GimpDeviceInfo is the only way to store per-device settings like
color, brush etc. It used to be derived from GimpContext and therefore
limited to the context's properties, causing everything else (all
tool-individual options) to be lost on device change.
Derive it from GimpToolPreset instead, so it's capable of storing
arbitrary tool options.
Adapt things to the new class hierarchy and add a bunch of signal
handlers that make sure the active device's GimpDeviceInfo is updated
properly when the tool changes. Also change device switching
accordingly.
Change GimpDeviceStatus to only show the stuff that is relevant to
each device's tool.
And various small changes to make things work properly...
We get a lot of packaging bugs for third-party builds in our tracker,
especially since our debug tool now opens directly our bug tracker.
It would be preferred if third-party packagers were to make a first
filtering of bugs and only reported once they knew for sure that the bug
is in core code, and not in packaging.
Our configure script will now propose a --with-bug-report-url option
allowing to set a different web address. This address will be the one
opening in the debug dialog.
In gimp_histogram_editor_validate(), clear the update timeout, so
that if we validate the histogram before the timeout (in
particular, if editor->histogram itself is clear) we don't end up
unnecessarily re-validating it at the timeout.
In GimpHistogramView, connect the view to the bg-histogram's
"notify" signal, and update the view in response. Previously, we
only updated the view in response to the main histogram's "notify"
signal.
The curves tool only uses the bg-histogram, and after the switch to
asynchronous histogram calculation, in commit
49382e53d5, it failed to update the
histogram view after the calculation was complete.
In GimpHistogramEditor, calculate the histogram of the active
drawable asynchronously, rather than synchronously, to avoid
blocking the UI (and the execution of PDB calls) while the
histogram is calculated. For large images, this can notably
improve responsiveness, as well as plug-in execution speed, while
the histogram dialog is mapped.
Displays can be opened multiple times, which caused the device manager
to try to add their devices multiple times (which gets prevented with
warnings), and then remove the devices prematurely when the
multiple-opened display gets closed the first time (which is even
worse).
Add a simple hash that keeps track of how often displays are open, and
only add/remove their devices on first open and last close.
This actually happened with gtk-inspector on the gtk3-port branch, but
there is no reason this can't also happen in stable.
gimp_histogram_view_draw_spike(): we were shifting the bg_histogram to
the right by accidentially offsetting the 'i' variable, use a local
variable for the loop instead.
... while the container is frozen
In GimpContainerView, do nothing in response to a
gimp_container_view_{select,activate,context}_item() call while the
view's container is frozen. While the container is frozen the view
is empty, and these functions can segfault.
it used to be "text" which is almost always too extreme; use "text_aa"
instead which is half way between "text" and "base" and always gives a
reasonable contrast.
First WIP commit, adds:
- enum GimpGradientBlendColorSpace { RGB_PERCEPTUAL, RGB_LINEAR }
- linear blending mode for gradient segments
- tool options GUI for the blend and paint tools which use gradients
Last commit caused -xobjective-c to be passed during linking on
Mac, causing object files to be treated as source files. Add a
-xnone flag to AM_LDFLAGS, canceling the effect of -xobjective-c.
Additinally, add a -xobjective-c++ flag to AM_CXXFLAGS, so that we
can use Objective-C in C++ files on Mac, if we ever need to.
On Mac, pass -xobjective-c to the compiler through AM_CFLAGS, not
AM_CPPFLAGS, so that it's only used for C sources, and not C++
sources. In the latter case, it clashes with the -std=... flag,
spewing an error. Thanks, Partha :)
Commit fd6d4931c8 accidentally
introduced a bug that caused Wilber's eyes to misbehave. This
commit is an attempt to fix this issue. Unfortunately, it seems
like the bug can still be triggered through a certain sequence of
actions...
Add "ellipsize" property to GimpColorFrame and set it to
PANGO_ELLIPSIZE_END in the the pointer information dockable.
Better cut off long numbers than make them expand the dock.
Add signal GimpTextBuffer::color-applied which is emitted when text is
inserted or when color is applied to a span of text.
In GimpTextTool, connect to the signal and update the global color
history.
Unrelated: rename gimp_text_tag_get_color() to get_fg_color() and add
boolean return values to get_fg_color() and get_fg_color() which
indicates if a color is set on the tag at all. This ended up unneeded
in the fix but is an improvement regardless.
