empty = gimp_channel_bounds (gimp_image_get_mask (gimage), &x1, &y1, &x2, &y2);'
    );
}

sub selection_value {
    $blurb = 'Find the value of the selection at the specified coordinates.';

    $help = <<'HELP';
This procedure returns the value of the selection at the specified coordinates.
If the coordinates lie out of bounds, 0 is returned.
HELP

    &std_pdb_misc;

    @inargs = ( &std_image_arg );
    &coord_args('$_', '$_ coordinate of value', \@inargs);

    @outargs = (
	{ name => 'value', type => '0 <= int32 <= 255',
	  desc => 'Value of the selection: (%%desc%%)',
	  alias => 'gimp_channel_value (gimp_image_get_mask (gimage), x, y)',
          no_declare => 1 }
    );
}

sub selection_is_empty {
    $blurb = 'Determine whether the selection is empty.';

    $help = <<'HELP';
This procedure returns non-zero if the selection for the specified image is not
empty.
HELP

    &std_pdb_misc;

    @inargs = ( &std_image_arg);

    @outargs = (
	{ name => 'is_empty', type => 'boolean',
	  desc => 'Is the selection empty?',
	  alias => 'gimp_channel_is_empty (gimp_image_get_mask (gimage))',
          no_declare => 1 }
    );
}

sub selection_translate {
    $blurb = 'Translate the selection by the specified offsets.';

    $help = <<'HELP';
This procedure actually translates the selection for the specified image by the
specified offsets. Regions that are translated from beyond the bounds of the
image are set to empty. Valid regions of the selection which are translated
beyond the bounds of the image because of this call are lost.
HELP

    &std_pdb_misc;

    @inargs = ( &std_image_arg );
    &coord_args('off$_', '$_ offset for translation', \@inargs);

    %invoke = ( code => 'gimp_item_translate (GIMP_ITEM (gimp_image_get_mask (gimage)), offx, offy, TRUE);' );
}

sub selection_float {
    $blurb = <<'BLURB';
Float the selection from the specified drawable with initial offsets as
specified.
BLURB

    $help = <<'HELP';
This procedure determines the region of the specified drawable that lies
beneath the current selection. The region is then cut from the drawable and the
resulting data is made into a new layer which is instantiated as a floating
selection. The offsets allow initial positioning of the new floating selection.
HELP

    &std_pdb_misc;

    @inargs = (
	{ name => 'drawable', type => 'drawable',
	  desc => 'The drawable from which to float selection' }
    );
    &coord_args('off$_', '$_ offset for translation', \@inargs);

    @outargs = (
	{ name => 'layer', type => 'layer', wrap => 1,
	  desc => 'The floated layer', init => 1 }
    );

    %invoke = (
	code => <<'CODE'
{
  GimpImage *gimage;

  gimage = gimp_item_get_image (GIMP_ITEM (drawable));
  layer = gimp_selection_float (gimp_image_get_mask (gimage),
                                drawable, TRUE, offx, offy);
  success = layer != NULL;
}
CODE
    );
}

sub selection_clear {
    $blurb = 'Set the selection to none, clearing all previous content.';

    $help = <<'HELP';
This procedure sets the selection mask to empty, assigning the value 0 to every
pixel in the selection channel.
HELP

    &std_pdb_misc;

    @inargs = ( &std_image_arg );

    %invoke = ( code => "gimp_channel_clear (gimp_image_get_mask (gimage), NULL, TRUE);" );
}

sub selection_invert {
    &selection_simple_proc('invert');

    $blurb = 'Invert the selection mask.';

    $help = <<'HELP';
This procedure inverts the selection mask. For every pixel in the selection
channel, its new value is calculated as (255 - old_value).
HELP
}

sub selection_sharpen {
    &selection_simple_proc('sharpen');

    $blurb = 'Sharpen the selection mask.';

    $help = <<'HELP';
This procedure sharpens the selection mask. For every pixel in the selection
channel, if the value is > 0, the new pixel is assigned a value of 255. This
removes any "anti-aliasing" that might exist in the selection mask's boundary.
HELP
}

sub selection_all {
    &selection_simple_proc('all');

    $blurb = 'Select all of the image.';

    $help = <<'HELP';
This procedure sets the selection mask to completely encompass the image. Every
pixel in the selection channel is set to 255.
HELP
}

sub selection_none {
    $blurb = 'Deselect the entire image.';

    $help = <<'HELP';
This procedure deselects the entire image. Every pixel in the selection channel
is set to 0.
HELP

    &std_pdb_misc;

    @inargs = ( &std_image_arg );

