...if "Show rulers" is disabled
Add HACK to gimp_display_shell_canvas_realize() that makes sure the
rulers are always mapped once for each new GimpDisplayShell. This
seems to magically fix all the crashes.
Before you get too exceited -- no, this commit doesn't integrate
transform previews into the image graph :) We still use a
separate canvas-item overlay, just like before, but instead of
using an impromptu implementation to render the preview, we use
gegl:transform. We properly adjust the matrix passed to the op
according to the display scale, so that we still render only as
much as needed.
This is both notably faster than the current code, and, for
perspective transforms, more accurate.
This reverts commit 36258a671a.
This commit was making the rotated canvas rendering quite horrible to
the point that I think it would make the canvas rotation feature barely
usable. See bug 759287, comments 13 to 18.
I think we will need to find other ways to accelerate rendering.
Compromise on quality is possible, but I think that in this case, this
was more than just a compromise. It was more like completely abandonning
quality. We could even see the lines "spiking" while you were rotating!
Like your drawing was alive!
Improve the disabling/enabling of extended input events for the
canvas during enter/leave-notify events, in particular, so that
enter-notify events that are a result of pointer ungrabbing don't
erroneously reeanble extended input events.
Something about the unqueueing and requeueing of the entire event
queue during motion compression fries GTK's brain w.r.t. extended
input events. Instead, have gimp_display_shell_compress_motion()
return the first non-compressed event to the caller, making it
responsible for dispatching it after handling the motion event.
...outside area of Crop Tool -> Highlight option
Add "highlight-opacity" property and turn the controlling GUI into an
expanding toggle that reveals an opacity slider.
After commit 8029508fbe, we always
render the image in chunks that are at most
GIMP_DISPLAY_RENDER_BUF_WIDTH x GIMP_DISPLAY_RENDER_BUF_HEIGHT,
even when the window's scale factor is > 1.
Replace the "lock brush size to zoom" paint option with a "lock
brush to view" option, which links the entire brush transform to
the view transform, so that the brush remains invariant in display
space under scaling, rotation, and reflection.
When you move an endpoint in the Blend Tool, angle and distance
information are especially important, in case you want to draw a
gradient with specific values.
Currently Blend tool only shows the vector coordinates whose usefulness
is a bit of a question. Now it will also show distance (in current shell
unit) and angle!
Add an offset_angle parameter to gimp_constrain_line(), which
offsets the radial lines by a given angle.
Add gimpdisplayshell-utils.[ch], with two new functions:
- gimp_display_shell_get_constrained_line_offset_angle():
Returns the offset angle to be passed to
gimp_constrain_line(), in order to constrain line angles in
display space, according to the shell's rotation angle and
flip mode.
- gimp_display_shell_constrain_line(): A convenience function
which calls gimp_constrain_line() with the said offset angle.
Use the new functions in all instances where we constrain line
angles, so that angles are constrained in display space, rather
than image space.
The only exception is GimpEditSelectionTool, which keeps
constraining angles in image space, since it's not entirely obvious
that we want to constrain angles of dragged layers/selections in
display space.
Add gimp_display_shell_[un]transform_with_scale(), which are
similar to gimp_display_shell_[un]transform(), however, they
transform the bounding box to/from uniformly-scaled image space,
given the scale factor as a parameter. These functions are more
accurate than using gimp_display_shell_[un]transform() and applying
the scaling separately, in particular, when the scale matches the
(horizontal or vertical) display scale.
Use these functions in gimp_display_shell_draw_image(), to avoid an
off-by-one error when transforming screen-space chunks to image-
space chunks, which leads to the symptoms described in the bug.
Fix another potential off-by-one error affecting non-uniformly
scaled images, and window scale factors other than 1.
Use CAIRO_FILTER_FAST when painting the xfer surface to the
screen. This notably improves performance when the canvas is
rotated, at the cost of lower filtering quality.
Based on a patch by Massimo.
Move the entire image-space/screen-space transformation logic from
gimp_display_shell_render() to gimp_display_shell_draw_image(), so
that the former works entirely in image space, and do the chunking
and clipping in screen-space, making sure that image-space chunks
are never larger than
GIMP_DISPLAY_RENDER_BUF_WIDTH x GIMP_DISPLAY_RENDER_BUF_HEIGHT,
even when the window's scale factor is greater than 1.
Add a GIMP_BRICK_WALL environment variable, which, when set, shows
the screen-space chunk bounds.
...is a regression in common cases
Commit the free select tool on double click inside the polygon.