Move the button-highlight update to its own function, and call it
when the active image changes, as well as when its floating
selection changes.
Call the floating-selection-changed signal handler when the active
image changes, so that we correctly update its row's attributes.
We disallow creating a new layer from a floating selection when its
associated drawable is a channel, so there's no point in
highlighting the "new layer" button in this case. Note that the
"layers-new" action remains sensitive, showing an error message if
activated. Not sure if it's a good thing or not, but whatever.
... when there's a floating selection
Layer-dialog interaction is restricted while the image has a
floating selection, which often causes confusion. Highlight the
three layers-dialog buttons that "finalize" a floating selection --
the "new layer" button, the "anchor layer" button, and the "delete
layer" button -- to indicate that these buttons are used to finish
the paste operation. The "new" and "anchor" buttons use a green
highlight color, while the "delete" button uses a red highlight
color.
The bug is very hard to reproduce, probably because it requires specific
timing conditions but this looks like this commit would prevent it.
Apparently the signal handler gimp_container_view_name_changed() may
have been run while the container view (set as user data) was most
likely already finalized, hence leaving an invalid dangling pointer.
Let's just make sure we disconnect this handler (and another) when we
finalize the container view and its private data.
Having to sync the "valid" flag with the presence of a histogram is
error-prone (cf. previous commit).
Instead gimp_histogram_editor_validate() return value will just depend
on the presence of the histogram. And "valid" becomes "recompute", i.e.
a flag to request for "recomputation" of the histogram.
When the histogram is freed, we need to set valid to FALSE, in order to
force recreation as soon as needed. Otherwise we may hit some race
condition of trying to work with a NULL histogram. For instance this
happened when starting painting fast enough after switching the active
image.
The current sorting logic of actions in the history is essentially
linear, so that when an action is activated it moves up one place
in the history. This has the undesirable effect that actions take
very long to climb up the history list, as well as that actions at
the top of the list can change their relative order too frequently.
Improve the sorting logic, such that items climb up the list
faster, while top items retain their relative position longer. See
the comment at the top of the diff for the actual logic.
The undo/redo actions' label changes based on context, and may
interfere with the labels of more relevant, but less frequent,
actions.
For example, after applying filter Foo, the label of edit-undo
becomes "Undo Foo", so searching for "Foo" results in both
edit-undo, and the action referring to the filter, with edit-undo
most likely appearing at the top of the list due to its frequency.
Excluding the undo/redo actions from the history is a simple, if
suboptimal, way to fix this.
... and rename gimp_action_history_excluded_action() to
gimp_action_history_is_excluded_action().
is_blacklisted_action() determines whether an action should be
excluded from *both* the history and the search results, while
is_excluded_action() determines if an action should be excluded
only from the history. This eliminates some redundancy across
gimpaction-history and action-search-dialog.
Since a few commits, I don't generate the traces anymore in errors.c but
delay this to gui-message.c and rely on the message severity to decide
whether or not generating traces.
Unfortunately none of the current severities are properly describing
this new type of messages. Even GIMP_MESSAGE_ERROR is used everywhere in
our code NOT for actual programming bug, but often for data errors
(which are not bugs but proper messages and should obviously not prompt
a debug trace).
Slight back step from commit 34fe992f44. I don't keep track anymore of
the number of errors inside GimpCriticalDialog. The problem is that GTK+
calls must happen in the main thread, and errors in another thread will
be delayed into the main thread through gdk_threads_add_idle_full().
This makes any backtrace generated as a consequence of a threaded error
useless (in particular any error happening in GEGL since we always
process these as multi-threaded, whether they are or not).
Instead I now keep track of the number of errors in gui-message.c, which
still allows to reset the counters when the unique debug dialog is
closed. Therefore I can now generate backtraces conditionally to the
error counters inside the problematic thread (and right when the error
happened), without any GTK+ call.
This finally makes GEGL backtraces useful in the debug dialog! :-)
We don't want an infinite number of traces because it takes some time to
get. Until now I was keeping track of traces in app/errors.c, but that
was very sucky because then I was limiting traces per session. Instead
save them as a variable of a GimpCriticalDialog instance. Therefore only
generate the traces for WARNING/CRITICAL at the last second, when
calling the dialog.
