Add an undo_desc field to GimpTransformToolClass, which subclasses
should set to the tool's default undo description. Provide a
default implementation for the get_undo_desc() vfunc, which returns
(a copy of) undo_desc. This simplifies transform tools that have a
static undo descrption, as well as provides a fallback when a
detailed undo description can't be generated (not currently
relevant, but will be used in the next commit).
(cherry picked from commit d549440650)
In GimpMeasureTool, don't try to access the "straighten" button
when halting the tool if it's NULL, which can happen when the
measure tool is selected upon startup, but is changed before its
tool-options GUI is constructed.
(cherry picked from commit 7fc5698f32)
... does not restore the measure points
Halt the measure tool after straightening, thus removing the
expectation that undoing the operation should restore the original
points.
Halting the tool, rather than making undo work "as expected",
sidesteps several issues:
- Implementing undo correctly is tricky, since image-undo and
tool-undo are handled separately.
- In fact, the measure tool doesn't provide tool-undo, so that
image edits can be undone while the tool is active without
affecting the tool, and it's not clear that we want to change
this behavior. However, this makes undoing a straighten
operation a special case, and it's not entirely clear what the
behavior should be when undoing other kinds of transformations,
or when the measure points had changed since the straighten
operation.
- Perhaps most importantly, measure tool points are restricted to
the pixel grid, which means that when measuring an angle
against an orientation that's not fully horizontal or vertical
in image space (either using a 3-point angle, or when the
canvas is rotated), the resulting transformed point after
straightening doesn't generally land on the pixel grid, causing
it to be rounded, which can result in a non-zero angle after
the rotation. This is especially ugly, since clicking
"straighten" again at this point would cause another non-
trivial rotation.
(cherry picked from commit 2e08c9164a)
Bind the "orientation" property of the measure-tool options to the
tool's compass widget's "orientation" property, instead of manually
synchronizing their values.
(cherry picked from commit 7a91aabf37)
Add an "orientation" option to the measure tool, corresponding to
the "orientation" property of GimpToolCompass (i.e., it controls
the orientation against which the angle is measured, when not in 3-
point mode.) The orientation is "auto" by default, so that the
angle is always <= 45 deg. Note that the "orientation" option
affects the tool's "straighten" function, so that the layer is
rotated toward the current orientation.
Use the "pixel-angle" and "unit-angle" properies of
GimpToolCompass to read the measured angle, instead of duplicating
the angle-measurement logic, in particular, so that we benefit from
the improvements/fixes of the previous commit.
(cherry picked from commit cb3b7a1ba5)
Add an "orientation" property to GimpToolCompass, which can be one
of "auto", "horizontal", or "vertical", and which controls the
orientation of the line against which the angle is measured, when
not in 3-point mode (previously, the line would always be
horizontal.) When "orientation" is "auto", the orientation is
automatically set to either horizontal or vertical, such that the
measured angle is <= 45 deg.
Keep the line horizontal, or vertical, in display-space, rather
than in image-space, so that the compass works correctly even when
the canvas is rotated and/or flipped.
Fix the compass's behavior when the image's horizontal and vertical
resolutions are different, both with and without dot-for-dot.
Add "pixel-angle" and "unit-angle" read-only properties, which
return the measured angle either with or without taking the image's
resolution into account, respectively. These properties will be
used by the measure tool in the next commit, instead of having it
implement its own angle calculation.
(cherry picked from commit d2f33cf1be)
Derive GimpMeasureTool from GimpTransformTool (and
GimpMeasureOptions from GimpTransformOptions), so that we can reuse
GimpTransformTool's logic for the "straighten" function. This
simplifies the code, aligns the measure tool with the rest of the
transform tools in terms of transform-related options (it can now
transform selections and paths, in addition to layers, and the
resampling method and clipping behavior are adjustable,) and fixes
straightening of layer groups.
Rename the function from "auto straighten" to just "straighten".
Don't resize the canvas after straightening. Since we only
transform the active layer, and not the entire image, resizing the
canvas doesn't make much sense.
When in 3-point mode, rotate the second point toward the third
point, rather than toward the x-axis.
(cherry picked from commit b0cf2e435a)
Instead just transform the measurement extremities appropriately to
still map to the same points.
To do so, I also added out parameters to gimp_image_resize_to_layers()
so that calling code can get offsets from old origin (as well as new
image dimensions).
(cherry picked from commit d56a8d439e)
In particular, this tool should not make huge rotation where the top
ends up in the bottom and it should not depend on whether we started the
measure tool from the left, right, bottom or top. This is fixed by using
atan() instead of atan2().
Also make a proper tooltip text. Help id is unneeded most likely though.
Finally do some cleaning and alignment.