    %invoke = ( code => "gimp_channel_clear (gimp_image_get_mask (gimage), NULL, TRUE);" );
}

sub selection_feather {
    &selection_change_proc('feather', 'radius', 'float', '');

    $help .= 'Feathering is implemented using a gaussian blur.';
}

sub selection_border {
    &selection_change_proc('border', 'radius', 'int32', '');

    $help .= <<'HELP';
Bordering creates a new selection which is defined along the boundary of the
previous selection at every point within the specified radius.
HELP
}

sub selection_grow {
    &selection_change_proc('grow', 'steps', 'int32', '');

    $help .= <<'HELP';
Growing involves expanding the boundary in all directions by the specified
pixel amount.
HELP
}

sub selection_shrink {
    &selection_change_proc('shrink', 'radius', 'int32', ', FALSE');

    $help .= <<'HELP';
Shrinking invovles trimming the existing selection boundary on all sides by the
specified number of pixels.
HELP
}

sub selection_layer_alpha {
    $blurb = <<'BLURB';
Transfer the specified layer's alpha channel to the selection mask.
BLURB

    $help = <<'HELP';
This procedure requires a layer with an alpha channel. The alpha channel
information is used to create a selection mask such that for any pixel in the
image defined in the specified layer, that layer pixel's alpha value is
transferred to the selection mask. If the layer is undefined at a particular
image pixel, the associated selection mask value is set to 0.
HELP

    &std_pdb_misc;

    @inargs = (
	{ name => 'layer', type => 'layer',
	  desc => 'Layer with alpha' }
    );

    %invoke = (
	vars => [ 'GimpImage *gimage' ],
	code => <<'CODE'
{
  gimage = gimp_item_get_image (GIMP_ITEM (layer));
  gimp_channel_select_alpha (gimp_image_get_mask (gimage), layer,
                             GIMP_CHANNEL_OP_REPLACE, FALSE, 0.0, 0.0);
}
CODE
    );
}

sub selection_load {
    $blurb = 'Transfer the specified channel to the selection mask.';

    $help = <<'HELP';
This procedure loads the specified channel into the selection mask.
HELP

    &std_pdb_misc;

    @inargs = ( &channel_arg );

    %invoke = (
	code => <<'CODE'
{
  GimpImage *gimage;
  gint       off_x, off_y;

  gimage = gimp_item_get_image (GIMP_ITEM (channel));
  gimp_item_offsets (GIMP_ITEM (channel), &off_x, &off_y);

  gimp_channel_select_channel (gimp_image_get_mask (gimage),
                               _("Channel to Selection"),
                               channel, 
                               off_x, off_y,
                               GIMP_CHANNEL_OP_REPLACE,
                               FALSE, 0.0, 0.0);
}
CODE
    );
}

sub selection_combine {
    $blurb = 'Combines the specified channel with the selection mask.';

    $help = <<'HELP';
This procedure combines the specified channel into the selection mask.
HELP

    &std_pdb_misc;

    @inargs = ( &channel_arg, &operation_arg );
	       
    %invoke = (
	code => <<'CODE'
{
  GimpImage *gimage;
  gint       off_x, off_y;

  gimage = gimp_item_get_image (GIMP_ITEM (channel));
  gimp_item_offsets (GIMP_ITEM (channel), &off_x, &off_y);

  gimp_channel_select_channel (gimp_image_get_mask (gimage),
                               _("Channel to Selection"),
                               channel, 
                               off_x, off_y,
                               operation,
                               FALSE, 0.0, 0.0);
}
CODE
    );
}

sub selection_save {
    $blurb = 'Copy the selection mask to a new channel.';

    $help = <<'HELP';
This procedure copies the selection mask and stores the content in a new
channel. The new channel is automatically inserted into the image's list of
channels.
HELP

    &std_pdb_misc;

    @inargs = ( &std_image_arg );

    @outargs = (
	{ name => 'channel', type => 'channel',
	  desc => 'The new channel', init => 1 }
    );

    %invoke = (
        headers => [qw("core/gimpselection.h") ],
	code => 'success = (channel = gimp_selection_save (gimp_image_get_mask (gimage))) != NULL;'
    );
}

@headers = qw("core/gimpchannel-select.h" "gimp-intl.h");

@procs = qw(selection_bounds selection_value selection_is_empty
	    selection_translate selection_float selection_clear
	    selection_invert selection_sharpen selection_all selection_none
	    selection_feather selection_border selection_grow selection_shrink
	    selection_layer_alpha selection_load selection_save
	    selection_combine);
%exports = (app => [@procs], lib => [@procs]);

$desc = 'Image mask';

1;