When too many traces are displayed, just fallback to just add error
messages only. But then even errors without traces can be time-consuming
(if you have dozens of thousands of errors in a few seconds, as I had
the other day, updating the dialog for all of them would just freeze the
whole application for a long time).
So also keep track of errors as well and as last fallback, just send the
remaining errors to the stderr.
which is just a #define to g_assert for now, but can now easily be
turned into something that does some nicer debugging using our new
stack trace infrastructure. This commit also reverts all constructed()
functions to use assert again.
When removing a GimpContainerTreeStore item, make sure that editing
of corresponding tree-view rows is canceled first, by emitting a
"row-changed" signal. Otherwise, we can run into trouble when
removing an item that is being edited.
I was directed by Massimo to some bug which was repeatedly generating
dozens of thousands of GEGL WARNINGs and that was completely taking over
the GUI if redirected to GimpErrorDialog. Currently GEGL warnings are
not redirected there, but the problem is still there, and we don't want
GIMP warnings to freeze the whole GUI either.
So only increment the repeat variable upon gimp_message_box_repeat() and
delay actual GUI update to a later low-priority idle function.
I actually think the buttons were translatable, but the strings were
simply not auto-extracted with previous code (which is nearly the same
in the end). Should be better now.
Since commit 9fdf35550b, I removed the GIMP_APP_GLUE_COMPILATION check
because we need to have the whole versioning info from the new debug
widget. It just makes sense to go further and just make this a proper
internal API to get version information.
This is obviously not possible anymore to do this manually so this step
is bogus in a crash case. We keep this step for other (non-fatal)
errors. We may add an automatic "attempt" to save in a backup file
later, which may not work depending on how bad the crash is (which is
why it will be done in a backup file, we don't want to corrupt saved
files).
It was previously untested, hence as expected needed fixes. First I add
our own exception handler using Win32 API SetUnhandledExceptionFilter().
Second, I reorder things so that ExcHndlInit() is run after this setter,
since they will be executed as a FILO and we need backtraces to be
generated before our separate GUI runs. Last I run the backtrace GUI as
async. No need to keep the main GIMP waiting since the traces have
already been generated into a separate file.
Also replace gtk_show_uri() by the implementation taken straight from
our web-browser plug-in, since apparently gtk_show_uri() doesn't work in
Windows (and probably not macOS either since I see we have a separate
implementation for this platform as well). I would like to be able to
use the PDB but can't because this code needs to be usable both within
the main process and into a separate tool process. Ideally, this should
just be a utils function which could be included without a problem.
* Type pid_t is not cross-platform. Just use int instead, and convert it
to respective type on each platform.
* Get rid of several useless include which should have been removed a
few commits ago, when I reimplemented the backtrace function.
* Better handle the various macros in gimp_eek() (between G_OS_WIN32,
HAVE_EXCHNDL and GIMP_CONSOLE_COMPILATION, but also no_interface and
generate_backtrace options, that was a bit messy).
* Make gimpdebug now always built, whatever the platform.
This was a bit harder since even though we handle fatal signals,
allowing us to do any last action before GIMP crashes, it seems more
memory allocation is not allowed at this time. So creating a dialog or
simply getting the return output of gdb into the main process is not
allowed. What I do instead is running a separate program (gimpdebug)
which will take care of creating the new dialog and running a debugger.
I still use GimpCriticalDialog code from this separate binary, while I
continue to use this widget also within GIMP for non-fatal errors. The
reason why we still want to use it within GIMP is that we can bundle
several non-fatal errors and backtrace this way (fatal errors don't
return anyway) and it's easier to do so when created from the main
process.
GIMP will now try to get a backtrace (on Unix machines only for now,
using g_on_error_stack_trace(); for Windows, we will likely have to look
into DrMinGW).
This is now applied to CRITICAL errors only, which usually means major
bugs but are currently mostly hidden unless you run GIMP in terminal. We
limit to 3 backtraces, because many CRITICAL typically get into domino
effect and cause more CRITICALs (for instance when a g_return*_if_fail()
returns too early).
The CPU group monitors GIMP's CPU usage, and can measure the amount
of time the CPU has been active, which can be used to get a rough
estimate of the execution time of certain operations.
Be warned: while the CPU group is available on *nix and Windows, it
has only been tested on Linux.