Done by implementing GimpCanvasItem::hit() in GimpCanvasPolygon, using
ugly code.
Update the dprod production of generated enum files to include
abbreviated value descriptions, as per the previous commits.
Add a comment for translators above the abbreviated descriptions,
specifying the full description they abbreviate.
Now add also flip information in the status bar so that one knows that
the canvas is flipped horizontally and/or vertically. Especially if you
often flip and rotate the canvas (or if you did it by mistake), at some
point, it may become confusing to remember whether this is the case. Now
it will be possible to check in a single glimpse at the status bar.
Similarly to what I previously did for the rotation information, hitting
the flip icons in status will allow to unflip easily without having to
go in menus or remember all shortcuts.
These information will be visible only when the canvas is flipped or
rotated.
In GimpCanvasTransformPreview, use the transform matrix to
determine if we're doing a perspective transform, rather than
relying on a separate property, so that we don't use the slow
perspective path unnecessarily.
Consequently, remove the does_perspective member of
GimpTransformTool, since it's no longer used.
Return FALSE from gimp_display_shell_has_filter() when there are
filters, but they're all disabled, to avoid unnecessary extra
color conversions during rendering.
When we have display filters, break the color profile transform in
two: first, convert from the image profile to sRGB, then apply the
filters, then convert from sRGB to the monitor profile.
When a display filter's configure() function returns NULL, use a
propgui for the filter, instead of not showing a widget at all, to
spare filters the need to manually construct a configuration gui.
When processing display filters, shift the filter buffer to the
top-left corner of the render area, and pass the actual render
area, instead of an area whose top-left coords are (0, 0), to the
display filter. This allows for position-dependent display
filters.
Change gimp_tool_set_active_modifier_state() to honor the new
GimpToolControlSetting. Explicitly set the mode to SEPARATE in
all tools that require modifier keys during a stroke.
And here comes the actual fix: change GimpTransformTool and
GimpToolTransformGrid to use SAME mode, and remove their
active_modifer_key() and hover_modifier() impls, so it makes no
difference whether a modifier is pressed before of after mouse button
press/release.
Allow propgui constructors to specify an (optional) callback function
when creating pickers, to be called when a color/coordinate is picked,
similarly to controller callbacks.
Implement picker callback support in GimpFilterTool. When the active
picker has an associated callback function, call it instead of the
class's color_picked() function.
Add lots of "#include <gegl.h>" to .c files that miss it, which is
now necessary, since this commit adds a Babl* parameter in
propgui-types.h.
Add parameters, controlling the behavior and appearance of sliders,
to GimpControllerSlider. The macro GIMP_CONTROLLER_SLIDER_DEFAULT
expands to a nonmodifiable lvalue of type GimpControllerSlider,
whose members are initialized with the most common default values.
Handle the new parameters in GimpToolLine. A slider using the new
"autohide" mode is only visible when selected, or when the cursor
is close enough to the line, between the slider's min and max
values, and no other handle is grabbed or hovered-over.
... which is emitted when a handle is single/double/tripple clicked.
The signal handler returns a boolean value. A return value of TRUE
stops further event processing, while a return value of FALSE allows
it.
The signal is emitted when a slider is dragged away from the line,
and will be removed when the button is released, and when the
slider is dragged back to the vicinity of the line, and won't be
removed. The last parameter of the signal is a boolean flag
differentiating between the two cases.
Note that a remove-slider signal may be emitted without a preceeding
prepare-to-remove-slider signal, however, is a prepare-to-remove-
slider signal is emitted with a TRUE last parameter, it must be
eventually followed by a remove-slider signal, or by another
prepare-to-remove-slider signal with a FALSE last parameter.
Add support for adding and removing sliders to/from a GimpToolLine,
using three new signals:
- can-add-slider: Takes a double argument in the range [0,1],
indicating a location along the line, and returns a boolean
value, indicating whether a slider can be added at that
location.
- add-slider: Takes a double argument in the range [0,1],
indicating a location along the line, for which can-add-slider
returned TRUE. In response, should add a new slider at that
location, and return its index, or a negative value if no
slider was added.
- remove-slider: Takes a slider index. In response, may remove
the slider.
On the UI side, when the cursor is close enough to the line, but
not within the hit area of an existing handle, GimpToolLine checks
if a slider can be added at the cursor position, using can-add-
slider. If a slider can be added, a dashed circle appears at the
cursor position along the line, indicating where a slider will be
added. The cursor is added by clicking, which emits an add-slider
signal; if the signal returns a slider index, the new slider is
selected, and can be subsequently dragged.