(cherry picked from commit ba1d937dfb)
This reverts 2069496af3 for
gimpmeasuretool.c, we can't use gimp_display_shell_get_line_status()
here because the angle to show is *not* the angle as shown in the
paint tools (between x1,y1 and x2,y2), it is determined by a possible
third point.
Also, the info window and the statusbar were using different
coordintates to detemine the line length. This would have been easily
fixable, but the wrong angle wasn't.
Change gimp_tool_set_active_modifier_state() to honor the new
GimpToolControlSetting. Explicitly set the mode to SEPARATE in
all tools that require modifier keys during a stroke.
And here comes the actual fix: change GimpTransformTool and
GimpToolTransformGrid to use SAME mode, and remove their
active_modifer_key() and hover_modifier() impls, so it makes no
difference whether a modifier is pressed before of after mouse button
press/release.
We were leaking all tool widgets set with gimp_draw_tool_set_widget(),
and those having signal connections to e.g. the display shell were
doing things when they were supposed to be gone. Fixes make check.
- factor out widget creation to new start() function
- and tool shutdown to new halt() function
- connect to "response" and remove key_press()
- remove oper_update(), it was doing the same as the draw tool impl
Try to sort all GIMP_ICON_* defines into FDO categories like in
https://specifications.freedesktop.org/icon-naming-spec/latest/ar01s04.html
Add defines for all icons we override, rename some icons to their FDO
standard names, and mark the ones we duplicate with a comment so we
don't forget to rename those to standard names in 3.0.
Nobody has them anymore, and they are deprecated in GTK+ 3.x. This
also fixes all conflicting mnemonics except those I missed, but we can
fix them now.
When working with high resolution, you may have cases where measured
length won't be displayed with enough digits; i.e. several pixels length
would show up as 0. For instance at 4000 PPI, up to 7 pixels show up as
0 mm, then at 0.1 mm from the 8th pixel (actually reaching over 0.05 mm,
approximating as 0.1), then 0.2 at 24 pixels (actually: 0.152), and so
on. At such a resolution, 3 digits are needed for 'mm' instead of the
1 digit returned by gimp_unit_get_digits() so that we display reliable
lengths.
Therefore we need to compute ideal digit precision. Configured digits
for a given unit will now be used as a minimum value, but actually used
digits may be higher.
gimp_suggest_modifiers(): change "shift_format" and "control_format"
parameters to "extend_selection_format" and "toggle_behavior_format",
which fixes the longstanding problem that the function did the right
thing only by accident.
tools: use gimp_get_extend_selection_mask() instead of GDK_SHIFT_MASK
which is not 100% semantically correct in all cases, but at least a
step in the right direction to make the tool modifiers easier to
improve.
There is now a preference option that determines whether windows
should be opened on the same monitor as before. It should be disabled
when the machine gets monitors plugged/unplugged dynamically ("laptop")
and enabled when there is a static multi-monitor setup ("wokstation").
This is merely the current simplistic policy on top of the newly added
underlying infrastructure:
- pass integer monitor numbers around in all places where we already
pass around a GdkScreen. Pass the "current" monitor to these changed
APIs, where "current" is either the monitor where the action-triggering
widget is, or if that is unavailable the monitor where the mouse is.
- add gimp_widget_get_monitor() in order to easily get to the monitor,
just like gtk_widget_get_screen().
- add screen and monitor parameters in some places that were missed
before.
- in sessionrc, save all window positions relative to the window's
monitor, and save the monitor separately, if it's not the screen's
primary monitor.
- when restoring window positions, use the stored monitor when the new
prefs options says so (use the screen's primary monitor if there is
no stored monitor), otherwise use current monitor that is now passed
around.
On tool change, we used to simply halt tools before switching to the
new one, which meant losing ongoing live-previewed tool changes, like
transforms, warps and color corrections. This change makes them being
applied to the image instead before switching to the new tool:
Add enum value GIMP_TOOL_ACTION_COMMIT that is passed to
GimpTool::control() before tool switching. Handle the new enum value
in all tools, and actually commit the previewed stuff. This changes
the behavior of GimpCageTool, GimpImageMapTool, GimpTransformTool and
GimpWarpTool.
There are still many uses of literal SHIFT and MOD1 left, but all uses
of CONTROL are gone. Should work exactly as before on Win/X11, and
still has some glitches on OSX.
not GimpCanvasLine* etc. We keep them around as items, and their
constructors return items, and it's getting more code anyway when
porting away from pause/resume, so let's keep the casting minimal at
least.
Change the "GtkWidget *parent" parameter of GimpToolDialog to
"GimpDisplayShell". Also add API gimp_tool_dialog_set_shell() so an
existing dialog can be used on different images. Make sure the dialog
closes when the shell is unmapped (like when switching tabs in SWM),
and make the dialog transient for the toplevel GimpImageWindow.
Change all tool dialog users accordingly.