Allow controlling the gauge/history visibility, and the history
interpolation method, of individual values.
Improve redraw elision when some values are hidden.
The four remaining "classic" color tools (Brightness-Contrast, Curves,
Levels and Threshold) are in fact just special UIs for otherwise
completely normal filter ops.
Add normal filter actions for them and invoke them like all
other filters, which makes them show up in the filter history
automatically.
The only small hack needed is to special case them in
gimp_gegl_procedure_execute_async() so the right tools are created
instead of the default GimpOperationTool. Also, blacklist the
automatically generated tools actions from action search and the
shortcut editor.
gimp_action_history_init(): when deserializing the action history,
check each action against gimp_action_history_excluded_action() so
when we decide to exclude an action, it doesn't come back as history
zombie from disk.
...on the list dialogs on the Input text area
gimp_container_editor_constructed(): connect the container
view's "select-item" with G_CONNECT_AFTER because the signal
is G_SIGNAL_RUN_LAST. Some quick greps didn't find anything that
would be affected, except fixing this bug. Found by Massimo.
Looks like we should use L*, C*, and h° to stay consistent (in
particular Lab L* and LCH L* are the same value), and also to allow for
future implementation of variants of LCH.
Value "h°" was the hardest to choose since we sometimes see just "h",
sometimes with a star, and other times with a degree. Even reference
documents display the 3 versions in the same documents! I just went with
a 2-letter version with degree, as seen on Wikipedia, and to align
better with other 2-letter LCh values. That's pretty arbitrary and can
be changed if another shortened name is considered better.
Elle Stone says (cf. bug 791484, comment 9):
> there are several variants of "Lab" out there, with the most commonly
> used (and the version GIMP currently uses) being the 1976 version,
> which uses asterisks to differentiate it from the earlier "Hunter"
> version. So yes, asterisks are technically correct.
Better use the most conventional naming. And as a side effect, it makes
differentiating Lab a* and Alpha shortened names more obvious, while not
making them that much bigger (2 characters instead of one for "a*").
To mark them as different strings with a context, otherwise "B" for Blue
and "B" for Lab b* cannot be translated separately (for instance).
See commit 7ac7b9519f and previous commit.
These labels were shortened but it's difficult for translators to know
what they are, especially when same shortened labels are common to
different concepts.
See commit 7ac7b9519f.
Add "color-profile-path" to GimpDialogConfig to remember the last-used
path in any profile chooser dialog.
Whenever a GimpColorProfileChooserDialog is created, call a new
gimpwidgets-utils helper function that connects to the dialog's "show"
and "response" signals and makes sure "color-profile-path" is set on
the dialog if it doesn't have a current folder already, and sets the
property back to the config object when a profile was actually chosen
from disk.
...to allow more space for the channel values
to allow the Pointer, Sample Points, and Color Picker Information
dialogs to be narrower and still show the channel value, without the
channel value running over the top of the channel identifier.
Mitch: did even more and also split the coordinates display to two
lines, because on large images the widget's width was flickering
or the labels were overwriting each other.
Refactor GimpDashboard to autogenerate the UI based on a
description of the different variables, fields, and groups.
Allow individual groups to be expanded/collapsed, and individual
fields to be enabled/disabled. Save the relevant state in the
dashboard's aux-info.
Add fields for the new GeglStats properties, as per GEGL commit
25c39ce6c9bb618f06ac96d118e624be66464d74. The new fields are not
enabled by default.
Add "reset" action, to clear the history, and reset cumulative
data.
The dashboard dockable shows the current GEGL cache and swap sizes,
and their recent history. It has options to control the update
rate and history duration of the data, and an option to warn (by
raising/blinking the dialog) when the swap size approaches its
limit.
GimpMeter visualizes a set of values that change over time. It
consists of a gauge, showing the most-recent sampled values, a
history graph, showing a plot of the values over time, and an LED,
which can be used as a boolean indicator for some condition.
GimpMeter is used in the dashboard dockable, added in the next
commit.
It turns out we already have the support since it uses the same axis as
the "wheel", used by other devices (for instance the Airbrush pen of
Wacom has a wheel reporting on this same axis).
We can't do any fancy support for this right now, but at least we can
clarify a bit the dynamics naming so that people understands it can be
used for both wheel and rotation input.
Fix the various "Wheel" dynamics strings into "Wheel/Rotation".