Removing a slider is done by either selecting the slider and
pressing backspace (or delete, although we don't actually forward
it to the tool atm,) or by "tearing" the slider: when dragging
the slider, if the cursor is far enough from the liner, a dashed
circle appears around the slider, and releasing the mouse removes
the slider.
En route to on-canvas gradient editing, add support for persistent
handle selection to GimpToolLine (a handle being either an endpoint
or a slider). Handles are selected through clicking, however,
unlike before, the selection persists after the mouse is released.
A new "selection" property specifies the currently-selected handle
(who knows, maybe in the future we'll add multi-selection), and a
new "selection-changed" signal is emitted when the selection changes.
The visual feedback has been changed to better suit the new behavior,
and the behaviors yet to be added: The selected handle is marked
using highlighting; the highlighting doesn't change while hovering
over other handles. Only the hit-test circle is used as hover
indication, however, we use a fixed-size circle, and only show the
circle for the currently hovered-over handle -- no more trippy
expanding circles :)
A few minor changes along the way:
- The selected handle is now the (first) one that's closest to the
cursor, instead of the first one to pass hit-testing.
- We don't move the selectd handle upon button-press, only upon
motion, so that handles can be selected without moving them.
- Show a MOVE cursor modifier when hovering over a handle.
In gimp_canvas_sample_point_get_extents(), use the drawn number's
actual size instead of some random constant that was good enough for
my own font size.
Updating the cursor information involves sampling the active image/
drawable, which can be expensive, especially if there are filters
active that also respond to cursor motion, e.g., while using the
warp tool.
Move the actual updating to an idle function. This dramatically
improves responsiveness in these situations.
...in both the core and libgimp.
Images now know what the default mode for new layers is:
- NORMAL for empty images
- NORMAL for images with any non-legacy layer
- NORMAL_LEGAVY for images with only legacy layers
This changes behavior when layers are created from the UI, but *also*
when created by plug-ins (yes there is a compat issue here):
- Most (all?) single-layer file importers now create NORMAL layers
- Screenshot, Webpage etc also create NORMAL layers
Scripts that create images from scratch (logos etc) should not be
affected because they usually have NORMAL_LEGACY hardcoded.
3rd party plug-ins and scripts will also behave old-style unless they
get ported to gimp_image_get_default_new_layer_mode().
During constrained motion, round the slider value before clamping
it, so that the slider limits are always enforced. Additionally,
snap the slider to 1/12-ths of the line length, rather than
1/24-ths.
Make sure that sliders can never have negative-zero values, which
can result in a -inf base for spiral.
and update the grid as soon as a constraint is changed, not only on
the next motion. Change GimpTransformTool to forward the events to the
widget if it exists, but still handle them if it doesn't (yes this
code duplication is ugly, but the widget can hardly handle events if
it doesn't exist...).
More than 2000 lines of code less in app/, instead of
if (instance->member)
{
g_object_unref/g_free/g_whatever (instance->member);
instance->member = NULL;
}
we now simply use
g_clear_object/pointer (&instance->member);
Add supprt for placing sliders on a GimpToolLine -- handles that can
be dragged over the line. The sliders are accesible through a new
"sliders" property, and via the gimp_tool_line_{get,set}_sliders()
functions.
Add a slider-line controller, which works like a line controller,
but whose callback also supplies/takes an array of sliders.
Note that the data type for individual sliders is called
GimpControllerSlider (in particular, it's not line specific), so
that we may use it with other controller/tool-widget types in the
future.
- introduce new state "boolean is_first" which tracks if the currently
drawn rectangle is the first with this instance
- cancel the widget if there was no movement when creating the first
rectangle
- undo to the previous rectangle if the user created a zero-extent
rectangle
- also undo to the previous rectangle if a newly drawn rectangle is
canceled with button-3 release
because of bailing out early after emitting "response". Instead, don't
ref the object around this function, and move the "response" emission
to the end of the function.
- unset "rect_adjusting" before bailing out on button_release()
- update the integer rectangle when the double properties change
- don't try to show handles with a size of < 3
- remove unused members
- shorten some variable names
which is a replacement for GimpRectangleTool. It's a massive piece of
code and I'm not sure everyting works as it should, but it seems to do
crop stuff without any glitches.
and a default key_press() handler that emits CONFIRM, CANCEL and RESET
responses. Remove code with the same purpose from all subclasses.
Change tools feed key_press() to the widget and connect to its
"response" instead of implementing key_press() themselves. This will
only be better and less code after the tool side of this is done
generically.