Add gimp_item_get_merged_color_tag(), which returns the color tag
of the nearest ancestor (including the current item) that has a
color tag other than NONE. Use this function in GimpItemTreeView,
instead of gimp_item_get_color_tag(), to set the cell color of
items, so that item's with a NONE color tag inherit the color of
their parent. Add a boolean "inherited" parameter to
gimp_get_color_tag_color(), which indicates if the color tag is the
item's actual color tag, or an inherited color tag, and modify the
returned color accordingly, so that inherited colors are less
saturated/lighter than non-inherited ones.
Update the dprod production of generated enum files to include
abbreviated value descriptions, as per the previous commits.
Add a comment for translators above the abbreviated descriptions,
specifying the full description they abbreviate.
Add "In Place" variants for all sorts of pasting:
- extend the GimpPasteType enum with IN_PLACE values
- add the needed actions and menu items
- merge the action callbacks into one, taking an enum value as parameter
- refactor the pasting code in gimp-edit.c into smaller functions
We probably have too menu items in the "Edit" menu now, needs to be
sorted out.
When a display filter's configure() function returns NULL, use a
propgui for the filter, instead of not showing a widget at all, to
spare filters the need to manually construct a configuration gui.
When applying a relative adjustment to a spin scale, don't wrap the
pointer around the corresponding screen edge if the spin scale's
value is already minimal/maximal.
While applying a relative spin scale adjusment (i.e., when dragging
from the lower half of the spin scale), wrap the pointer around the
screen edges (of the current monitor), so that the maximal possible
adjustment amount isn't artifically limited by the screen geometry.
This is especially useful for spin scales in dockables, since
dockables are normally placed near the edge of the screen.
When the mouse is released, move the pointer back to its initial
position (at the beginning of the drag), to allow for subsequent
adjustments.
Unfortunately, moving the pointer programatically isn't supported
on all envrionments (Wayland, Xephyr, ...), and worse yet,
detecting that the pointer failed to move is tricky, so we have to
resort to an ungly hack to maintain the current behavior in this
case. Gah :P
Small fix to last commit: make the name entry editable when the
data is renamable, even if it's not otherwise writable (completely
hypothetical for now.)
Make internal data objects non-renamable, even if they're writable,
through gimp_data_is_name_editable(). Currently, the only such
object is the custom gradient.
Prevent changing the name of non-renamable data by making the name
entry of GimpDataEditor non-editable whenever
gimp_viewable_is_name_editable() is FALSE, even if the data is
otherwise editable.
Prevent the vairous PDB -rename() functions from renaming non-
renamable data, by adding a GimpPDBDataAccess flags type,
specifying the desired access mode for the data -- any combination
of READ, WRITE, and RENAME -- and replacing the 'writable'
parameter of the gimp_pdb_get_foo() functions with an 'access'
parameter. Change the various .pdb files to use READ where they'd
used FALSE, and WRITE where they'd used TRUE; use RENAME, isntead
of WRITE, in the -rename() functions.
Keep track of the selected viewable of a GimpContainerEntry, and
update the entry text when the viewable's name changes, if the text
hasn't changed since the viewable was selected.
Currently, the error console is highlighted (shown/blinked) only
upon errors; however, warnings, which are not shown on the
statusbar while the error console is open, often also contain
important information.
Allow the user to configure which message types (errors, warnings,
and regular messages) highlight the error console, using a new
"highlight" submenu in the error-console menu. Add corresponding
config options, saved in sessionrc. By default, highlight the
error console unpon both errors and warnings.
gimp_dockable_blink() is used to attract the user's attention to a
specific dockable. Generalize this to arbitrary widgets, by
replacing gimp_dockable_blink[_cancel]() with
gimp_widget_blink[_cancel](), in gimpwidgets-utils.c.
The GTK+ implementation of gtk_drag_higlight(), used by
gimp_highlight_widget(), paints a black box around the widget,
which is not very noticable when using a dark theme. Copy the GTK+
code (which is simple enough) over to gimpwidgets-utils.c, and use
the widget's text color for the box instead.
When changing the layer-mode group in a GimpLayerModeComboBox, check
the new mode against the combo's context, and fall back to normal if
it's not applicable. This is necessary for the color-erase mode,
which has both a legacy and non-legacy variants. The former is
applicable for painting contexts, so we want to map the non-legacy
mode to it when changing groups, however, it's not applicable for
layer contexts, so, in this case, we want to map the non-legacy mode
to normal.