Rename gimp_tool_widget_snap_offsets() to set_snap_offsets(),
and add gimp_tool_widget_get_snap_offsets().
Also rename gimp_tool_widget_status() to set_status(), and
add new function and signal set_status_coords().
which is the code that calculates handle size based on pointer
proximity. Use the new function in GimpToolHandleGrid and
GimpToolLine, and clean up some stuff in GimpToolLine.
Simply use g_object_bind_property() to connect the grid properties of
GimpTransformOoptions and GimpToolTransformGrid and remove all other
grid property setting code.
so widgets can return which handle was clicked. The values boolean
semantics stay the same so if(retval) gives the same result. This is
useful for the upcoming transform tool widgets.
When compressing tool motion events, only compress motion events
at the front of the event queue, targeted at the same widget as,
and having similar characteristics to, the initial motion event;
stop compressing upon the first mismatched event.
Previously, all pending motion events targeted at the canvas were
compressed, stopping only at a button-release event targeted at the
canvas. As a result, when adding a guide by dragging from a ruler,
there could be a situation where a pending button-release event
targeted at the ruler would be followed by motion events targeted at
the canvas, with a cleared state mask. These motion events would
get compressed to the initial motion event targeted at the ruler,
resulting in a motion event with a cleared state mask being processed
before the said button-release event. This, in turn, would cause the
guide tool's cursor_update function to be called, while the tool is
still active, emitting a CRITICAL. Sheesh.
The moral of the story is: let's play it safe.
which encapsulates a bunch of GimpCanvasItems plus their interaction,
using GimpTool-like virtual functions like button_press(),
button_release() motion() etc. Also has GimpDrawTool-like API to
manage the canvas items of its subclasses.
Call gimp_canvas_group_remove_item() and don't just unref them, so
their state gets restored and signals get disconnected. They may not
be owned by the group, or have other external references.
Simply increase its change_count in dispose(). There is really no
reason to build expensive update regions and emitting signals when we
are about to go away.
Commit 1e6acbd4e1 modified the
generated enum recipes to run gimp-mkenums from the source
directory, instead of the build directory, so that only the
basenames of the corresponding header files would appear in
the comment at the top of the generated files. This was a
mistake -- $(GIMP_MKENUMS) is expecting to be invoked from the
build directory.
Switch back to running gimp-mkenums from the build directory. To
avoid including the relative path from the build directory to the
source directory in the generated file, add a @basename@ production
variable to gimp-mkenums, which exapnds to the basename of the
input file, and use it instead of @filename@ in the recipes for the
generated enum files.
When regenerating an enum file, don't copy it back to the source
directory if it hasn't actually changed. This allows using a read-
only source directory where the enum header is newer than the
generated file, as long as they're not really out of sync.
OTOH, *do* touch the generated source-dir file even when unchanged,
in order to avoid re-running its recipe on the next build, however,
allow this to silently fail (which is harmless).
Limit the number of lines drawn in the transform tool canvas grid to
one line every 5 image pixels. This should probably be done in display
pixels, didn't change that yet.
We check them into git, so this makes it easier to keep them in
sync when using a separate build directory.
Case in point -- this commit also syncs a few enum files that went
out-of-sync with their headers.
gimp_unit_get_digits() won't return relevant information when using
higher resolution. gimp_unit_get_scaled_digits() will provide the right
amount of details relatively to the actual print resolution of the
active image.
and use them for the new image in "Paste as new image". We were using
the resolution and unit of the image the paste command was invoked
from, which is entirely random and useless.
The abbreviated commit hash we show in the shell and the about
dialog is currently just the last 7 characters of 'git describe',
based on the assumption that abbreviated hashes are always 7-digits
long. When the hash is longer than that, we're just showing a
nonsense commit.
This was never a good idea, since users can override this, and
since disambiguation can result in longer hashes, but since git
2.11, the default abbreviated hash length is determined based on
the size of the repository, which currently results in 10 digits
for us.
Let's just do it right.
Try to sort all GIMP_ICON_* defines into FDO categories like in
https://specifications.freedesktop.org/icon-naming-spec/latest/ar01s04.html
Add defines for all icons we override, rename some icons to their FDO
standard names, and mark the ones we duplicate with a comment so we
don't forget to rename those to standard names in 3.0.
In DEs which use a global menu, such as Unity, updating the menu
can be expensive. This particularly affects canvas scaling and
rotation, for which updating the menu synchronously causes notable
lag.