Add an "expanded-changed" signal to GimpViewable, which should be
emitted by subclasses when the viewable's expanded state changes.
Emit this signal when the expanded state of group layers changes.
Respond to this signal in GimpContainerView, by calling a new
expand_item() virtual function. Implement expand_item() in
GimpContainerTreeView, expanding or collapsing the item as
necessary.
When the mouse hovers over the upper or lower half of a spinscale,
highlight the corresponding area, to hint that the two halves
behave differently. This seems to cause a lot of confusion, so the
different cursors are apparently not enough :P
We use a low-opacity version of the current theme's text color for
the highlight, since it should have a good contrast to both the bar
color and the background color.
Increase the step and page increments of the brush radius spinscale
in the brush editor to 1.0 and 10.0, respectively, to match those of
the corresponding spinscale in the paint tool options.
Add gimp_color_panel_dialong_response() to GimpColorPanel, which
emits a response for the color panel's color dialog, if shown.
Add a "response" signal to GimpColorPanel, which is emitted upon
color dialog response.
In both cases, the response is a GimpColorDialogState, which should
be either GIMP_COLOR_DIALOG_OK or GIMP_COLOR_DIALOG_CANCEL, and not
an actual dialog response id.
Better factorize by reusing code rather than recreating a combo box
which does basically the same thing. I only added a boolean parameter to
retrieve only the sublist of manual language.
It also takes advantage of the self-translated language names from
initialization.
When the manual in your current language is not installed, yet other
manuals are available, the help dialog will now propose either to read
the manual online (as was already the case) or to select a manual in
another language instead. This is even more important since we don't
have as many manuals as localizations of GIMP. Therefore if one took the
explicit step to install a manual in another language, it makes sense
that means one may know the alternative language. As an example, we have
3 Chinese localizations (zh_CN|TW|HK) but only a zh_CN manual. I could
definitely imagine someone with a zh_HK GUI to go for the zh_CN manual
as a fallback. Or other languages even, whatever!
This is a first step. Right now once one chose the alternative help
language, it is not possible to reset it yet (except by editing
"help-locales" in gimprc). The next step will be to add the settings in
Help System preferences.
...in both the core and libgimp.
Images now know what the default mode for new layers is:
- NORMAL for empty images
- NORMAL for images with any non-legacy layer
- NORMAL_LEGAVY for images with only legacy layers
This changes behavior when layers are created from the UI, but *also*
when created by plug-ins (yes there is a compat issue here):
- Most (all?) single-layer file importers now create NORMAL layers
- Screenshot, Webpage etc also create NORMAL layers
Scripts that create images from scratch (logos etc) should not be
affected because they usually have NORMAL_LEGACY hardcoded.
3rd party plug-ins and scripts will also behave old-style unless they
get ported to gimp_image_get_default_new_layer_mode().
this commit changes just those which make no difference to
functionality: property and object member defaults that get overridden
anyway, return values of g_return_val_if_fail(), some other stuff.
Add "gboolean with_filters" to gimp_drawable_calculate_histogram(),
which is passed as FALSE in almost all places, except the histogram
dockable where we want to see both the drawable's unmodified histogram
*and* the histogram after filters are applied.
- trailing whitespaces cleaned out;
- vectors are called "path" in all visible strings;
- do not check for floating selection and active channel: oppositely to
layers, a vector can be selected in the same time as a channel, and
while there is a floating selection.
More than 2000 lines of code less in app/, instead of
if (instance->member)
{
g_object_unref/g_free/g_whatever (instance->member);
instance->member = NULL;
}
we now simply use
g_clear_object/pointer (&instance->member);
Don't offset the ui range of op properties that use pixel-distance
units to the top-left corner of the region, since they're relative;
only do that for pixel-coordinate units. Let their ui range be
[0, width/height].
Pass a "GimpCreateControllerFunc" to all gimppropgui-*.[ch]
constructors which takes a callback (to update the config object when
the on-canvas GUI) and a controller type that determines the
callback's signature, and returns another callback (to update the
on-canvas GUI when the config object changes).
In GimpOperationTool, pass such a GimpCreateControllerFunc that
handles creating and adding on-canvas controller via the new
gimpfiltertool-widgets.[ch]. So far, a simple line like in the
blend tool is supported.
Add a custom GUI for gegl:spiral, and have its origin, radius and
angle controlled by such a line.
Thanks to Lionel N. who bugged me with his Windows installation where
the XML file was not found by GIMP. We should output a warning when this
happens so that packagers can detect the issue and the expected
installation path for this dependency.
The reporter wants me to call him "Padawan Lionel" but I won't fall for
it! Or did I? :-D
This way, you can increment repeated messages even when not the last
one and you don't overflow the error dialog needelessly when 2 errors
repeat one after another.
by encoding them directly in the string attached to all filter
actions. The code now supports both "gegl:some-operation" and
"gegl:some-operation\n<serialized config>".
Add "default_settings" to GimpGeglProcedure to store the settings of
the invoking action, much like the "default_run_mode" member.
Change filters-commands.c to parse the new operation string, create
GimpGeglProcedures with the deserialized settings, and use those
settings when the procedures are ran.
Change the filter history to be smarter about what is already in the
history, there can now be several different procedures with the same
name.
Remove the dilate and erode actions from the drawable group, and add
them to filters, they are just special cases of value-propagate with
fixed settings.
so they show up in recent filters, and don't need their own callbacks.
This has the problem that they now show a GUI with no options, but
that simply puts on more pressure to fix this general uglyness of ops
without editable properties.
Commit 1e6acbd4e1 modified the
generated enum recipes to run gimp-mkenums from the source
directory, instead of the build directory, so that only the
basenames of the corresponding header files would appear in
the comment at the top of the generated files. This was a
mistake -- $(GIMP_MKENUMS) is expecting to be invoked from the
build directory.
Switch back to running gimp-mkenums from the build directory. To
avoid including the relative path from the build directory to the
source directory in the generated file, add a @basename@ production
variable to gimp-mkenums, which exapnds to the basename of the
input file, and use it instead of @filename@ in the recipes for the
generated enum files.
When regenerating an enum file, don't copy it back to the source
directory if it hasn't actually changed. This allows using a read-
only source directory where the enum header is newer than the
generated file, as long as they're not really out of sync.
OTOH, *do* touch the generated source-dir file even when unchanged,
in order to avoid re-running its recipe on the next build, however,
allow this to silently fail (which is harmless).
"layers-text-tool" action shows as "Text Tool" while "vectors-path-tool"
shows as "Path Tool". That's very confusing with tools-text and
tools-vectors respectively.
These actions are mostly about entering in edit mode with the active
layer or path. For text layers, it will enter text edition on canvas,
whereas just open the attributes edition dialog on other layers. For
consistency, layers-text-edit is renamed as well too layers-edit-text.
This also fix the side effect of commits 10099bd and 526918b where I
didn't realize that layers-text-tool was also working on non text layers
on purpose (being very badly named). Now there is a separate layers-edit
and layers-edit-text.
Thanks to Pat David for English corrections. :-)
Add support for The following GEGL op property keys, which shall
contain GUM expressions of the specified type, controlling the
corresponding UI attributes of the property's widget:
- sensitive [boolean]: controls widget sensitivity.
- visible [boolean]: controls widget visibility.
- label [string]: controls widget label (or the label of the
associated label widget).
- description [string]: controls widget tooltip text.
When any of above keys are present, the values they evaluate to take
precedence over the static values the corresponding attributes would
otherwise have.
GUM is a small DSL, used in some property keys of GEGL operations
to dynamically control UI attributes based on context. This commit
only adds an interpreter for the language; see the next commit for
the actual handling of the relevant keys.
See the comment at the top of gimppropgui-eval.c for a description
of the language.
Note that the interpreter is licensed under the LGPL.
We check them into git, so this makes it easier to keep them in
sync when using a separate build directory.
Case in point -- this commit also syncs a few enum files that went
out-of-sync with their headers.
Add a boolean 'pick_abyss' parameter to GimpCreatePickerFunc. When
this parameter is TRUE, the picker should pick outside the bounds
of the drawable. Use FALSE for color pickers, and TRUE for position
pickers.
and use them for the new image in "Paste as new image". We were using
the resolution and unit of the image the paste command was invoked
from, which is entirely random and useless.
